MOT Status
ExpiredMileage
112,942 miSignificantly above average — investigate
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))
Nearside Front Lower Suspension arm ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))
Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner sill (5.3.6 (a) (i))
Nearside Track rod end ball joint dust cover excessively damaged or deteriorated so that it no longer prevents the ingress of dirt (2.1.3 (g) (ii))
Offside Front Lower Suspension arm ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))
Power steering fluid reservoir empty (2.1.5 (b) (ii))
Power steering malfunctioning (2.1.5 (a))
Power steering pipe/hose leaking (2.1.5 (a))
Nearside Front Track rod end ball joint has slight play (2.1.3 (b) (i))
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive chassis (5.3.6 (a) (i))
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive chassis (5.3.6 (a) (i))
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive inner sill (5.3.6 (a) (i))
Offside Rear Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))
Oil leak, but not excessive (8.4.1 (a) (i))
Registration plate deteriorated but not likely to be misread (0.1 (b))
Coolant leak ()
Front Registration plate deteriorated but not likely to be misread (0.1 (b))
Nearside Headlamp lens slightly defective (4.1.1 (b) (i))
Nearside Rear Inner Suspension component mounting prescribed area is corroded but not considered excessive sill (5.3.6 (a) (i))
Nearside Rear Outer Suspension component mounting prescribed area is corroded but not considered excessive sill (5.3.6 (a) (i))
Offside Front Tyre worn close to legal limit/worn on edge edges (5.2.3 (e))
Offside Headlamp lens slightly defective (4.1.1 (b) (i))
Offside Rear Inner Suspension component mounting prescribed area is corroded but not considered excessive sill (5.3.6 (a) (i))
Offside Rear Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))
Oil leak, but not excessive (8.4.1 (a) (i))
Nearside Front Coil spring fractured or broken (5.3.1 (b) (i))
Power steering malfunctioning (2.1.5 (a))
Nearside Rear Tyre has ply or cords exposed (5.2.3 (d) (ii)) DANGEROUS
Coolant leak ()
Front Registration plate deteriorated but not likely to be misread (0.1 (b))
Nearside Headlamp lens slightly defective (4.1.1 (b) (i))
Nearside Rear Inner Suspension component mounting prescribed area is corroded but not considered excessive sill (5.3.6 (a) (i))
Nearside Rear Outer Suspension component mounting prescribed area is corroded but not considered excessive sill (5.3.6 (a) (i))
Offside Front Tyre worn close to legal limit/worn on edge edges (5.2.3 (e))
Offside Headlamp lens slightly defective (4.1.1 (b) (i))
Offside Rear Inner Suspension component mounting prescribed area is corroded but not considered excessive sill (5.3.6 (a) (i))
Offside Rear Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))
Oil leak, but not excessive (8.4.1 (a) (i))
Nearside Headlamp lens slightly defective (4.1.1 (b) (i))
Nearside Rear Inner Suspension component mounting prescribed area is corroded but not considered excessive sill (5.3.6 (a) (i))
Nearside Rear Outer Suspension component mounting prescribed area is corroded but not considered excessive sill (5.3.6 (a) (i))
Offside Headlamp lens slightly defective (4.1.1 (b) (i))
Offside Rear Inner Suspension component mounting prescribed area is corroded but not considered excessive sill (5.3.6 (a) (i))
Oil leak, but not excessive (8.4.1 (a) (i))
offside rear tyre wearing inner edge
Emissions not tested exhaust broken (8.2.1.2 (d))
Rear Exhaust has a major leak of exhaust gases (6.1.2 (a))
Rear Exhaust silencer insecure (8.1.1 (b) (i))
Nearside Headlamp lens slightly defective (4.1.1 (b) (i))
Nearside Rear Inner Suspension component mounting prescribed area is corroded but not considered excessive sill (5.3.6 (a) (i))
Nearside Rear Outer Suspension component mounting prescribed area is corroded but not considered excessive sill (5.3.6 (a) (i))
Offside Headlamp lens slightly defective (4.1.1 (b) (i))
Offside Rear Inner Suspension component mounting prescribed area is corroded but not considered excessive sill (5.3.6 (a) (i))
