2009 Yamaha Yzf R125

Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Front Tyre worn close to the legal limit (5.2.3 (e))

Rear Brake disc worn, but not excessively (1.1.14 (a) (i))

Rear Drive chain slightly loose (6.1.7 (c) (i))

Rear rear shock has some light corrosion but not to excess

Rear swingarm has light corrosion but not to excess

Drive chain slightly loose (6.1.7 (c) (i))

Rear rear shock some corrosion but not excessive

Front Tyre has a lump or bulge caused by separation or partial failure of its structure (5.2.3 (d) (ii)) DANGEROUS

Front Steering damper slightly loose (2.1.4 (d) (i))

Rear rear brake hose fitting slight corrosion

Rear reg screws not dvsa standard

Drive chain slightly loose (6.1.7 (c) (i))

Rear Wheel bearing has slight play (5.1.3 (a) (i))

Steering headbearing has slight free play (2.2.2 (f) (i))

front suspension poor damping

Front Brake excessively binding (1.2.1 (f))

Drive chain slightly loose (6.1.7 (c) (i))

Rear Wheel bearing has slight play (5.1.3 (a) (i))

Steering headbearing has slight free play (2.2.2 (f) (i))

front suspension poor damping

Offside Rear Exhaust noisy (7.1.2)

Central Front Tyre tread depth is below minimum requirements of 1.0mm (4.1.3(ii))

Nearside Rear Lower Drive chain excessively loose (6.2.1d)

Nearside Front Brake pad(s) (sintered type) less than 1.0mm thick (3.2A1f(ii)) DANGEROUS

Offside Rear Brake pad(s) (sintered type) less than 1.0mm thick (3.2A1f(ii)) DANGEROUS

Offside Rear Exhaust noisy (7.1.2)

Offside Front Brake lever is bent but brake can still be readily applied (3.1.3c)

Rear Rear mono-shock pivot worn but not excessive (2.4.B.4)

Rear Tyre worn close to the legal limit (4.1.3(ii))

Nearside Footrest missing footrest is cracked and has sharp edges. (6.2.1a) DANGEROUS

Offside Rear Brake pedal has inadequate reserve travel The pedal is hitting the exhaust. (3.1.3b) DANGEROUS

Offside Front Brake lever is bent but brake can still be readily applied (3.1.3c)

Offside Rear Exhaust mounting deteriorated. (7.1.1.c)

Rear Rear mono-shock pivot worn but not excessive (2.4.B.4)

Rear Tyre worn close to the legal limit (4.1.3(ii))

Front Brake lever is bent but brake can still be readily applied (3.1.3c)

Front Floor brake test indicates a slightly grabbing brake (3.3.C2d)

Front fairing broken

Front suspension has a slightly reduced damping effect (2.3.6c)

Nearside rider footpeg broken/shortened

Rear Floor brake test indicates a slightly grabbing brake (3.3.C2d)

mirrors loose

Front Brake lever is bent but brake can still be readily applied (3.1.3c)

Rear reflector on motorcycle missing (1.4.1)