2006 Mazda B Series

under side poor and rusty

Front Bumper damaged and likely to cause injury when grazed or contacted (6.1.4 (a) (i))

Front Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced (6.1.1 (c) (i))

Nearside Front Anti-roll bar linkage insecurely attached (5.3.3 (a) (i))

Nearside Front Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced (6.1.1 (c) (i))

Offside Front Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced (6.1.1 (c) (i))

under side poor and rusty

Extensive surface corrosion on underside of vehicle

Nearside Front Vehicle structure inadequately repaired such that structural rigidity is significantly reduced Body mount (6.1.1 (d) (i))

Extensive surface corrosion on underside of vehicle

Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Brake pipe corroded, covered in grease or other material brake hose (1.1.11 (c))

Front Brake disc worn, but not excessively (1.1.14 (a) (i))

Front Headlamp has a product on the lens but not seriously reducing light output (4.1.4 (b))

Rear Service brake fluctuating, but not excessively (1.2.1 (e))

signs of welding to front cross member, aand patch work under body and bonnet, heavily undersealed

Front cross member / radiator support corroded

Headlamp lens slightly defective both (4.1.1 (b) (i))

Nearside Front Brake hose has slight corrosion to ferrule (1.1.12 (f) (i))

Nearside Front Inner wing corroded out with prescribed area

Nearside Front Service brake binding but not excessively (1.2.1 (f))

Nearside Front shockabsorber casing corroded

Offside Front Brake hose has slight corrosion to ferrule (1.1.12 (f) (i))

Offside Front Service brake binding but not excessively (1.2.1 (f))

Rear Fluid leak, but not excessive diff (8.4.1 (a) (i))

Service brake fluctuating, but not excessively both rear (1.2.1 (e))

Towbar slightly corroded within 30cm of towbar mounting chassis (6.1.6 (i) (i))

all suspension components heavily corroded

all welding repairs covered with thick underseal

Nearside Headlamp levelling device inoperative (4.1.5 (a))

Front cross member / radiator support corroded

Headlamp lens slightly defective both (4.1.1 (b) (i))

Nearside Front Brake hose has slight corrosion to ferrule (1.1.12 (f) (i))

Nearside Front Inner wing corroded out with prescribed area

Nearside Front Service brake binding but not excessively (1.2.1 (f))

Nearside Front shockabsorber casing corroded

Offside Front Brake hose has slight corrosion to ferrule (1.1.12 (f) (i))

Offside Front Service brake binding but not excessively (1.2.1 (f))

Rear Fluid leak, but not excessive diff (8.4.1 (a) (i))

Service brake fluctuating, but not excessively both rear (1.2.1 (e))

Towbar slightly corroded within 30cm of towbar mounting chassis (6.1.6 (i) (i))

all suspension components heavily corroded

all welding repairs covered with thick underseal

Exhaust system insecure front mount detached (6.1.2 (a))

Nearside Headlamp levelling device inoperative (4.1.5 (a))

Offside Front Shock absorbers has a serious fluid leak (5.3.2 (b))

Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis at nearside rear shocker mount (2 places) (5.3.6 (a) (i))

Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis at offside rear spring eye mount (5.3.6 (a) (i))

Brake hose has slight corrosion to ferrule both front (1.1.12 (f) (i))

Headlamp lens slightly defective both (4.1.1 (b) (i))

Service brake fluctuating, but not excessively both rear (1.2.1 (e))

Towbar slightly corroded within 30cm of towbar mounting chassis (6.1.6 (i) (i))

all body mounts corroded

all suspension components heavily corroded

front crossmember/radiator support corroded

nearside front inner wing corroded, out with prescribed areas

nearside front shocker corroded

Front Inner Anti-roll bar pin or bush worn but not resulting in excessive movement D both sides (5.3.4 (a) (i))

Headlamp has a product on the lens but not seriously reducing light output both (4.1.4 (b))

Nearside Towbar fractured not seriously affecting its strength with 30cm of a towbar mounting (6.1.6 (i) (i))

