2006 Peugeot 107

Brake disc worn, pitted or scored, but not seriously weakened both fronts (1.1.14 (a) (ii))

Exhaust mounting defective centre mounting broken but still supported by another mounting (6.1.2 (a))

Offside Front Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))

Windscreen wiper blade defective (3.4 (b) (i))

Nearside Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))

Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Outer sill (5.3.6 (a) (i))

Offside Rear Service brake lagging in operation (1.2.1 (d))

Central Exhaust mounting defective (6.1.2 (a))

Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Front Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (1.2.1 (b) (i))

Nearside Front Lower suspension arm rear bush bonding splitting

Nearside Rear Tyre obviously under inflated (5.2.3 (l))

Offside Front Anti-roll bar linkage pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Offside Front Bumper becoming insecure

Offside Front Lower suspension arm rear bush bonding splitting

Offside Headlamp becoming insecure

Battery insecure and likely to cause a short circuit (4.13 (a) (ii))

Nearside Front Anti-roll bar linkage pin or bush excessively worn (5.3.4 (a) (i))

Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength outer sill (5.3.6 (a) (i))

Windscreen washer provides insufficient washer liquid (3.5 (a))

Exhaust mounting defective (6.1.2 (a))

Offside Front Anti-roll bar linkage pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Front Brake pad(s) less than 1.5 mm thick x2 (1.1.13 (a) (ii)) DANGEROUS

n/s rear brake pipe slightly corroded.

n/s rear tyre 2mm

rear exhaust mount secured with hose clamp.

Front Windscreen wiper does not clear the windscreen effectively (8.2.2)

Horn not working (1.6.2a)

Offside Front Headlamp aim beam image obviously incorrect (1.8.A.1b)

Offside Rear Brake pipe excessively corroded (3.6.B.2c)

n/s rear brake pipe slightly corroded.

n/s rear tyre 2mm

rear exhaust mount secured with hose clamp.

Front brake disc in such a condition that it is seriously weakened both (3.5.1i)

Headlamp aim too low both (1.8)

Horn not working (1.6.2a)

Offside Front Anti-roll bar rubber bush deteriorated resulting in excessive movement (2.4.G.2)

Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Offside Rear Shock absorber has a serious fluid leak (2.7.3)

Offside Registration plate lamp not working (1.1.C.1d)

Windscreen washer provides insufficient washer liquid (8.2.3)

Windscreen wiper does not clear the windscreen effectively (8.2.2)

front brake application uneven (3.7.B.2)

Nearside Front Anti-roll bar rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Nearside Front Tyre worn close to the legal limit (4.1.E.1)

Exhaust emissions Lambda reading after 2nd fast idle outside specified limits (7.3.D.3)

Nearside rear brake recording little or no effort (3.7.B.5a)

Parking brake: efficiency below requirements (3.7.B.7)

Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

Rear Brake hose has slight corrosion to ferrules (3.6.B.4e)

Nearside Rear Tyre worn close to the legal limit (4.1.E.1)