2008 Mazda 6

Offside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Engine MIL inoperative or indicates a malfunction (8.2.2.2 (g))

Nearside Parking brake inoperative on one side (1.4.1 (a))

Nearside Rear Service brake excessively binding (1.2.1 (f))

Parking brake efficiency below requirements (1.4.2 (a) (i))

Offside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Offside Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Nearside Front Brake pipe excessively corroded (1.1.11 (c))

Nearside Front Service brake excessively binding (1.2.1 (f))

Offside Front Brake pipe excessively corroded (1.1.11 (c))

Offside Rear Brake pipe excessively corroded (1.1.11 (c))

Nearside Front Lower Suspension arm ball joint has slight play (5.3.4 (a) (i))

Offside Rear Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Offside Rear Service brake fluctuating, but not excessively (1.2.1 (e))

Offside Front Anti-roll bar linkage ball joint excessively worn (5.3.4 (a) (i))

Offside Front Position lamp not working (4.2.1 (a))

Supplementary restraint system warning lamp indicates a fault (7.1.6 (a))

Parking brake efficiency less than 50% of the required value (1.4.2 (a) (ii)) DANGEROUS

Front Brake pipe corroded, covered in grease or other material both (1.1.11 (c))

Offside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Rear Brake pad(s) wearing thin (1.1.13 (a) (ii))

the emissions limits were tested and met but the DSM couldn’t register the reading

Under-trays fitted obscuring some underside components

Nearside brake caliper has restricted free movement (3.5.1k)

Offside Registration plate lamp not working (1.1.C.1d)

Rear Brake pad(s) less than 1.5 mm thick (3.5.1g)

Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

Parking brake lever has little reserve travel (3.1.6b)

Parking brake: parking brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.7)

Rear brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

Under-trays fitted obscuring some underside components

Offside Front front brake binding (3.7.B.1)

Parking brake: efficiency below requirements (3.7.B.7)

front brake application uneven (3.7.B.2)

Nearside Front Brake pad(s) wearing thin (3.5.1g)

Offside Front Brake pad(s) wearing thin (3.5.1g)

Nail in nearside rear tyre

n/s/f/ tyre has two cuts on tread pattern

o/s/f/ tyre has cut on tread pattern

o/s/r/ tyre worn on edges and cut on inner edge

rear tyres worn low [advise new tyres]

Nearside Front Front position lamp(s) not working (1.1.A.3b)

Nearside Front Windscreen wiper blade insecure (8.2.2)

Nearside Rear rear brake binding (3.7.B.1)

Nail in nearside rear tyre

Nail in offside front tyre

n/s/f/ tyre has two cuts on tread pattern

o/s/f/ tyre has cut on tread pattern

o/s/r/ tyre worn on edges and cut on inner edge

rear tyres worn low [advise new tyres]

Front Brake pad(s) less than 1.5 mm thick (3.5.1g)

Nearside Rear brake disc in such a condition that it is seriously weakened (3.5.1i)

Rear Brake pad(s) less than 1.5 mm thick (3.5.1g)

Nearside Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

Offside Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

Offside Rear brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.5b)

Nail in offside rear tyre

Nearside Rear Brake pad(s) wearing thin (3.5.1g)

Offside Rear Brake pad(s) wearing thin (3.5.1g)