2008 Toyota Aygo

Front Brake disc worn, pitted or scored, but not seriously weakened both side (1.1.14 (a) (ii))

Front Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Front Suspension component corroded but not seriously weakened shock casing both side (5.3.3 (b) (i))

Nearside Front Anti-roll bar linkage pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Nearside Front Integral body structure is corroded but structural rigidity is not significantly reduced jacking point area (6.1.1 (c) (i))

Nearside Rear Integral body structure is repaired but structural rigidity is not significantly reduced (6.1.1 (d) (i))

Offside Front Anti-roll bar linkage pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Offside Front Service brake fluctuating, but not excessively (1.2.1 (e))

Offside Rear Integral body structure is corroded but structural rigidity is not significantly reduced jacking point area (6.1.1 (c) (i))

Parking brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (1.4.2 (a) (i))

Rear Coil spring corroded both side (5.3.1 (b) (i))

Rear Suspension component corroded but not seriously weakened axel including spring holder cup (5.3.3 (b) (i))

Rear Suspension component corroded but not seriously weakened shock casing both rear (5.3.3 (b) (i))

Front Sub-frame corroded but not seriously weakened has heavy surface corrosion (5.3.3 (b) (i))

Integral body structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Offside Lower outer sill surface corroded

Front Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Front Tyre worn close to legal limit/worn on edge both o/s and n/s (5.2.3 (e))

Rear Seat belt anchorage prescribed area is corroded but not considered excessive both o/s and n/s lower outer sills (7.1.1 (a) (i))

Front Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Nearside Front Lower Suspension arm pin or bush worn but not resulting in excessive movement rear bush (5.3.4 (a) (i))

Nearside Lower Seat belt anchorage prescribed area strength or continuity significantly reduced outer sill holed at both front and rear sections (7.1.1 (a) (i))

Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength body section holed near to rear axle mountings (5.3.6 (a) (i))

Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength body section holed near to rear axle mountings (5.3.6 (a) (i))

Front Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Nearside Front Lower Suspension arm pin or bush worn but not resulting in excessive movement rear bush (5.3.4 (a) (i))

Subframe mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Nearside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced lower outer sill (7.1.1 (a) (i))

Offside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced lower outer sill (7.1.1 (a) (i))

Rear Rear fog lamp not working (4.5.1 (a) (ii))

Subframe mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Exhaust has a minor leak of exhaust gases center/rear joint (6.1.2 (a))

Front Brake pad(s) wearing thin (1.1.13 (a) (ii))

Nearside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Offside Rear Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Nearside Brake pipe excessively corroded front to rear at rear (1.1.11 (c))

Offside Brake pipe excessively corroded front to rear at rear (1.1.11 (c))

Offside Front Wheel bearing rough when rotated (5.1.3 (b) (i))

Offside Rear Parking brake inoperative on one side (1.4.1 (a))

Offside Rear Service brake excessively binding (1.2.1 (f))

Offside Rear Stop lamp(s) not working (4.3.1 (a) (ii))

Parking brake efficiency below requirements (1.4.2 (a) (i))

Parking brake lever has excessive movement indicating incorrect adjustment (1.1.6 (c))

Exhaust has a minor leak of exhaust gases center/rear joint (6.1.2 (a))

Nearside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Offside Rear Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

offside rear wheel bearing not tested due to binding brake

Front Brake pad(s) wearing thin (1.1.13 (a) (ii))

Nearside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Offside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Nearside Front Tyre worn close to the legal limit inner edge (4.1.E.1)

Offside Front Tyre worn close to the legal limit inner edge (4.1.E.1)

Offside Rear brake grabbing

Nearside Rear Shock absorber has a light misting of oil (2.7.3)

Offside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Offside Rear Shock absorber has a light misting of oil (2.7.3)

o/s/r brake binding slightly

Nearside Rear Tyre worn close to the legal limit (4.1.E.1)

2 rear tyre treads starting to crack

Brakes imbalanced across an axle (3.7.B.5b)

Front brake disc in such a condition that it is seriously weakened (3.5.1i) DANGEROUS

Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1) DANGEROUS

2 rear tyre treads starting to crack

Offside Front Tyre worn close to the legal limit (4.1.E.1)