1993 Jaguar Xjs

Nearside Rear Tie bar/rod corroded but not seriously weakened (2.4.G.1)

Offside Rear Tie bar/rod corroded but not seriously weakened (2.4.G.1)

Power steering pipe(s) or hose(s) slightly corroded (2.3.2)

Windscreen has damage to an area less than a 40mm circle outside zone 'A' (8.3.1d)

front shocker bushes used ones fitted

o/s and n/s rear inner quarter panals corroded

welding repairs at the rear floor areas heavly sealed

Battery insecure (1.9.1)

Nearside Front Shock absorber has an excessively worn bush (2.7.4)

Nearside Front Side repeater has a product on the lens so it is not visible from a reasonable distance (1.4.A.2e)

Nearside Front Wheel nut(s) loose (4.2.A.1e)

Nearside Stop lamp not working (1.2.1b)

Offside Front Shock absorber has an excessively worn bush (2.7.4)

Offside Front Windscreen washer provides insufficient washer liquid (8.2.3)

Offside Stop lamp not working (1.2.1b)

Vehicle structure has an unsatisfactory modification, seriously affecting its strength within 30cm of the body mountings front crossmember (6.1.B.2)

Nearside Rear Tie bar/rod corroded but not seriously weakened (2.4.G.1)

Offside Rear Tie bar/rod corroded but not seriously weakened (2.4.G.1)

Power steering pipe(s) or hose(s) slightly corroded (2.3.2)

Windscreen has damage to an area less than a 40mm circle outside zone 'A' (8.3.1d)

o/s and n/s rear inner quarter panals corroded

welding repairs at the rear floor areas heavly sealed

Nearside Front Seat belt anchorage prescribed area is excessively corroded floor (5.2.6)

Nearside Front Tyre has a cut in excess of the requirements deep enough to reach the ply or cords (4.1.D.1a)

Nearside Front Windscreen wiper does not clear the windscreen effectively (8.2.2)

Nearside Rear Suspension component mounting prescribed area is excessively corroded chasis (2.4.A.3)

Nearside Rear Suspension component mounting prescribed area is excessively corroded inner wheel arch (2.4.A.3)

Nearside Rear Suspension component mounting prescribed area is excessively corroded sills to floor (2.4.A.3)

Nearside Rear Tyre has a cut in excess of the requirements deep enough to reach the ply or cords (4.1.D.1a)

Nearside Seat belt anchorage prescribed area is excessively corroded under seat (5.2.6)

Offside Front Anti-roll bar linkage rubber mounting deteriorated resulting in excessive movement (2.4.G.2)

Offside Front Tyre has a cut in excess of the requirements deep enough to reach the ply or cords (4.1.D.1a)

Offside Rear Suspension component mounting prescribed area is excessively corroded inner wheel arch (2.4.A.3)

Offside Rear Suspension component mounting prescribed area is excessively corroded sills to floor (2.4.A.3)

Offside Rear Tyre has a cut in excess of the requirements deep enough to reach the ply or cords (4.1.D.1a)

Offside Seat belt anchorage prescribed area is excessively corroded floor (5.2.6)

Offside Seat belt anchorage prescribed area is excessively corroded under seat (5.2.6)

Windscreen has damage to an area in excess of a 10mm circle within zone 'A' (8.3.1a)

Nearside Front wheel bearing has excessive play (2.5.A.3c)

Offside Headlamp not working on main beam (1.7.5a)

Offside rear brakes release unevenly (3.7.B.4)

Parking brake: efficiency below requirements (3.7.B.7)

Rear position lamp(s) excessively deteriorated so that it is not visible from a reasonable distance (1.1.A.3d)

Windscreen washer provides insufficient washer liquid (8.2.3)

rear brake application uneven (3.7.B.2)

rear brake binding (3.7.B.1)

Windscreen has damage to an area less than a 40mm circle outside zone 'A' (8.3.1d)

Nearside Rear rear brake binding (3.7.B.1)

Offside Front Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Offside Rear rear brake binding (3.7.B.1)

Windscreen has damage to an area less than a 40mm circle outside zone 'A' (8.3.1d)