2007 Peugeot 107

Front Registration plate deteriorated but not likely to be misread (0.1 (b))

Exhaust carbon monoxide content at idle exceeds default limits (8.2.1.2 (b))

Headlamp aim projected beam image is obviously incorrect Both front (4.1.2 (c))

Nearside Rear Vehicle structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting Inner sill (6.2.2 (d) (i))

Offside Rear Vehicle structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting Inner sill (6.2.2 (d) (i))

Windscreen wiper does not clear the windscreen effectively (3.4 (b) (ii))

Front Registration plate deteriorated but not likely to be misread (0.1 (b))

Nearside Front Wheel bearing slightly noisy (5.1.3 (b) (i))

Offside Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Offside Front Lower Suspension arm ball joint dust cover severely deteriorated (5.3.4 (b) (i))

Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Offside Rear Nail in tyre ()

Rear Parking brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (1.4.2 (a) (i))

front subframe and suspension components has surface corrosion

rear axle and suspension components has surface corrosion

Front Headlamp aim projected beam image is obviously incorrect both (4.1.2 (c))

Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner sill (5.3.6 (a) (i))

Offside Front Windscreen wiper does not clear the windscreen effectively (3.4 (b) (ii))

Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner sill (5.3.6 (a) (i))

Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Offside Rear Nail in tyre ()

Rear Parking brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (1.4.2 (a) (i))

front subframe and suspension components has surface corrosion

rear axle and suspension components has surface corrosion

Front Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Nearside Front Wheel bearing slightly noisy (5.1.3 (b) (i))

Offside Rear Road wheel slightly distorted (5.2.2 (c) (i))

Offside Rear Road wheel slightly distorted (5.2.2 (c) (i))

Rear Inner sills corrroding

Rear axle corroding

Exhaust Lambda reading after 2nd fast idle outside specified limits (8.2.1.2 (c))

Horn not working (7.7 (a))

Rear Inner sills corrroding

Rear axle corroding

Front Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Nearside Front Wheel bearing slightly noisy (5.1.3 (b) (i))

Offside Rear Road wheel slightly distorted (5.2.2 (c) (i))

Offside Rear Road wheel slightly distorted (5.2.2 (c) (i))

Rear axle corroding

Anti-lock braking system warning lamp indicates an ABS fault (1.6 (b))

Battery insecure and likely to cause a short circuit (4.13 (a) (ii))

Exhaust carbon monoxide content after 2nd fast idle exceeds default limits (8.2.1.2 (b))

Nearside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill (5.3.6 (a) (i))

Offside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill (5.3.6 (a) (i))

Offside Rear Shock absorbers has a serious fluid leak (5.3.2 (b))

Rear axle corroding

Front Brake pad(s) wearing thin (3.5.1g)

Nearside Front Anti-roll bar linkage has slight play in a pin/bush (2.4.G.2)

Nearside Front Lower Suspension arm ball joint dust cover deteriorated, but preventing the ingress of dirt (2.4.G.2)

Offside Front Anti-roll bar linkage has slight play in a pin/bush (2.4.G.2)

all under side of vehical starting to rust

rear axle rusting

Exhaust system not adequately supported (7.1.1)

Nearside Front Suspension arm rubber bush deteriorated resulting in excessive movement (2.4.G.2)

Offside Front Suspension arm rubber bush deteriorated resulting in excessive movement (2.4.G.2)

Offside Front Valve stem seriously damaged (4.1.D.1e)

Offside Headlamp aim beam image obviously incorrect (1.8.A.1b)

Offside Rear Brake pipe excessively corroded into flexi (3.6.B.2c)

Nearside Front Lower Suspension arm ball joint dust cover deteriorated, but preventing the ingress of dirt (2.4.G.2)

Nearside Front Tyre out of shape

Offside Rear Tyre badly out of shape and perished in tread

Rear axle beam mounts slightly perished

Nearside Stop lamp not working (1.2.1b)

Parking brake lever has no reserve travel (3.1.6b)

Parking brake: efficiency below requirements (3.7.B.7)

Nearside Front Lower Suspension arm ball joint dust cover deteriorated, but preventing the ingress of dirt (2.4.G.2)

Nearside Front Tyre out of shape

Offside Rear Tyre badly out of shape and perished in tread

Rear axle beam mounts slightly perished

Nearside Headlamp aim beam image obviously incorrect (1.8.A.1b)

Nearside rear brake binding (3.7.B.1)

Offside rear brake binding (3.7.B.1)

Parking brake: parking brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.7)

Nearside Front Headlamp aim beam image obviously incorrect (1.8.A.1b)

Nearside Rear Tyre has ply or cords exposed (4.1.D.1b)

Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Offside Rear Headlamp aim too low (1.8)

Parking brake: efficiency below requirements (3.7.B.7) DANGEROUS

Nearside Front Tyre worn close to the legal limit (4.1.E.1)

Offside Front Headlamp not working on dipped beam (1.7.5a)

Offside Rear fog lamp not working (1.3.2b)

Nearside Front Tyre has a bulge, caused by separation or partial failure of its structure (4.1.D.1b)

Offside Rear wheel bearing rough when rotated (2.6.1)

Offside Front Tyre worn close to the legal limit (4.1.E.1)