2002 Seat Inca

Offside Front Service brake excessively binding (1.2.1 (f))

Nearside Front chassis box section/outrigger holed but not regarded as a structural point

Nearside Rear Suspension spring mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Nearside Rear Suspension spring mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Nearside Seat belt anchorage prescribed area is corroded but not considered excessive inner sill (5.2.6)

Offside Front Obligatory mirror damaged, but not seriously affecting the rear view (8.1.2a)

Offside Rear Suspension spring mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Offside Seat belt anchorage prescribed area is corroded but not considered excessive inner sill (5.2.6)

both rear tyres worn on outer edges

Nearside Front Lower Suspension arm rubber bush deteriorated resulting in excessive movement (2.4.G.2)

Nearside Inner Front constant velocity joint gaiter deteriorated to the extent that it no longer prevents the ingress of dirt etc (2.5.C.1a)

Nearside Seat belt anchorage prescribed area is excessively corroded outer sill at centre (5.2.6)

Nearside Stop lamp not working (1.2.1b)

Offside Headlamp not working on dipped beam (1.7.5a)

Offside Outer Front constant velocity joint gaiter deteriorated to the extent that it no longer prevents the ingress of dirt etc (2.5.C.1a)

Offside Registration plate lamp not working (1.1.C.1d)

Parking brake lever has no reserve travel (3.1.6b)

Rear Brake load sensing valve linkage seized (3.6.E.3)

Nearside Front chassis box section/outrigger holed but not regarded as a structural point

Nearside Rear Suspension spring mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Nearside Rear Suspension spring mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Nearside Seat belt anchorage prescribed area is corroded but not considered excessive inner sill (5.2.6)

Offside Front Lower Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Offside Front Obligatory mirror damaged, but not seriously affecting the rear view (8.1.2a)

Offside Rear Suspension spring mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Offside Seat belt anchorage prescribed area is corroded but not considered excessive inner sill (5.2.6)

both rear tyres worn on outer edges

Nearside Front Inner Front constant velocity joint gaiter deteriorated, but preventing the ingress of dirt (2.5.C.1a)

brake pedal has slight travel/pedal slightly soft but brake readings satisfactory

centre exhaust sleeve corroded

slight bind detected at offside front brake

Horn not working (1.6.2a)

Nearside Front wheel bearing rough when rotated (2.5.A.2)

Nearside Rear Suspension spring mounting prescribed area is excessively corroded inner sill (2.4.A.3)

Nearside Rear Suspension spring mounting prescribed area is excessively corroded outer sill (2.4.A.3)

Nearside Seat belt anchorage prescribed area is excessively corroded inner sill to floor at centre (5.2.6)

Nearside Seat belt anchorage prescribed area is excessively corroded outer sill at centre (5.2.6)

Offside Front coil spring broken (2.4.C.1a)

Exhaust has a minor leak of exhaust gases at centre to rear joint (7.1.2)

Nearside Front Inner Front constant velocity joint gaiter deteriorated, but preventing the ingress of dirt (2.5.C.1a)

Parking brake lever has little reserve travel (3.1.6b)

brake pedal has slight travel/pedal slightly soft but brake readings satisfactory

centre exhaust sleeve corroded

slight bind detected at offside front brake

Rear back box corroded

Nearside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Offside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Centre Exhaust has a minor leak of exhaust gases (7.1.2)

Nearside Front Suspension arm has excessive play in a ball joint (2.4.G.2)

Centre Exhaust has a minor leak of exhaust gases (7.1.2)

Nearside Front Lower Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Nearside Front Road wheel with a slightly distorted bead rim (4.2.A.1a)

Nearside Rear Shock absorber has slight corrosion to the casing (2.7.2a)

Nearside Seat belt anchorage prescribed area is corroded but not considered excessive (5.2.6)

Offside Rear Shock absorber has slight corrosion to the casing (2.7.2a)

Brakes imbalanced across an axle (3.7.B.5b)

Nearside Headlamp aim too high (1.8)

Offside Front Brake hose bulging under pressure (3.6.B.3)

Offside Front Lower Suspension arm rubber bush deteriorated resulting in excessive movement (2.4.G.2)

Offside front brake binding (3.7.B.1)

Nearside Front Lower Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Nearside Front Road wheel with a slightly distorted bead rim (4.2.A.1a)

Nearside Rear Shock absorber has slight corrosion to the casing (2.7.2a)

Nearside Seat belt anchorage prescribed area is corroded but not considered excessive (5.2.6)

Nearside front brake juddering slightly (3.7.A.2b)

Offside Rear Shock absorber has slight corrosion to the casing (2.7.2a)

Nearside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Offside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Offside Front Tyre worn close to the legal limit (4.1.E.1)

some movement at suspension strut top mountings when jacked up

Brakes imbalanced across an axle (3.7.B.5b)

Nearside Front Brake hose bulging under pressure (3.6.B.3)

Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Nearside Registration plate lamp not working (1.1.C.1d)

Front Brake pad(s) wearing thin (3.5.1g)

Nearside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Offside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Offside Front Tyre worn close to the legal limit (4.1.E.1)

Parking brake: parking brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.7)

offside front brake disc corroded on edges of inner face

some movement at suspension strut top mountings when jacked up

Nearside Brake pipe excessively corroded (3.6.B.2c)

Nearside Front Brake pipe excessively corroded (3.6.B.2c)

Nearside Front constant velocity joint gaiter split (2.5.C.1a)

Nearside Rear Brake pipe excessively corroded (3.6.B.2c)

Offside Brake pipe excessively corroded (3.6.B.2c)

Offside Rear Brake pipe excessively corroded (3.6.B.2c)

Brake pipe excessively corroded (3.6.B.2c)

Front Exhaust has part of the system excessively deteriorated (7.1.1a)

Front Exhaust system not adequately supported (7.1.1)

Nearside Brake pipe excessively corroded (3.6.B.2c)

Nearside Rear Braking system leaking (3.6.A.1)

Nearside Stop lamp not working (1.2.1b)

Nearside rear brake recording little or no effort (3.7.B.5a)

Nearside rear parking brake recording little or no effort (3.7.B.6a)

Offside Brake pipe excessively corroded (3.6.B.2c)

Offside Front Brake pipe excessively corroded (3.6.B.2c)

Offside Obligatory mirror seriously damaged, affecting the rear view (8.1.2a)

Parking brake: efficiency below requirements (3.7.B.7)

Nearside Rear Tyre worn close to the legal limit (4.1.E.1)

Nearside Registration plate lamp not working (1.1.5c)

Rear Brake valve leaking (3.6.A.1) DANGEROUS

Brakes imbalanced across an axle (3.7.B.5b)

Nearside Front Macpherson strut has excessive movement in the upper support bearing assembly (2.5.B.1b)

Nearside front brake binding (3.7.B.1)

Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Offside Rear Macpherson strut has excessive movement in the upper support bearing assembly (2.5.B.1b)