2003 Subaru Impreza

arm corroded

underbody and sub frames corroded

Brake performance unable to be tested (1.2.1 (g))

Emissions unable to be completed major leak front down pipe (8.2.1.2 (d))

Front Sub-frame corroded and seriously weakened (5.3.3 (b) (i))

Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength jack point (5.3.6 (a) (i))

Nearside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill (5.3.6 (a) (i))

Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength jack point (5.3.6 (a) (i))

Offside Rear Brake disc significantly and obviously worn (1.1.14 (a) (i))

Offside Rear Suspension component mounting prescribed area is inadequately repaired tin foil inner sill (5.3.6 (a) (i))

Offside Front Suspension arm ball joint has slight play (5.3.4 (a) (i))

Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Rear Suspension arm corroded but not seriously weakened all (5.3.3 (b) (i))

underbody corroded

Exhaust has a minor leak of exhaust gases (6.1.2 (a))

Nearside Rear Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Nearside Rear Service brake fluctuating, but not excessively (1.2.1 (e))

Offside Front Brake hose has slight corrosion to ferrule (1.1.12 (f) (i))

Offside Front Service brake binding but not excessively (1.2.1 (f))

Offside Rear Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Offside Rear Service brake fluctuating, but not excessively (1.2.1 (e))

Fuel pipe leaking (6.1.3 (b) (i))

Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))

Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner sill and inner arch (5.3.6 (a) (i))

Offside Front Position lamp not working (4.2.1 (a) (ii))

Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner arch (5.3.6 (a) (i))

Nearside Rear Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Offside Front Brake hose has slight corrosion to ferrule (1.1.12 (f) (i))

Offside Front Service brake binding but not excessively (1.2.1 (f))

Offside Rear Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Front Exhaust has a minor leak of exhaust gases (6.1.2 (a))

Offside Front fog light lens broken

Engine MIL inoperative or indicates a malfunction (8.2.1.2 (h))

Exhaust emissions - engine idle speed too high idle to low (8.2.1.2 (e))

Nearside Front Brake pipe excessively corroded (1.1.11 (c))

Offside Front Brake pipe likely to become detached or damaged (1.1.11 (d) (ii))

Front Exhaust has a minor leak of exhaust gases (6.1.2 (a))

Offside Front fog light lens broken

Emissions not tested Due to mil light illuminated on dash (8.2.1.2 (d))

Engine MIL inoperative or indicates a malfunction (8.2.1.2 (h))

Nearside Inner Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced Sill Area (6.1.1 (c) (i))

Nearside Rear Inner Integral body structure inadequately repaired such that structural rigidity is significantly reduced Sill Area, not fully welded/repaired (6.1.1 (d) (i))

Nearside Rear Position lamp not working (4.2.1 (a) (ii))

Offside Front Headlamp aim not tested (4.1.2 (b))

Offside Front Headlamp not working on dipped beam (4.1.1 (a) (ii))

Offside Inner Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced Sill Area (6.1.1 (c) (i))

Offside Rear Tyre has a tear, caused by separation or partial failure of its structure (5.2.3 (d) (ii)) DANGEROUS

Front Exhaust has a minor leak of exhaust gases (6.1.2 (a))

Front Oil leak, but not excessive (8.4.1 (a) (i))

Front Registration plate deteriorated but not likely to be misread (0.1 (b))

Front Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Nearside Front Shock absorbers has light misting of oil (5.3.2 (b))

Nearside Rear Integral body structure is deformed but structural rigidity is not significantly reduced Sill Area (6.1.1 (a) (i))

Offside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Offside Front Fog lamp lens deteriorated.

Offside Rear Fuel Pipe/s corroded Filler pipes ()

Engine MIL inoperative or indicates a malfunction (8.2.1.2 (h))

Nearside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced inner sill (7.1.1 (a) (i))

Offside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced inner sill (7.1.1 (a) (i))

engine light on

Engine management light on

Exhaust emissions Lambda reading after 2nd fast idle outside specified limits (7.3.D.3)

Exhaust has a major leak of exhaust gases (7.1.2)

Offside Front Brake pad(s) less than 1.5 mm thick (3.5.1g)

Engine management light on

Offside Rear Driveshaft boot split

Exhaust emissions Lambda reading after 2nd fast idle outside specified limits (7.3.D.3)

Exhaust has a major leak of exhaust gases Front and rear (7.1.2)

Nearside Front coil spring broken (2.4.C.1a)

Nearside Front position lamp(s) not working (1.1.A.3b)

Offside Front coil spring broken (2.4.C.1a)

Offside Rear Driveshaft boot split

Engine management light illuminated.

Front Exhaust has a minor leak of exhaust gases (7.1.2)

Nearside Front Anti-roll bar rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Offside Front Anti-roll bar rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive Strut turret. (2.4.A.3)

Body has a sharp edge caused by damage Front fog light lens. (6.1.C.1)

Nearside Front Anti-roll bar linkage ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt (2.4.G.2)

Nearside Front Tyre has ply or cords exposed (4.1.D.1b)

Nearside Rear Brake pipe excessively corroded (3.6.B.2c)

Offside Front Anti-roll bar linkage ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt (2.4.G.2)

Offside Rear Brake pipe excessively corroded (3.6.B.2c)

Offside Rear Brake pipe excessively corroded Both through floor (3.6.B.2c)

Front Exhaust has a minor leak of exhaust gases (7.1.2)

Nearside Front Anti-roll bar rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Offside Front Anti-roll bar rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive Strut turret. (2.4.A.3)

Brake pipe slightly corroded (3.6.B.2c)

Nearside Front Tyre worn close to the legal limit (4.1.E.1)

Offside Front Tyre worn close to the legal limit (4.1.E.1)

Offside Rear Brake pipe slightly corroded (3.6.B.2c)

Nearside Headlamp aim too high (1.8)

Offside Rear Brake pipe slightly corroded (3.6.B.2c)

Brake pipe slightly corroded (3.6.B.2c)

Nearside Rear Shock absorber has a light misting of oil (2.7.3)

Brake pipe slightly corroded (3.6.B.2c)

Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Nearside Registration plate lamp not working (1.1.C.1d)

Nearside Windscreen wiper does not clear the windscreen effectively (8.2.2)

Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Offside Rear Shock absorber has a serious fluid leak (2.7.3)

Offside Registration plate lamp not working (1.1.C.1d)

Offside Windscreen wiper does not clear the windscreen effectively (8.2.2)

Nearside Registration plate lamp not working (1.1.5c)

Tyre not fitted in accordance with side wall instructions (4.1.D.1f)