2007 Peugeot 107

Integral body structure is corroded but structural rigidity is not significantly reduced under vehicle surface corroded and undersealed. (6.1.1 (c) (i))

Nearside Front Anti-roll bar linkage pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Nearside Rear Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Nearside Rear Subframe mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Offside Front Anti-roll bar linkage pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Offside Rear Subframe mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Oil leak, but not excessive drive shaft seal. (8.4.1 (a) (i))

Rear Sub-frame corroded but not seriously weakened heavily corroded and undersealed. (5.3.3 (b) (i))

Emissions unable to be completed exhaust leak. (8.2.1.2 (d))

Engine MIL inoperative or indicates a malfunction (8.2.1.2 (h))

Front Exhaust has a major leak of exhaust gases (6.1.2 (a))

Front Sub-frame corroded and seriously weakened (5.3.3 (b) (i))

Nearside Rear Brake pipe excessively corroded (1.1.11 (c))

Integral body structure is corroded but structural rigidity is not significantly reduced under vehicle surface corroded and undersealed. (6.1.1 (c) (i))

Nearside Front Anti-roll bar linkage pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Nearside Rear Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Nearside Rear Subframe mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Offside Front Anti-roll bar linkage pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Offside Rear Subframe mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Oil leak, but not excessive drive shaft seal. (8.4.1 (a) (i))

Rear Sub-frame corroded but not seriously weakened heavily corroded and undersealed. (5.3.3 (b) (i))

Integral body structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Nearside Front Position lamp not working (4.2.1 (a) (ii))

Nearside Rear Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced (6.1.1 (c) (i))

Offside Rear Tyre has a tear, caused by separation or partial failure of its structure (5.2.3 (d) (ii)) DANGEROUS

Integral body structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Front Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Integral body structure is corroded but structural rigidity is not significantly reduced floor pan (6.1.1 (c) (i))

Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Nearside Rear Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced sill (6.1.1 (c) (i))

Offside Rear Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced sill inner and outter (6.1.1 (c) (i))

Front Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Integral body structure is corroded but structural rigidity is not significantly reduced floor pan (6.1.1 (c) (i))

Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Nearside Front Brake hose ferrule excessively corroded (1.1.12 (f) (i))

Nearside Front Shock absorbers damaged to the extent that it does not function (5.3.2 (b))

Nearside Rear Brake hose ferrule excessively corroded (1.1.12 (f) (i))

Offside Front Brake hose ferrule excessively corroded (1.1.12 (f) (i))

Offside Front Outer Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced (6.1.1 (c) (i))

Offside Front Shock absorbers has a serious fluid leak (5.3.2 (b))

Offside Rear Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting (6.2.2 (d) (i))

Offside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced (6.1.1 (c) (i))

Rear rear bumper support beam corroded

Front Exhaust has a minor leak of exhaust gases (6.1.2 (a))

Nearside Brake pipe corroded, covered in grease or other material front to rear (1.1.11 (c))

Rear bump support beam corroded

both rear outer sill corroded

both side rear outer sills corroded

chasis corroded

general corrosion underbody

front subframe very rusty

Electronic power steering warning lamp indicates a system malfunction (2.6 (a))

Offside Brake pipe excessively corroded front to rear (1.1.11 (c))

Power steering malfunctioning (2.1.5 (a))

Nearside Front Tyre worn close to legal limit/worn on edge 3mm (5.2.3 (e))

corrosion to front subframe

corrosion to n/s front to rear brake pipe

corrosion to underside of vehicle

front exhaust mounting broken

Offside Rear Tyre not fitted in accordance with side wall instructions (4.1.D.1f)

Tyre worn close to the legal limit (4.1.E.1)

Nearside Front brake disc in such a condition that it is seriously weakened (3.5.1i)

Offside Front brake disc in such a condition that it is seriously weakened (3.5.1i)

Tyre worn close to the legal limit (4.1.E.1)

Nearside Front brake disc slightly scored (3.5.1h)

Offside Front brake disc slightly scored (3.5.1h)