MOT Status
ValidMileage
113,028 miSignificantly above average — investigate
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Exhaust has a minor leak of exhaust gases (6.1.2 (a))
Front Brake pad(s) wearing thin (1.1.13 (a) (ii))
Front Subframe mounting repair covered in underseal (5.3.6 (a) (i))
Nearside Front Suspension component mounting repair covered in underseal (5.3.6 (a) (i))
Nearside Rear Shock absorbers has slight external damage to the casing (5.3.2 (b))
Offside Front Subframe mounting repair covered in underseal (5.3.6 (a) (i))
Exhaust emissions likely to be affected by an exhaust leak (8.2.1.1 (b))
Exhaust has a major leak of exhaust gases (6.1.2 (a))
Nearside Rear Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced (6.1.1 (c) (i))
Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Floor (5.3.6 (a) (i))
Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Sill (5.3.6 (a) (i))
Offside Rear Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced (6.1.1 (c) (i))
Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Floor (5.3.6 (a) (i))
Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Inner sill (5.3.6 (a) (i))
Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Outer sill (5.3.6 (a) (i))
Front Brake pad(s) wearing thin Both (1.1.13 (a) (ii))
Front Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))
Nearside Front Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Nearside Rear Shock absorbers has slight external damage to the casing (5.3.2 (b))
Offside Front Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Offside Rear Shock absorbers has a reduced damping effect (5.3.2 (d))
Rear Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))
Nearside Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Offside Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Brake lever has insufficient reserve travel (1.1.2 (a))
Nearside Front Service brake excessively fluctuating (1.2.1 (e))
Nearside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill (5.3.6 (a) (i))
Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill (5.3.6 (a) (i))
Nearside Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Offside Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Offside Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))
Front Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))
Nearside Front Road wheel slightly distorted (5.2.2 (c) (i))
Nearside Rear Tyre worn close to legal limit/worn on edge 2.5mm (5.2.3 (e))
Offside Brake pipe corroded, covered in grease or other material front to rear (1.1.11 (c))
Nearside Rear Service brake excessively binding (1.2.1 (f))
Offside Front Seat belt anchorage prescribed area strength or continuity significantly reduced sill corroded and holed (7.1.1 (a) (i))
Offside Rear Service brake excessively binding (1.2.1 (f))
Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength axle mounting (5.3.6 (a) (i))
Front Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))
Nearside Front Road wheel slightly distorted (5.2.2 (c) (i))
Nearside Rear Tyre worn close to legal limit/worn on edge 2.5mm (5.2.3 (e))
Offside Brake pipe corroded, covered in grease or other material front to rear (1.1.11 (c))
Nearside Front Service brake excessively fluctuating (1.2.1 (e))
Nearside Stop lamp(s) not working (4.3.1 (a) (ii))
Offside Rear Outer Seat belt anchorage prescribed area strength or continuity significantly reduced sill (7.1.1 (a) (i))
Parking brake efficiency below requirements (1.4.2 (a) (i))
Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))
Nearside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Nearside Rear Service brake binding but not excessively (1.2.1 (f))
Offside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Offside Rear Service brake binding but not excessively (1.2.1 (f))
Nearside Rear Brake hose ferrule excessively corroded (1.1.12 (f) (i))
Nearside Rear Suspension component attachment bracket/mounting corroded and seriously weakened axle mount (5.3.3 (b) (i))
Offside Front Position lamp not working (4.2.1 (a) (ii))
Offside Rear Brake hose ferrule excessively corroded (1.1.12 (f) (i))
Offside Rear Suspension component attachment bracket/mounting corroded and seriously weakened axle mount (5.3.3 (b) (i))
Offside Suspension component mounting prescribed area excessively corroded significantly reducing structural strength outer sill (5.3.6 (a) (i))
Nearside Rear Service brake binding but not excessively (1.2.1 (f))
Offside Rear Service brake binding but not excessively (1.2.1 (f))
Nearside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Nearside Rear Brake pipe excessively corroded (1.1.11 (c))
Offside Rear Brake pipe excessively corroded (1.1.11 (c))
Central Exhaust mounting defective (6.1.2 (a))
Central Rear Exhaust has a minor leak of exhaust gases At the exhaust joint (6.1.2 (a))
Nearside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Nearside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Offside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Offside Front Position lamp not working (4.2.1 (a))
Nearside Suspension arm rubber bush deteriorated but not resulting in excessive movement Wishbone rear bush. (2.4.G.2)
Offside Rear Tyre has slight cracking.
Offside Front Brake pipe excessively corroded (3.6.B.2c)
Nearside Suspension arm rubber bush deteriorated but not resulting in excessive movement Wishbone rear bush. (2.4.G.2)
Offside Rear Tyre has slight cracking.
Nearside Brake pipe slightly corroded front to rear (3.6.B.2c)
Offside Front Brake pipe slightly corroded (3.6.B.2c)
Nearside Brake pipe slightly corroded front to rear, at rear (3.6.B.2c)
Tyre worn close to the legal limit both front (4.1.E.1)
Offside Brake pipe excessively corroded front to rear, at rear (3.6.B.2c)
Rear Exhaust system not adequately supported (7.1.1)
Nearside Brake pipe slightly corroded front to rear, at rear (3.6.B.2c)
Tyre worn close to the legal limit both front (4.1.E.1)
Brake pipe slightly corroded (3.6.B.2c)
Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)
both rear tyres cracking
Front Windscreen wiper does not clear the windscreen effectively (8.2.2)
How Reliable is the Peugeot 107?
Based on 2,229,410 MOT tests across 139,779 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
ST59 BWC is a 2009 Peugeot 107 in Grey with a 998cc petrol engine. This vehicle has been through 24 MOT tests with a personal pass rate of 58.3%.
Across all 2009 Peugeot 107 models, the average MOT pass rate is 76.0% with a typical mileage of 50,720 miles. This particular vehicle has a lower pass rate than the average for its year, which may indicate maintenance issues worth investigating.
The most common reason a Peugeot 107 fails its MOT is tyre tread depth below requirements of 1.6mm, accounting for 42,280 recorded failures. If you're considering buying ST59 BWC, it's worth having these areas checked by a mechanic before committing.
The Peugeot 107 typically stays on UK roads for around 21 years. At 17 years old, this Peugeot 107 is approaching the upper end of the typical lifespan for this model.
Frequently Asked Questions
How do I check the history of ST59 BWC?
You can check the full history of ST59 BWC by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was ST59 BWC registered?
ST59 BWC is a 2009 Peugeot 107, first registered on 29 October 2009.
Is ST59 BWC safe to buy?
The MOT history for ST59 BWC shows 24 tests with a 58.3% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does ST59 BWC have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on ST59 BWC. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.