Offside Towbar fractured not seriously affecting its strength with 30cm of a towbar mounting (6.1.6 (i) (i))

Rear Service brake fluctuating, but not excessively both (1.2.1 (e))

all body to chassis mounting areas corroded

all suspension components showing heavy corrosion

front crossmember corroded radiator support

main chassis showing corrosion

poss timing belt due

Exhaust system insecure centre and rear (6.1.2 (a))

Nearside Windscreen wiper does not clear the windscreen effectively (3.4 (b) (ii))

Offside Rear fog lamp not working (4.5.1 (a) (ii))

Front Inner Anti-roll bar pin or bush worn but not resulting in excessive movement D both sides (5.3.4 (a) (i))

Headlamp has a product on the lens but not seriously reducing light output both (4.1.4 (b))

Nearside Towbar fractured not seriously affecting its strength with 30cm of a towbar mounting (6.1.6 (i) (i))

Offside Towbar fractured not seriously affecting its strength with 30cm of a towbar mounting (6.1.6 (i) (i))

Rear Service brake fluctuating, but not excessively both (1.2.1 (e))

all body to chassis mounting areas corroded

all suspension components showing heavy corrosion

front crossmember corroded radiator support

main chassis showing corrosion

poss timing belt due

Headlamp lens slightly defective both (4.1.1 (b) (i))

Service brake fluctuating, but not excessively both rear (1.2.1 (e))

Suspension component mounting prescribed area is corroded but not considered excessive chassis at rear (5.3.6 (a) (i))

front cross member corroded

underside of vehicle and suspension components heavily corroded

Brake hose excessively damaged rear ferrule (1.1.12 (b) (ii))

Exhaust emissions exceed manufacturer's specified limit (8.2.2.2 (a))

Headlamp lens slightly defective both (4.1.1 (b) (i))

Service brake fluctuating, but not excessively both rear (1.2.1 (e))

Suspension component mounting prescribed area is corroded but not considered excessive chassis at rear (5.3.6 (a) (i))

front cross member corroded

underside of vehicle and suspension components heavily corroded

Nearside Brake pipe excessively corroded front to rear (3.6.B.2c)

Nearside Rear Brake pipe excessively corroded (3.6.B.2c)

Offside Brake pipe excessively corroded front to rear (3.6.B.2c)

Offside Rear Brake pipe excessively corroded (3.6.B.2c)

Rear Brake pipe excessively corroded load sensing valve to flexi (3.6.B.2c)

Brake pipe slightly corroded all pipes (3.6.B.2c)

brake disc worn, pitted or scored, but not seriously weakened both front inner faces (3.5.1i)

Exhaust has a major leak of exhaust gases tail pipe (7.1.2)

Exhaust system not adequately supported tail pipe (7.1.1)

Rear Brake load sensing valve linkage seized (3.6.E.3)

Brake pipe slightly corroded all pipes (3.6.B.2c)

all exhaust supports badley corroded

brake disc worn, pitted or scored, but not seriously weakened both front inner faces (3.5.1i)

Brake pipe slightly corroded (3.6.B.2c)

Brake pipe slightly corroded (3.6.B.2c)

Brake pipe slightly corroded (3.6.B.2c)

brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

Exhaust system not adequately supported (7.1.1)

Brake pipe slightly corroded (3.6.B.2c)

Brake pipe slightly corroded (3.6.B.2c)

Brake pipe slightly corroded (3.6.B.2c)

brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

Centre Exhaust system not adequately supported (7.1.1)

Nearside Windscreen wiper does not clear the windscreen effectively (8.2.2)

Offside Windscreen wiper does not clear the windscreen effectively (8.2.2)

Centre Exhaust system not adequately supported (7.1.1)

Rear fog lamp not working (1.3.2b)

Brakes imbalanced across an axle (3.7.B.5b)

Centre Exhaust system not adequately supported (7.1.1) DANGEROUS

Front registration plate letter/figure incomplete (6.3.1c) DANGEROUS

Windscreen has a sticker or other obstruction encroaching into the swept area by more than 40mm outside zone 'A' (8.3.1e) DANGEROUS