2010 Subaru Forester

Brake pedal anti-slip provision missing (1.1.2 (c))

Exhaust emissions exceed manufacturer's specified limit (8.2.2.2 (a))

Nearside Front Position lamp not working (4.2.1 (a) (ii))

Nearside Rear Anti-roll bar pin or bush excessively worn (5.3.4 (a) (i))

Nearside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill (5.3.6 (a) (i))

Nearside Rear Sub-frame corroded and seriously weakened (5.3.3 (b) (i))

Offside Rear Anti-roll bar pin or bush excessively worn (5.3.4 (a) (i))

Offside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill (5.3.6 (a) (i))

Offside Rear Sub-frame corroded and seriously weakened (5.3.3 (b) (i))

Nearside Front Outer Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Nearside Front Service brake fluctuating, but not excessively (1.2.1 (e))

Nearside Front Anti-roll bar pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Nearside Rear Anti-roll bar pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Offside Front Anti-roll bar pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Offside Rear Anti-roll bar pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Exhaust has a major leak of exhaust gases FULL SYSTEM (6.1.2 (a))

Offside Front Tyre tread depth below requirements of 1.6mm 225/55/17 (5.2.3 (e)) DANGEROUS

FAN BELT TENSIOR BEARING COLLAPSED

Nearside Front Anti-roll bar pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Nearside Rear Anti-roll bar pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Offside Front Anti-roll bar pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Offside Rear Anti-roll bar pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Central Rear Subframe mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Nearside Front Outer Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Offside Front Outer Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Nearside Rear Inner Brake disc significantly and obviously worn (1.1.14 (a) (i))

Offside Rear Inner Brake disc significantly and obviously worn (1.1.14 (a) (i))

Parking brake efficiency less than 50% of the required value (1.4.2 (a) (ii)) DANGEROUS

Central Rear Subframe mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Nearside Front Outer Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Offside Front Outer Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Nearside Rear Anti-roll bar linkage ball joint has slight play (5.3.4 (a) (i))

Offside Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Offside Track rod end ball joint has slight play (2.1.3 (b) (i))

Electronic stability control warning lamp indicates a fault (7.12 (e))

Emissions not tested Due to exhaust leak (8.2.2.2 (e))

Engine MIL inoperative or indicates a malfunction (8.2.2.2 (g))

Nearside Front Position lamp not working (4.2.1 (a) (ii))

Nearside Front Upper Macpherson strut top bush or bearing has excessive wear or free play (5.3.4 (a) (i))

Nearside Headlamp not working on main beam (4.1.1 (a) (ii))

Nearside Rear Brake pipe excessively corroded Main front to rear at rear connection to flexi hose (1.1.11 (c))

Nearside Rear Exhaust has a major leak of exhaust gases Rear silencer to middle joint corroded and snapped off . (6.1.2 (a))

Offside Headlamp not working on main beam (4.1.1 (a) (ii))

Offside Rear Exhaust has a major leak of exhaust gases Rear silencer to middle joint corroded and holed (6.1.2 (a))

Nearside Rear Anti-roll bar linkage ball joint has slight play (5.3.4 (a) (i))

Offside Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Offside Track rod end ball joint has slight play (2.1.3 (b) (i))

Anti-roll bar pin or bush worn but not resulting in excessive movement both rear antiroll bar D bushes (5.3.4 (a) (i))

Brake pipe corroded, covered in grease or other material both rear pipes to ferrules (1.1.11 (c))

Front Brake disc worn, pitted or scored, but not seriously weakened o/s/f inner disc face (1.1.14 (a) (ii))

Nearside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Offside Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Nearside Front Position lamp not working (4.2.1 (a))

Nearside Front Windscreen washer provides insufficient washer liquid (3.5 (a))

Anti-roll bar ball joint has slight play O/S/F & N/S/F (5.3.4 (a) (i))

Nearside Front Lower Suspension arm pin or bush excessively worn (5.3.4 (a) (i))

Offside Front Lower Suspension arm pin or bush excessively worn (5.3.4 (a) (i))

Nearside Front Tyre tread depth below requirements of 1.6mm (5.2.3 (e)) DANGEROUS

Nearside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Offside Front Lower Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Nearside Front Tyre worn close to the legal limit (4.1.E.1)

Nearside Front suspension has slight movement at a wishbone pin or bush (2.5.A.1c)

Nearside Rear Anti-roll bar has slight play in a pin/bush (2.4.G.2)

Offside Front suspension has slight movement at a wishbone pin or bush (2.5.A.1c)

Offside Rear Anti-roll bar has slight play in a pin/bush (2.4.G.2)

Nearside Front Anti-roll bar linkage has slight play in a ball joint (2.4.G.2)

Nearside Rear brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

Offside Front Anti-roll bar linkage has slight play in a ball joint (2.4.G.2)

Rear Brake pad(s) wearing thin (3.5.1g)

Front Brake pad(s) wearing thin (3.5.1g)

Nearside Front Anti-roll bar linkage has excessive play in a ball joint (2.4.G.2)

Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1) DANGEROUS

Front Brake pad(s) wearing thin (3.5.1g)

Engine covers fitted obscuring some components in the engine bay

Under-trays fitted obscuring some underside components