MOT Status
ExpiredMileage
137,278 miSignificantly above average — investigate
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Nearside Front Tyre tread depth below requirements of 1.6mm (5.2.3 (e)) DANGEROUS
Offside Front Tyre tread depth below requirements of 1.6mm (5.2.3 (e)) DANGEROUS
Front Brake pad(s) wearing thin (1.1.13 (a) (ii))
Nearside Rear Brake hose has slight corrosion to ferrule (1.1.12 (f) (i))
Nearside Rear Subframe mounting prescribed area is corroded but not considered excessive inner sill (5.3.6 (a) (i))
Nearside Rear Suspension spring mounting prescribed area is corroded but not considered excessive chassis (5.3.6 (a) (i))
Nearside Seat belt anchorage prescribed area is corroded but not considered excessive outer sill (7.1.1 (a) (i))
Offside Drive shaft joint constant velocity boot severely deteriorated (6.1.7 (g) (i))
Offside Rear Brake hose has slight corrosion to ferrule (1.1.12 (f) (i))
Offside Rear Subframe mounting prescribed area is corroded but not considered excessive inner sill (5.3.6 (a) (i))
Offside Rear Subframe mounting prescribed area is corroded but not considered excessive outer sill (5.3.6 (a) (i))
Offside Rear Suspension spring mounting prescribed area is corroded but not considered excessive chassis (5.3.6 (a) (i))
Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))
Front Brake pad(s) wearing thin (3.5.1g)
Nearside Rear Brake hose has slight corrosion to ferrules (3.6.B.4e)
Nearside Rear Sub-frame attachment slightly corroded (2.4.G.1)
Nearside Rear Subframe mounting prescribed area is corroded but not considered excessive inner sill (2.4.A.3)
Nearside Rear Suspension spring mounting prescribed area is corroded but not considered excessive chassis (2.4.A.3)
Offside Front constant velocity joint gaiter deteriorated, but preventing the ingress of dirt (2.5.C.1a)
Offside Lower Front suspension ball joint dust cover deteriorated, but preventing the ingress of dirt (2.4.G.2)
Offside Rear Brake hose has slight corrosion to ferrules (3.6.B.4e)
Offside Rear Sub-frame attachment slightly corroded (2.4.G.1)
Offside Rear Subframe mounting prescribed area is corroded but not considered excessive outer sill (2.4.A.3)
Offside Rear Suspension spring mounting prescribed area is corroded but not considered excessive chassis (2.4.A.3)
Rear Sub-frame corroded but not seriously weakened (2.4.G.1)
Horn not working (1.6.2a)
Nearside Rear Subframe mounting prescribed area is excessively corroded outer sill (2.4.A.3)
Offside rear parking brake recording little or no effort (3.7.B.6a)
Front Brake pad(s) wearing thin (3.5.1g)
Nearside Rear Brake hose has slight corrosion to ferrules (3.6.B.4e)
Nearside Rear Sub-frame attachment slightly corroded (2.4.G.1)
Nearside Rear Subframe mounting prescribed area is corroded but not considered excessive inner sill (2.4.A.3)
Nearside Rear Suspension spring mounting prescribed area is corroded but not considered excessive chassis (2.4.A.3)
Offside Front constant velocity joint gaiter deteriorated, but preventing the ingress of dirt (2.5.C.1a)
Offside Lower Front suspension ball joint dust cover deteriorated, but preventing the ingress of dirt (2.4.G.2)
Offside Rear Brake hose has slight corrosion to ferrules (3.6.B.4e)
Offside Rear Sub-frame attachment slightly corroded (2.4.G.1)
Offside Rear Subframe mounting prescribed area is corroded but not considered excessive outer sill (2.4.A.3)
Offside Rear Suspension spring mounting prescribed area is corroded but not considered excessive chassis (2.4.A.3)
Rear Sub-frame corroded but not seriously weakened (2.4.G.1)
Nearside Rear Brake hose has slight corrosion to ferrules (3.6.B.4e)
Nearside Rear Sub-frame attachment slightly corroded (2.4.G.1)
Nearside Rear Subframe mounting prescribed area is corroded but not considered excessive chassis (2.4.A.3)
Nearside Rear Subframe mounting prescribed area is corroded but not considered excessive inner sill (2.4.A.3)
Nearside Rear Subframe mounting prescribed area is corroded but not considered excessive outer sill (2.4.A.3)
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive chassis (2.4.A.3)
Offside Front constant velocity joint gaiter deteriorated, but preventing the ingress of dirt (2.5.C.1a)
Offside Front suspension ball joint dust cover deteriorated, but preventing the ingress of dirt (2.4.G.2)
Offside Rear Brake hose has slight corrosion to ferrules (3.6.B.4e)
Offside Rear Sub-frame attachment slightly corroded (2.4.G.1)
Offside Rear Subframe mounting prescribed area is corroded but not considered excessive inner sill (2.4.A.3)
Offside Rear Subframe mounting prescribed area is corroded but not considered excessive outer sill (2.4.A.3)
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive chassis (2.4.A.3)
Offside Rear Suspension spring mounting prescribed area is corroded but not considered excessive chassis (2.4.A.3)
Rear Sub-frame corroded but not seriously weakened (2.4.G.1)
Parking brake: efficiency below requirements (3.7.B.7)
Nearside Front suspension has excessive play in a lower suspension ball joint (2.5.B.1a) DANGEROUS
Offside rear parking brake recording little or no effort (3.7.B.6a) DANGEROUS
Nearside Rear Brake hose has slight corrosion to ferrules (3.6.B.4e)
Nearside Rear Sub-frame attachment slightly corroded (2.4.G.1)
Nearside Rear Subframe mounting prescribed area is corroded but not considered excessive chassis (2.4.A.3)
Nearside Rear Subframe mounting prescribed area is corroded but not considered excessive inner sill (2.4.A.3)
