2008 Honda Cr-v

Nearside Front Tyre worn close to legal limit/worn on edge on limit 1.6mm (5.2.3 (e))

Offside Front Tyre worn close to legal limit/worn on edge 2mm (5.2.3 (e))

Nearside Rear Stop lamp(s) not working (4.3.1 (a) (ii))

Offside Front Headlamp light intensity severely reduced (4.1.4 (a))

Nearside Rear Tyre tread depth below requirements of 1.6mm (5.2.3 (e)) DANGEROUS

Nearside Front Tyre worn close to legal limit/worn on edge on limit 1.6mm (5.2.3 (e))

Offside Front Tyre worn close to legal limit/worn on edge 2mm (5.2.3 (e))

Engine mounting damaged but not to excess lower mounting slight play (6.1.8 (a) (i))

Front Sub-frame is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Nearside Rear Anti-roll bar linkage ball joint dust cover severely deteriorated (5.3.4 (b) (i))

Nearside Rear Upper Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Offside Rear Anti-roll bar linkage ball joint dust cover severely deteriorated (5.3.4 (b) (i))

Rear Sub-frame is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Rear Vehicle structure or chassis corroded within 30cm of a mounting, but not seriously affecting overall security (6.2.2 (d) (i))

Towbar component corroded, but not excessively whole towbar (6.1.6 (a))

Central Exhaust system insecure (6.1.2 (a))

Offside Front Track rod end ball joint dust cover excessively damaged or deteriorated so that it no longer prevents the ingress of dirt (2.1.3 (g) (ii))

Engine mounting damaged but not to excess lower mounting slight play (6.1.8 (a) (i))

Front Sub-frame is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Nearside Rear Anti-roll bar linkage ball joint dust cover severely deteriorated (5.3.4 (b) (i))

Nearside Rear Upper Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Offside Rear Anti-roll bar linkage ball joint dust cover severely deteriorated (5.3.4 (b) (i))

Rear Sub-frame is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Rear Vehicle structure or chassis corroded within 30cm of a mounting, but not seriously affecting overall security (6.2.2 (d) (i))

Towbar component corroded, but not excessively whole towbar (6.1.6 (a))

Rear Exhaust has a minor leak of exhaust gases flange rusty (6.1.2 (a))

Rear Exhaust has a minor leak of exhaust gases (6.1.2 (a))

Offside washer low output

Rear Exhaust silencer slightly loose flange very rusty (8.1.1 (b) (i))

Rear Registration plate deteriorated but not likely to be misread (0.1 (b))

Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Rear tow bar very rusty

exhaust rear box flange very rusty

exhaust centre to rear joint very corroded but secure at present

Centre exhaust corroded.

Nearside Rear Shock absorber has slight corrosion to the casing (2.7.2a)

Nearside Rear Side repeater slightly discoloured (1.4.A.2f)

Offside Rear Shock absorber has slight corrosion to the casing (2.7.2a)

Offside Rear Side repeater slightly discoloured (1.4.A.2f)

Nearside Rear Direction indicator slightly discoloured (1.4.A.2f)

Offside Rear Direction indicator slightly discoloured (1.4.A.2f)

Offside Rear Shock absorber has slight corrosion to the casing (2.7.2a)

Power Assisted Steering cooling pipe corroded.

Engine covers fitted obscuring some components in the engine bay

Under-trays fitted obscuring some underside components

Engine covers fitted obscuring some components in the engine bay

Under-trays fitted obscuring some underside components

Front Brake pad(s) wearing thin (3.5.1g)

Rear Brake pad(s) wearing thin (3.5.1g)