2002 Seat Inca

Front Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Nearside Rear Tyre has a cut but not deep enough to reach the ply or cords Outer side wall (5.2.3 (d) (i))

Steering box has slight free play detected at steering wheel (2.3 (a) (i))

Front Brake pad(s) wearing thin (1.1.13 (a) (ii))

Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Front Brake pad(s) wearing thin (1.1.13 (a) (ii))

Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Windscreen washer provides insufficient washer liquid (3.5 (a))

Exhaust emissions exceed manufacturer's specified limit (8.2.2.2 (a))

Nearside Front Steering rack gaiter missing or no longer prevents the ingress of dirt (2.1.3 (g) (ii))

Offside Seat belt anchorage prescribed area strength or continuity significantly reduced floor marked (7.1.1 (a) (i))

Parking brake efficiency below requirements (1.4.2 (a) (i))

Undertray likely to become detached (6.2.1 (a) (ii)) DANGEROUS

Nearside Front Tyre worn close to the legal limit (4.1.E.1)

Nearside Front Front position lamp(s) not working (1.1.A.3b)

Nearside Headlamp aim too low (1.8)

Offside Front Steering rack gaiter split (2.2.D.2d)

Nearside Front Tyre worn close to the legal limit (4.1.E.1)

Nearside Front Direction indicators not working (1.4.A.2c)

Nearside Front Subframe mounting prescribed area is excessively corroded floor (2.4.A.3)

Nearside Stop lamp not working (1.2.1b)

Offside Front Subframe mounting prescribed area is excessively corroded floor (2.4.A.3)

Power steering pipe(s) or hose(s) has slight seepage (2.3.3b)

Nearside Front Suspension component mounting prescribed area is excessively corroded sill holed (2.4.A.3)

Offside Rear Suspension component mounting prescribed area is excessively corroded outer =inner sills holed (2.4.A.3)

Power steering pipe(s) or hose(s) has slight seepage (2.3.3b)

Nearside Registration plate lamp not illuminating the registration plate (1.1.C.1e)

Offside Driver's seat fore and aft adjustment mechanism not functioning as intended. (6.2.A.3)

Offside Headlamp aim too low (1.8)

Offside Registration plate lamp not illuminating the registration plate (1.1.C.1e)

Nearside Rear Tyre(s) incorrect because different size tyres are fitted on the same axle. (4.1.A.1a)

Nearside front brake binding (3.7.B.1)

Offside Front Steering rack gaiter split (2.2.D.2d)

Offside Front Suspension arm has excessive play in a ball joint (2.4.G.2)

front brake application uneven (3.7.B.2)

Tyre worn close to the legal limit (4.1.E.1)

front exhaust bracket broken but system still secure

spare wheel slightly insecure

Exhaust emits an excessive level of metered smoke for a non-turbo charged engine (7.4.B.3b)

Nearside Front Direction indicator not working (1.4.A.2c)

Nearside Front Headlamp aim too high (1.8)

Offside Front Anti-roll bar has excessive play in a pin/bush (2.4.G.2)

Offside Front Brake hose bulging under pressure (3.6.B.3)

Registration plate lamp not illuminating the registration plate (1.1.C.1e)

Tyre worn close to the legal limit (4.1.E.1)

front exhaust bracket broken but system still secure

spare wheel slightly insecure

rear reg plate cracked

slight roughness osr wheel bearing

tailgate lower latch not locking

various brake pipes corroded

Nearside Rear Road wheel bead rim badly distorted (4.2.A.1a)

Nearside Rear Tyre has a cut in excess of the requirements deep enough to reach the ply or cords (4.1.D.1a)

rear reg plate cracked

slight roughness osr wheel bearing

tailgate lower latch not locking

various brake pipes corroded

Front Exhaust has a minor leak of exhaust gases (7.1.2)

Nearside Front Macpherson strut has slight movement in the upper support bearing assembly (2.5.B.1b)

Nearside Front Suspension arm has excessive play in a ball joint (2.4.G.2)

Nearside Front constant velocity joint gaiter split (2.5.C.1a)

Nearside Registration plate lamp not working (1.1.C.1d)

Parking brake: efficiency below requirements (3.7.B.7)

Front Exhaust has a minor leak of exhaust gases (7.1.2)

Nearside Front Macpherson strut has slight movement in the upper support bearing assembly (2.5.B.1b)

Nearside Front Macpherson strut has slight movement at the upper attachment (2.5.A.1c)

Nearside Front Brake hose bulging under pressure (3.6.B.3)

Nearside Front Brake pipe excessively corroded (3.6.B.2c)

Offside Front Brake pipe excessively corroded (3.6.B.2c)

Offside Front coil spring fractured (2.4.C.1a)

Offside Registration plate lamp not working (1.1.5c)

Offside Stop lamp not working (1.2.1b)

Nearside Front Macpherson strut has slight movement at the upper attachment (2.5.A.1c)

Exhaust has part of the system slightly deteriorated (7.1.1a)

Nearside Front Macpherson strut has slight movement at the upper attachment (2.5.A.1c)

Nearside Front coil spring corroded (2.4.C.1b)

Offside Front coil spring corroded (2.4.C.1b)

nearside rear brake hose ferrule slightly corroded

offside front indicator lens cracked - no white light

offside rear brake hose ferrule slightly corroded

rear plate cracked

under floor has a hole at offside

Nearside Front Direction indicator incorrect colour (1.4.A.2f)

Nearside Rear position lamp(s) excessively deteriorated so that it is not visible from a reasonable distance (1.1.A.3d)

Offside Front Macpherson strut has excessive movement at the upper attachment (2.5.A.1c)

Exhaust has part of the system slightly deteriorated (7.1.1a)

Front bumper insecure

Nearside Front Macpherson strut has slight movement at the upper attachment (2.5.A.1c)

nearside rear brake hose ferrule slightly corroded

offside front indicator lens cracked - no white light

offside rear brake hose ferrule slightly corroded

rear plate cracked

under floor has a hole at offside

Offside Rear Service brake: service brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.7)