2002 Yamaha XTZ660

Drive chain slightly loose (6.1.7 (c) (i))

Rear Suspension arm ball joint worn, but not excessively (5.3.4 (a) (i))

Rear Wheel bearing has slight play (5.1.3 (a) (i))

chassis has some corrosion but not excessive

exhaust has some corrosion but not excessive

Rear Brake pivot worn, but not excessively (1.1.15 (b))

Rear Suspension rod pin, bush or joint worn but not resulting in excessive movement (5.3.4 (a) (i))

Front Tyre tread depth is below minimum requirements of 1.0mm (4.1.3(ii))

handlebars deformed

Exhaust noisy (7.1.2)

Rear suspension bearing has slight free play (2.4.A2a(i))

Front wheel bearings are slightly rough (2.3.5b)

Registration plate character(s) likely to be misread (6.3.4b)

Registration plate deteriorated (6.3.1d)

Registration plate faded (6.3.1d)

Exhaust is leaking but is not excessively noisey (7.1.1b)

Exhaust is leaking but is not excessively noisey (7.1.1b)

Rear Roller brake test indicates slight fluctuation of brake effort (3.3.A1d)

Rear Tyre tread depth is below minimum requirements of 1.0mm (4.1.3(ii))

Drive chain worn but not considered excessive (6.2.1e)

Exhaust slightly deteriorated (7.1.1a)

Rear Drive chain sprocket slightly worn (6.2.1e)

Front Floor brake test indicates a binding brake (3.3.C2c)

Rear Tyre tread depth is below minimum requirements of 1.0mm (4.1.3(ii))

Roller brake test The less effective brake control does not achieve an efficiency of 25%. (3.3.A2b)

Drive chain worn but not considered excessive (6.2.1e)

Exhaust is leaking but is not excessively noisey (7.1.1b)

Exhaust slightly deteriorated (7.1.1a)

Rear Drive chain sprocket slightly worn (6.2.1e)