2002 Fiat Ducato

Offside Front Headlamp not working on dipped beam (4.1.1 (a) (ii))

Central Exhaust has a minor leak of exhaust gases main hanger leaking (6.1.2 (a))

Central advise ns and os inner wheel arches undersealed

under cab undersealed

Horn not working (7.7 (a))

Nearside Front Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength wheel arch (5.3.6 (a) (i))

Nearside Inner Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced step (6.1.1 (c) (i))

Nearside Outer Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced step (6.1.1 (c) (i))

Offside Front Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength wheel arch (5.3.6 (a) (i))

Offside Headlamp not working on dipped beam (4.1.1 (a) (ii))

Offside Inner Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced step (6.1.1 (c) (i))

Offside Outer Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced step (6.1.1 (c) (i))

Windscreen washer not working (3.5 (a))

advise ns and os inner wheel arches undersealed

advise underside undersealed

Front Registration plate deteriorated but not likely to be misread (0.1 (b))

Front Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Nearside Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Offside Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

advise ns and os front inner wheel arches undersealed

advise ns and os inner and outer sills undersealed

Front Registration plate deteriorated but not likely to be misread (0.1 (b))

Front Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Nearside Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Offside Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Parking brake lever has excessive movement indicating incorrect adjustment (1.1.6 (c))

advise ns and os front inner wheel arches undersealed

advise ns and os inner and outer sills undersealed

Front Registration plate deteriorated but not likely to be misread (0.1 (b))

Front Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

advise ns and os front inner wheel arches heavily undersealed

advise ns and os inner and outer sills undersealed

Horn not working (7.7 (a))

Front Registration plate deteriorated but not likely to be misread (0.1 (b))

Front Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

advise ns and os front inner wheel arches heavily undersealed

advise ns and os inner and outer sills undersealed

Nearside Front Brake prescribed area is excessively corroded (1.1.21 (e) (i))

Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength shocker (5.3.6 (a) (i))

Offside Front Brake prescribed area is excessively corroded (1.1.21 (e) (i))

Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength shocker (5.3.6 (a) (i))

Offside Front Wheel bearing rough when rotated (5.1.3 (b) (i))

Offside Headlamp not working on dipped beam (4.1.1 (a) (ii))

Offside Front Subframe mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected (5.3.6 (a) (ii)) DANGEROUS

Front Sub-frame is corroded but structural rigidity is not significantly reduced radiator mount (6.1.1 (c) (i))

Nearside Front Integral body structure is corroded but structural rigidity is not significantly reduced inner wheel arch (6.1.1 (c) (i))

Nearside Front Integral body structure is corroded but structural rigidity is not significantly reduced outer sill/step (6.1.1 (c) (i))

Nearside Front Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Offside Front Drive shaft joint constant velocity boot severely deteriorated (6.1.7 (g) (i))

Offside Front Integral body structure is corroded but structural rigidity is not significantly reduced inner wheel arch (6.1.1 (c) (i))

Offside Front Integral body structure is corroded but structural rigidity is not significantly reduced outer sill/step (6.1.1 (c) (i))

Offside Front Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Offside Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Nearside Front Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Nearside Front Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Nearside Rear Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Offside Front Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Offside Front Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Offside Rear Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Offside Vehicle structure is corroded but structural rigidity is not significantly reduced step/floor (6.1.1 (c) (i))

Oil leak, but not excessive (8.4.1 (a) (i))

Sub-frame is corroded but structural rigidity is not significantly reduced radiator mount (6.1.1 (c) (i))

Integral body structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Nearside Front Service brake binding but not excessively (1.2.1 (f))

Nearside Front Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Nearside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Offside Front Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Offside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Offside Front Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Offside Front Vehicle structure is corroded but structural rigidity is not significantly reduced inner and outer step (6.1.1 (c) (i))

Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Service brake requirements only just met. It would appear that the braking system requires adjustment or repair (1.2.1 (c))

Vehicle structure is corroded but structural rigidity is not significantly reduced radiator mount (6.1.1 (c) (i))

Nearside Rear Tyre has a lump, caused by separation or partial failure of its structure (5.2.3 (d) (ii)) DANGEROUS

Integral body structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Nearside Front Service brake binding but not excessively (1.2.1 (f))

Nearside Front Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Nearside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Offside Front Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Offside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Offside Front Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Offside Front Vehicle structure is corroded but structural rigidity is not significantly reduced inner and outer step (6.1.1 (c) (i))

Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Service brake requirements only just met. It would appear that the braking system requires adjustment or repair (1.2.1 (c))

Vehicle structure is corroded but structural rigidity is not significantly reduced radiator mount (6.1.1 (c) (i))

Front Registration plate deteriorated but not likely to be misread (0.1 (b))

Offside Front Suspension component mounting prescribed area damaged but not considered excessive (5.3.6 (a) (i))

