2006 Ford Focus C-max

Rear Exhaust mounting defective (6.1.2 (a))

Brake hose excessively deteriorated both rear (1.1.12 (b) (ii))

Headlamp aim projected beam image is obviously incorrect both (4.1.2 (c))

Rear Brake pad(s) less than 1.5 mm thick (1.1.13 (a) (ii)) DANGEROUS

Tyre tread depth below requirements of 1.6mm both front (5.2.3 (e)) DANGEROUS

Rear Exhaust mounting defective (6.1.2 (a))

Engine MIL inoperative or indicates a malfunction (8.2.1.2 (h))

Offside Front Outer Drive shaft joint constant velocity boot split or insecure, no longer prevents the ingress of dirt (6.1.7 (g) (ii))

Offside Rear Subframe mounting prescribed area is inadequately repaired (5.3.6 (a) (i))

Front Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Nearside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Nearside Rear Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Offside Rear Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))

Offside Rear Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Rear Brake pad(s) wearing thin (1.1.13 (a) (ii))

Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Rear Subframe mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

rear brake disc covers corroded

Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength innersill (5.3.6 (a) (i))

Offside Rear Suspension arm corroded and seriously weakened (5.3.3 (b) (i))

Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength innersill (5.3.6 (a) (i))

Stop lamp(s) not working (4.3.1 (a) (ii))

Nearside Front Tyre has ply or cords exposed (5.2.3 (d) (ii)) DANGEROUS

Front Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Nearside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Nearside Rear Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Offside Rear Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))

Offside Rear Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Rear Brake pad(s) wearing thin (1.1.13 (a) (ii))

Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Rear Subframe mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

rear brake disc covers corroded

Offside Front Drive shaft joint constant velocity boot split or insecure, no longer prevents the ingress of dirt (6.1.7 (g) (ii))

Offside Front Tyre tread depth below requirements of 1.6mm (5.2.3 (e)) DANGEROUS

Nearside Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Rear Exhaust mounting defective (6.1.2 (a))

areas of corrosion not excessive at this time

Rear Exhaust mounting defective (6.1.2 (a))

Registration plate lamp inoperative in the case of a single lamp or all lamps (4.7.1 (b) (ii))

areas of corrosion not excessive at this time

Offside Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Tyre worn close to legal limit/worn on edge both front (5.2.3 (e))

areas of corrosion not excessive at this time

Offside Inner Drive shaft joint constant velocity boot severely deteriorated (6.1.7 (g) (i))

areas of corrosion not excessive at this time

Offside Inner Drive shaft joint constant velocity boot severely deteriorated (6.1.7 (g) (i))

Offside Outer Drive shaft joint constant velocity boot split or insecure, no longer prevents the ingress of dirt (6.1.7 (g) (ii))

areas of corrosion not excessive at this time

heavy surface corrosion to suspension components

Nearside Rear Brake pipe slightly corroded (3.6.B.2c)

areas of corrosion not excessive at this time

Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Nearside Rear Brake pipe slightly corroded (3.6.B.2c)

Nearside Registration plate lamp not working (1.1.C.1d)

areas of corrosion not excessive at this time

Engine covers fitted obscuring some components in the engine bay

Under-trays fitted obscuring some underside components

Vehicle's internal headlight adjuster altered to recheck lights

Offside Rear Tyre worn close to the legal limit (4.1.E.1)

Nearside Rear Tyre worn close to the legal limit (4.1.E.1)

Exhaust has part of the system slightly deteriorated (7.1.1a)

Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

Nearside Outer Front brake disc slightly scored (3.5.1h)

n/s outer sill sligtly damage