Nearside Rear Subframe mounting prescribed area is corroded but not considered excessive outer sill (2.4.A.3)
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive chassis (2.4.A.3)
Offside Front constant velocity joint gaiter deteriorated, but preventing the ingress of dirt (2.5.C.1a)
Offside Front suspension ball joint dust cover deteriorated, but preventing the ingress of dirt (2.4.G.2)
Offside Rear Brake hose has slight corrosion to ferrules (3.6.B.4e)
Offside Rear Sub-frame attachment slightly corroded (2.4.G.1)
Offside Rear Subframe mounting prescribed area is corroded but not considered excessive inner sill (2.4.A.3)
Offside Rear Subframe mounting prescribed area is corroded but not considered excessive outer sill (2.4.A.3)
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive chassis (2.4.A.3)
Offside Rear Suspension spring mounting prescribed area is corroded but not considered excessive chassis (2.4.A.3)
Rear Sub-frame corroded but not seriously weakened (2.4.G.1)
Nearside Rear Brake hose has slight corrosion to ferrules (3.6.B.4e)
Nearside Rear Shock absorber has a slightly worn bush (2.7.4)
Nearside Rear Sub-frame attachment slightly corroded (2.4.G.1)
Nearside Rear Subframe mounting prescribed area is corroded but not considered excessive outer sill (2.4.A.3)
Offside Rear Brake hose has slight corrosion to ferrules (3.6.B.4e)
Offside Rear Shock absorber has a slightly worn bush (2.7.4)
Offside Rear Shock absorber has slight corrosion to the casing (2.7.2a)
Offside Rear Sub-frame attachment slightly corroded (2.4.G.1)
Offside Rear Suspension spring mounting prescribed area is corroded but not considered excessive chassis (2.4.A.3)
Rear Sub-frame corroded but not seriously weakened (2.4.G.1)
engine sump corroded and leaking oil
Offside rear parking brake recording little or no effort (3.7.B.6a)
Parking brake: efficiency below requirements (3.7.B.7)
Nearside Rear Brake hose has slight corrosion to ferrules (3.6.B.4e)
Nearside Rear Shock absorber has a slightly worn bush (2.7.4)
Nearside Rear Sub-frame attachment slightly corroded (2.4.G.1)
Nearside Rear Subframe mounting prescribed area is corroded but not considered excessive outer sill (2.4.A.3)
Offside Rear Brake hose has slight corrosion to ferrules (3.6.B.4e)
Offside Rear Shock absorber has a slightly worn bush (2.7.4)
Offside Rear Shock absorber has slight corrosion to the casing (2.7.2a)
Offside Rear Sub-frame attachment slightly corroded (2.4.G.1)
Offside Rear Suspension spring mounting prescribed area is corroded but not considered excessive chassis (2.4.A.3)
Rear Sub-frame corroded but not seriously weakened (2.4.G.1)
engine sump corroded and leaking oil
Offside Front Suspension arm has excessive play in a ball joint (2.4.G.2)
Offside Front Front constant velocity joint gaiter deteriorated, but preventing the ingress of dirt (2.5.C.1a)
Exhaust emits an excessive level of metered smoke for a turbo charged engine (7.4.B.3b)
Offside Front Front constant velocity joint gaiter deteriorated, but preventing the ingress of dirt (2.5.C.1a)
Nearside Front Lower Suspension arm ball joint dust cover deteriorated, but preventing the ingress of dirt (2.4.G.2)
fuel filter area slightly damp.
Offside Front Lower Suspension arm ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt (2.4.G.2)
Nail in nearside rear tyre
Nearside Front Lower Suspension arm ball joint dust cover deteriorated, but preventing the ingress of dirt (2.4.G.2)
fuel filter area slightly damp.
Rear Exhaust has a minor leak of exhaust gases (7.1.2)
Rear Exhaust has part of the system slightly deteriorated (7.1.1a)
Offside Front constant velocity joint gaiter split (2.5.C.1a)
Rear Exhaust has a minor leak of exhaust gases (7.1.2)
Rear Exhaust has part of the system slightly deteriorated (7.1.1a)
Rear Exhaust has part of the system slightly deteriorated (7.1.1a)
Nearside Headlamp aim beam image kick up to the offside (1.8)
Offside Headlamp aim beam image kick up to the offside (1.8)
How Reliable is the Fiat Idea?
Based on 60,263 MOT tests across 3,964 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
ST54 LNR is a 2004 Fiat Idea in Blue with a 1,248cc diesel engine. This vehicle has been through 20 MOT tests with a personal pass rate of 55%.
Across all 2004 Fiat Idea models, the average MOT pass rate is 71.1% with a typical mileage of 56,548 miles. This particular vehicle has a lower pass rate than the average for its year, which may indicate maintenance issues worth investigating.
The most common reason a Fiat Idea fails its MOT is tyre tread depth below requirements of 1.6mm, accounting for 3,425 recorded failures. If you're considering buying ST54 LNR, it's worth having these areas checked by a mechanic before committing.
The Fiat Idea typically stays on UK roads for around 22 years. At 22 years old, this Fiat Idea is approaching the upper end of the typical lifespan for this model.
Frequently Asked Questions
How do I check the history of ST54 LNR?
You can check the full history of ST54 LNR by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was ST54 LNR registered?
ST54 LNR is a 2004 Fiat Idea, first registered on 25 November 2004.
Is ST54 LNR safe to buy?
The MOT history for ST54 LNR shows 20 tests with a 55% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does ST54 LNR have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on ST54 LNR. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.