MOT Status
ExpiredMileage
111,499 miSignificantly above average — investigate
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Front Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))
General under body corrosion
Nearside Rear Suspension component corroded but not seriously weakened (5.3.3 (b) (i))
Offside Rear Suspension component corroded but not seriously weakened (5.3.3 (b) (i))
Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))
Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))
General corrosion
Offside Front Brake rod has restricted free movement (1.1.15 (e))
Offside Front Position lamp missing (4.2.1 (a) (ii))
Supplementary restraint system warning lamp indicates a fault (7.1.6 (a))
Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))
General corrosion
ALL UNDERBODY SHOWING SIGNS OF CORROSION
ALL UNDERBODY SHOWING SIGNS OF CORROSION
Engine MIL inoperative or indicates a malfunction (8.2.1.2 (h))
Front sub frame corroded
Rear sub frame corroded
Front Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))
Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))
Front Subframe mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Nearside Front Inner Integral body structure is corroded but structural rigidity is not significantly reduced Sill (6.1.1 (c) (i))
Nearside Rear Inner Integral body structure is corroded but structural rigidity is not significantly reduced Sill (6.1.1 (c) (i))
Offside Front Inner Integral body structure is corroded but structural rigidity is not significantly reduced Sill (6.1.1 (c) (i))
Offside Rear Inner Integral body structure is corroded but structural rigidity is not significantly reduced Sill (6.1.1 (c) (i))
Rear Subframe mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Front Subframe mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Front Windscreen washer not working (3.5 (a))
Nearside Front Inner Integral body structure is corroded but structural rigidity is not significantly reduced Sill (6.1.1 (c) (i))
Nearside Rear Inner Integral body structure is corroded but structural rigidity is not significantly reduced Sill (6.1.1 (c) (i))
Offside Front Inner Integral body structure is corroded but structural rigidity is not significantly reduced Sill (6.1.1 (c) (i))
Offside Rear Inner Integral body structure is corroded but structural rigidity is not significantly reduced Sill (6.1.1 (c) (i))
Rear Subframe mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Offside Rear Suspension component attachment bracket/mounting fractured top shock absorber mounting broken (5.3.3 (b) (ii)) DANGEROUS
Nearside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement rearmost (2.4.G.2)
Nearside front brake fluctuating, but not excessively (3.7.B.3)
Offside front brake fluctuating, but not excessively (3.7.B.3)
Nearside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Offside Front Tyre has a cut in excess of the requirements deep enough to reach the ply or cords (4.1.D.1a)
Offside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)
How Reliable is the Mazda 3?
Based on 2,040,939 MOT tests across 164,053 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
ST12 AMV is a 2012 Mazda 3 in Silver with a 1,598cc petrol engine. This vehicle has been through 16 MOT tests with a personal pass rate of 68.8%.
Across all 2012 Mazda 3 models, the average MOT pass rate is 80.6% with a typical mileage of 61,274 miles. This particular vehicle has a lower pass rate than the average for its year, which may indicate maintenance issues worth investigating.
The most common reason a Mazda 3 fails its MOT is tyre tread depth below requirements of 1.6mm, accounting for 40,716 recorded failures. If you're considering buying ST12 AMV, it's worth having these areas checked by a mechanic before committing.
The Mazda 3 typically stays on UK roads for around 22 years. At 14 years old, this Mazda 3 is well into its expected lifespan but still has years ahead.
Frequently Asked Questions
How do I check the history of ST12 AMV?
You can check the full history of ST12 AMV by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was ST12 AMV registered?
ST12 AMV is a 2012 Mazda 3, first registered on 30 March 2012.
Is ST12 AMV safe to buy?
The MOT history for ST12 AMV shows 16 tests with a 68.8% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does ST12 AMV have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on ST12 AMV. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.