2005 Mini One

Nearside Rear Service brake binding but not excessively (1.2.1 (f))

Offside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))

corrosion

Nearside Rear Tyre tread depth below requirements of 1.6mm (5.2.3 (e)) DANGEROUS

Nearside Rear Service brake binding but not excessively (1.2.1 (f))

Offside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))

corrosion

Nearside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Oil leak, but not excessive (8.4.1 (a) (i))

Rear Tyre worn close to legal limit/worn on edge o/s and n/s (5.2.3 (e))

Sub-frame corroded but not seriously weakened Front and rear (5.3.3 (b) (i))

Suspension component corroded but not seriously weakened Front and rear (5.3.3 (b) (i))

Nearside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Nearside Rear Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))

Offside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Offside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Offside Rear Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))

Nearside Front Suspension arm rubber bush deteriorated resulting in excessive movement rear bush (2.4.G.2)

Offside Front Suspension arm rubber bush deteriorated resulting in excessive movement rear bush (2.4.G.2)

Offside Rear rear brake binding (3.7.B.1)

Nearside Front Tyre worn close to the legal limit (4.1.E.1)

front & rear brake discs worn

Exhaust noise is clearly in excess of that emitted by a similar vehicle fitted with a standard silencer in average condition (7.1.4)

Nearside Headlamp aim too low (1.8)

Offside Front wheel bearing rough when rotated (2.5.A.2)

Offside Headlamp aim too low (1.8)

Offside Rear Tyre has a bulge, caused by separation or partial failure of its structure 205/45/17 (4.1.D.1b)

Rear Exhaust has a major leak of exhaust gases (7.1.2)

Nearside Front Tyre worn close to the legal limit (4.1.E.1)

front & rear brake discs worn

Suspension arm rubber mounting deteriorated but not resulting in excessive movement (2.4.G.2)

uneven wear on o/s rear tyre

Exhaust system not adequately supported (7.1.1)

Nearside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Offside Front Headlamp aim too high (1.8)

Offside Front Lower Suspension arm ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt (2.4.G.2)

Suspension arm rubber mounting deteriorated but not resulting in excessive movement (2.4.G.2)

uneven wear on o/s rear tyre

Rear brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

Exhaust emissions Lambda reading after 2nd fast idle outside specified limits (7.3.D.3)

Offside Rear Brake pad(s) less than 1.5 mm thick (3.5.1g)

both front tyres feathered on edges

engine management light on

exhaust back box outer skin corroded to excess

Nearside Front Tyre worn close to the legal limit (4.1.E.1)

Offside Front Tyre worn close to the legal limit (4.1.E.1)

Rear Exhaust has part of the system slightly deteriorated (7.1.1a)