2008 Toyota Aygo

Parking brake efficiency below requirements (1.4.2 (a) (i))

Front Brakes imbalanced across an axle (1.2.1 (b) (i))

Nearside Front Suspension arm ball joint excessively worn (5.3.4 (a) (i))

Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner arch (5.3.6 (a) (i))

Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner sill (5.3.6 (a) (i))

Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength outer sill (5.3.6 (a) (i))

Nearside Seat belt anchorage prescribed area strength or continuity significantly reduced inner sill (7.1.1 (a) (i))

Nearside Seat belt anchorage prescribed area strength or continuity significantly reduced outer sill (7.1.1 (a) (i))

Offside Front Suspension arm pin or bush excessively worn (5.3.4 (a) (i))

Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner arch (5.3.6 (a) (i))

Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength outer sill (5.3.6 (a) (i))

Offside Seat belt anchorage prescribed area strength or continuity significantly reduced inner sill (7.1.1 (a) (i))

All under body corroded

Front Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Nearside Front outer sill excessively corroded but not within prescribed area

Nearside Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Offside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Offside Front outer sill excessively corroded but not within prescribed area

Oil leak, but not excessive (8.4.1 (a) (i))

All underbody corroded

Front Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Nearside Front Suspension arm ball joint has slight play (5.3.4 (a) (i))

Offside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Oil leak, but not excessive (8.4.1 (a) (i))

Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner sill (5.3.6 (a) (i))

Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength outer sill (5.3.6 (a) (i))

Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner sill (5.3.6 (a) (i))

Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength outer sill (5.3.6 (a) (i))

Rear Brakes imbalanced across an axle (1.2.1 (b) (i))

All underbody corroded

Front Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Nearside Front Suspension arm ball joint has slight play (5.3.4 (a) (i))

Offside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Oil leak, but not excessive (8.4.1 (a) (i))

Front Sub-frame is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Nearside Inner Suspension component mounting prescribed area is corroded but not considered excessive Sill (5.3.6 (a) (i))

Offside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Offside Inner Suspension component mounting prescribed area is corroded but not considered excessive Sill (5.3.6 (a) (i))

Oil leak, but not excessive (8.4.1 (a) (i))

Nearside Front Suspension arm pin or bush excessively worn Wishbone rear bush bonding excessively deteriorated (5.3.4 (a) (i))

Offside Front Suspension arm pin or bush excessively worn Wishbone rear bush bonding excessively deteriorated (5.3.4 (a) (i))

Offside Outer Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Sill (Marked with chalk) (5.3.6 (a) (i))

Front Sub-frame is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Nearside Front Anti-roll bar linkage pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Nearside Inner Suspension component mounting prescribed area is corroded but not considered excessive Sill (5.3.6 (a) (i))

Offside Front Anti-roll bar linkage pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Offside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Offside Inner Suspension component mounting prescribed area is corroded but not considered excessive Sill (5.3.6 (a) (i))

Oil leak, but not excessive (8.4.1 (a) (i))

Nearside Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced outer sill (6.1.1 (c) (i))

Offside Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced outer sill (6.1.1 (c) (i))

Nearside Parking brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (1.4.2 (a) (i))

Nearside Rear brake back plate damp

Nearside Front Lower Suspension arm pin or bush excessively worn inner rear (5.3.4 (a) (i))

Nearside Front Road wheel fixing missing (5.2.1 (a) (i))

Nearside Front Suspension arm ball joint excessively worn (5.3.4 (a) (i))

Offside Front Position lamp not working (4.2.1 (a))

Offside Parking brake inoperative on one side (1.4.1 (a))

Offside Rear Brake pipe excessively corroded (1.1.11 (c))

Parking brake efficiency below requirements (1.4.2 (a) (i))

Nearside Rear brake back plate damp

Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive outer sill (2.4.A.3)

Offside Rear Brake pipe slightly corroded (3.6.B.2c)

Rear Exhaust has a minor leak of exhaust gases (7.1.2)

Front Sub-frame corroded but not seriously weakened (2.4.G.1)

Windscreen has damage to an area less than a 40mm circle outside zone 'A' (8.3.1d)

Anti-lock braking system warning lamp indicates an ABS fault (3.4.1c)

Nearside Front Lower Suspension arm has excessive play in a ball joint (2.4.G.2)

Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Nearside Rear Brake pipe excessively corroded axle (3.6.B.2c)

Nearside Rear Brake pipe excessively corroded main (3.6.B.2c)

Nearside Registration plate lamp not working (1.1.C.1d)

Offside Front Lower Suspension arm has excessive play in a ball joint (2.4.G.2)

Front Sub-frame corroded but not seriously weakened (2.4.G.1)

Windscreen has damage to an area less than a 40mm circle outside zone 'A' (8.3.1d)

Nearside Front Tyre worn close to the legal limit (4.1.E.1)

Offside Front Tyre worn close to the legal limit (4.1.E.1)

Sub-frame repaired, but not inappropriately (2.4.A.2)

Windscreen has damage to an area less than a 40mm circle outside zone 'A' (8.3.1d)

Nearside Front position lamp(s) not working (1.1.A.3b)

Offside Front Lower Suspension arm rubber bush bonding deteriorated resulting in excessive movement rearmost (2.4.G.2)

Nearside Front Lower Suspension arm rubber bush deteriorated but not resulting in excessive movement rearmost (2.4.G.2)

Nearside Front Tyre worn close to the legal limit (4.1.E.1)

Nearside Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

Offside Front Tyre worn close to the legal limit (4.1.E.1)

Offside Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

Windscreen has damage to an area less than a 40mm circle outside zone 'A' (8.3.1d)

Offside Brake pipe excessively corroded main (3.6.B.2c)

Offside Rear Tyre worn close to the legal limit (4.1.E.1)

Offside Front Lower Suspension arm has slight play in a ball joint (2.4.G.2)

offside rear tyre has cut in sidewall cords not exposed

Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Offside Headlamp aim beam image obviously incorrect (1.8.A.1b)

Offside Rear Tyre has a tear, caused by separation or partial failure of its structure (4.1.D.1b)

Offside Front Lower Suspension arm has slight play in a ball joint (2.4.G.2)

nearside front tyre has a cut in sidewall

advise both rear tyres cracking on tread

Nearside Front Headlamp not working on dipped beam (1.7.5a)

Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Windscreen washer provides insufficient washer liquid (8.2.3)

advise both rear tyres cracking on tread

Offside Front Suspension arm rubber bush deteriorated resulting in excessive movement (2.4.G.2)

water pump noisy and worn