2002 Honda FJS600

Exhaust mounting does not fully support the exhaust system (7.1.1.c)

Fairing so located that it is likely to impede the steering (2.1.2e)

Front Brake pad(s) (sintered type) less than 1.0mm thick (3.2A1f(ii))

Rear Brake pad(s) (sintered type) less than 1.0mm thick (3.2A1f(ii))

Rear Tyre tread not clearly visible (4.1.3(i))

Stop lamp affected by the operation of another lamp (1.3.2)

Front Tyre worn close to the legal limit (4.1.3(ii))

Front Hydraulic brake control feels spongy (3.1.4a)

Roller brake test The less effective brake control does not achieve an efficiency of 25%. (3.3.A2b)

Front Tyre worn close to the legal limit (4.1.3(ii))

Front Brake disc(s) excessively worn (3.2.A1l)

Rear Brake disc(s) excessively scored (3.2.A1l)

Rear Brake lever has inadequate reserve travel (3.1.3b)

Rear Tyre tread depth is below minimum requirements of 1.0mm (4.1.3(ii))

Rear Locking devices not correctly fitted which may make the motor bicycle dangerous to ride (6.2.1h) DANGEROUS

Roller brake test The less effective brake control does not achieve an efficiency of 25%. (3.3.A2b) DANGEROUS

Front Brake pad(s) close to minimum limit (3.2.A1f(i))

Rear Brake pad(s) close to minimum limit (3.2.A1f(i))

Front Tyre tread depth is below minimum requirements of 1.0mm (4.1.3(ii))

Front wheel bearings are slightly rough (2.3.5b)

rear brake binding slightly

Rear Tyre tread depth is below minimum requirements of 1.0mm (4.1.3(ii))

Wheel alignment incorrect which adversely affects the handling (2.5.1)

Front Front wheel bearings have slight free play (2.3.5b)

Rear Brake pad(s) close to minimum limit (3.2.A1f(i))

Front Tyre worn close to the legal limit (4.1.3(ii))