Offside Front Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Offside Headlamp reflector slightly defective (4.1.1 (b) (i))

handbrake reserve travel limited

Offside Rear Shock absorbers light misting of oil or has limited damping effect (5.3.2 (b))

Nearside Front Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting cab rear inner panel (6.2.2 (d) (i))

Nearside Front Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting outer sill of cab (6.2.2 (d) (i))

Offside Front Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting jacking point (6.2.2 (d) (i))

Offside Rear Shock absorbers light misting of oil or has limited damping effect (5.3.2 (b))

Nearside Front Anti-roll bar linkage rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Offside Front Anti-roll bar linkage rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

both rear tyres have light cracking

nearside inner sill corroded

Nearside Front Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Nearside Front constant velocity joint gaiter deteriorated to the extent that it no longer prevents the ingress of dirt etc (2.5.C.1a)

Nearside Front Anti-roll bar linkage rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Offside Front Anti-roll bar linkage rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

both rear tyres have light cracking

nearside inner sill corroded

both rear tyre sidewalls deteriorated

Brake load sensing valve seized (3.6.E.3)

Nearside Headlamp has a product on the lens so that the light output is severely reduced (1.7.5a)

Nearside Windscreen wiper does not clear the windscreen effectively (8.2.2)

Offside Headlamp has a product on the lens so that the light output is severely reduced (1.7.5a)

Offside Windscreen wiper does not clear the windscreen effectively (8.2.2)

both rear tyre sidewalls deteriorated

Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

exhaust system deteriorated

Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

Nearside Front Direction indicator incorrect colour (1.4.A.2f)

Nearside Headlamp aim too low (1.8)

Offside Front Direction indicator incorrect colour (1.4.A.2f)

Offside Side repeater not working (1.4.A.2c)

exhaust system deteriorated

Both rear tyres have light cracking in tread.

Exhaust system starting to corrode.

Front brake discs starting to corrode.

Front wipers in poor condition but still clearing screen.

Nearside Front Suspension spring mounting prescribed area is excessively corroded (2.4.A.3)

Nearside Rear position lamp(s) not working (1.1.A.3b)

Offside Front Brake hose modified and seriously weakened (3.6.A.3)

Offside Front Headlamp not working on dipped beam (1.7.5a)

Offside Front Suspension spring mounting prescribed area is excessively corroded (2.4.A.3)

Stop lamp not working (1.2.1b)

Both rear tyres have light cracking in tread.

Exhaust system starting to corrode.

Front brake discs starting to corrode.

Front wipers in poor condition but still clearing screen.

Exhaust system badly corroded but not blowing.

Light corrosion on front brake discs.

Exhaust system badly corroded but not blowing.

Light corrosion on front brake discs.

Offside Rear Rear position lamp(s) not working (1.1.A.3b)

Both front brake discs starting to corrode.

Coolant leak.

Exhaust system heavly corroded.

O/s/f tyre has had tempory puncture repair.

Offside Front Front constant velocity joint gaiter deteriorated to the extent that it no longer prevents the ingress of dirt etc (2.5.C.1a)

Offside Front Subframe mounting prescribed area is excessively corroded (2.4.A.3)

Offside Front Windscreen wiper does not clear the windscreen effectively (8.2.2)

Offside Rear Rear position lamp(s) not working (1.1.A.3b)

Stop lamp not working (1.2.1b)

Both front brake discs starting to corrode.

Coolant leak.

Exhaust system heavly corroded.

O/s/f tyre has had tempory puncture repair.

Centre Rear Brake load sensing valve seized (3.6.E.3)

Nearside All position lamps not working (1.1.A.3b)

Nearside front sidemarker bulb inoperative

Offside front brake pad shim catching brake disc

Radiator leaking

Rear Exhaust has part of the system slightly deteriorated (7.1.1a)

centre stop lamp inoperative

Nearside rear brake binding (3.7.B.1)

Radiator cooling fins in poor condition.

Brake load sensing valve linkage seized (3.6.E.3)

Nearside Front Windscreen washer provides insufficient washer liquid (8.2.3)

Offside Front Windscreen washer provides insufficient washer liquid (8.2.3)

Nearside Stop lamp not working (1.2.1b) DANGEROUS

Nearside rear brake binding (3.7.B.1) DANGEROUS

Offside Stop lamp not working (1.2.1b) DANGEROUS

Stop lamp not working (1.2.1b) DANGEROUS

Radiator cooling fins in poor condition.

Offside Windscreen wiper does not clear the windscreen effectively (8.2.2)

Offside front brake binding (3.7.B.1)

Offside rear brake binding (3.7.B.1)

Brakes imbalanced across an axle (3.7.B.5b) DANGEROUS

Horn not working (1.6.2a)

Nearside Front Front wheel bearing rough when rotated (2.5.A.2) DANGEROUS