Oil leak, but not excessive (8.4.1 (a) (i))
offside rear tyre wearing inner edge
Offside Rear Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))
Oil leak, but not excessive (8.4.1 (a) (i))
Engine MIL inoperative or indicates a malfunction (8.2.1.2 (h))
Exhaust Lambda reading after 2nd fast idle outside specified limits (8.2.1.2 (c))
Offside Front Headlamp aim projected beam image is obviously incorrect No beam pattern (4.1.2 (c))
Nearside Head lamp beam image faint
Offside Rear Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))
Oil leak, but not excessive (8.4.1 (a) (i))
Rear Exhaust has a minor leak of exhaust gases (6.1.2 (a))
Front Registration plate deteriorated but not likely to be misread (0.1 (b))
Oil leak, but not excessive (8.4.1 (a) (i))
clips missing lower ball joint dust covers
water inside nearside rear lamp unit
Nearside Front Service brake excessively binding (1.2.1 (f))
Offside Headlamp aim so that beam "kick up" is not visible on the screen (4.1.2 (a))
Offside Rear Service brake excessively binding (1.2.1 (f))
Front Registration plate deteriorated but not likely to be misread (0.1 (b))
Nearside Rear Service brake binding but not excessively (1.2.1 (f))
Oil leak, but not excessive (8.4.1 (a) (i))
clips missing lower ball joint dust covers
exhaust heat shield loose
nearside headlight in poor condition
water inside nearside rear lamp unit
Nearside Front Suspension arm ball joint dust cover deteriorated, but preventing the ingress of dirt (2.4.G.2)
Oil leak ()
slight binding rear brakes
Offside Front Track rod end ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt (2.2.C.1c)
Nearside Front Suspension arm ball joint dust cover deteriorated, but preventing the ingress of dirt (2.4.G.2)
Oil leak ()
slight binding rear brakes
Front Sub-frame corroded but not seriously weakened (2.4.G.1)
Oil leak ()
oil level low
Front Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.5b)
Front Sub-frame corroded but not seriously weakened (2.4.G.1)
oil leak
osr tyre perished in tread
Oil leak
surface corrosion on suspension ------osf sidelight dim
Nail in nearside rear tyre
Nearside Rear Tyre worn close to the legal limit (4.1.E.1)
Offside Rear Tyre worn close to the legal limit (4.1.E.1)
o/s/r tyre cracking
oil leak
Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Rear Exhaust system not adequately supported (7.1.1)
Nail in nearside rear tyre
Nearside Rear Tyre worn close to the legal limit (4.1.E.1)
Offside Rear Tyre worn close to the legal limit (4.1.E.1)
o/s/r tyre cracking
oil leak
Exhaust has part of the system slightly deteriorated (7.1.1a)
Front brake disc slightly pitted (3.5.1h)
Offside Front Front position lamp(s) not working (1.1.A.3b)
How Reliable is the Mazda 2?
Based on 1,902,862 MOT tests across 147,013 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
SR04 FYB is a 2004 Mazda 2 in Grey with a 1,400cc petrol engine. This vehicle has been through 24 MOT tests with a personal pass rate of 66.7%.
Across all 2004 Mazda 2 models, the average MOT pass rate is 76.5% with a typical mileage of 55,318 miles. This particular vehicle has a lower pass rate than the average for its year, which may indicate maintenance issues worth investigating.
The most common reason a Mazda 2 fails its MOT is tyre tread depth below requirements of 1.6mm, accounting for 18,380 recorded failures. If you're considering buying SR04 FYB, it's worth having these areas checked by a mechanic before committing.
The Mazda 2 typically stays on UK roads for around 23 years. At 22 years old, this Mazda 2 is approaching the upper end of the typical lifespan for this model.
Frequently Asked Questions
How do I check the history of SR04 FYB?
You can check the full history of SR04 FYB by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was SR04 FYB registered?
SR04 FYB is a 2004 Mazda 2, first registered on 23 August 2004.
Is SR04 FYB safe to buy?
The MOT history for SR04 FYB shows 24 tests with a 66.7% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does SR04 FYB have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on SR04 FYB. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.