2006 Fiat Doblo

Integral body structure is corroded but structural rigidity is not significantly reduced underside (6.1.1 (c) (i))

Nearside Front Coil spring corroded (5.3.1 (b) (i))

Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Nearside Seat belt anchorage prescribed area is corroded but not considered excessive sill area (7.1.1 (a) (i))

Offside Front Coil spring corroded (5.3.1 (b) (i))

Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Offside Seat belt anchorage prescribed area is corroded but not considered excessive sill area (7.1.1 (a) (i))

Parking brake efficiency only just met. It would appear that the braking system requires adjustment or repair

Parking brake lever has little reserve travel

Rear Suspension component corroded but not seriously weakened axle and leaf springs (5.3.3 (b) (i))

Engine MIL inoperative or indicates a malfunction (8.2.2.2 (g))

Integral body structure is corroded but structural rigidity is not significantly reduced underside (6.1.1 (c) (i))

Nearside Front Coil spring corroded (5.3.1 (b) (i))

Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Nearside Seat belt anchorage prescribed area is corroded but not considered excessive sill area (7.1.1 (a) (i))

Offside Front Coil spring corroded (5.3.1 (b) (i))

Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Offside Seat belt anchorage prescribed area is corroded but not considered excessive sill area (7.1.1 (a) (i))

Parking brake efficiency only just met. It would appear that the braking system requires adjustment or repair

Parking brake lever has little reserve travel

Rear Suspension component corroded but not seriously weakened axle and leaf springs (5.3.3 (b) (i))

Rear Direction indicator slightly discoloured both (4.4.3 (a))

parking brake travel indicates adjustment needed

Rear Direction indicator slightly discoloured both (4.4.3 (a))

Registration plate lamp inoperative in the case of a single lamp or all lamps (4.7.1 (b) (ii))

parking brake travel indicates adjustment needed

Offside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Nearside Front Tyre worn close to the legal limit inner edge (4.1.E.1)

Offside Front Tyre worn close to the legal limit inner edge (4.1.E.1)

Offside Front constant velocity joint gaiter deteriorated, but preventing the ingress of dirt (2.5.C.1a)

Offside Rear Tyre worn close to the legal limit inner edge (4.1.E.1)

Nearside Front wing repeater loose

Power steering component(s) has slight seepage from a component pinion shaft (2.3.3b)

Exhaust has a major leak of exhaust gases at front flexi (7.1.2)

Offside Front Inner Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Offside Front Inner Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Offside Front Suspension arm has excessive play in a ball joint (2.4.G.2)

Offside Rear Brakes imbalanced across an axle (3.7.B.5b)

Offside Rear rear brake binding (3.7.B.1)

Rear Brakes imbalanced across an axle Axle 2 (3.7.B.5b)

Nearside Front wing repeater loose

Power steering component(s) has slight seepage from a component pinion shaft (2.3.3b)

handbrake cable insecure and hitting exhaust

Nearside Rear Tyre worn close to the legal limit inner edge (4.1.E.1)

Centre Rear Exhaust has a major leak of exhaust gases from dpf to rear silencer (7.1.2)

Nearside Rear Tyre worn close to the legal limit inner edge (4.1.E.1)

Offside rear parking (secondary) brake grabbing slightly (3.7.B.6b)

Rear Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.5b)

rear parking (secondary) brake imbalance requirements only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.6b)

Centre Brake pipe slightly corroded (3.6.B.2c)

Centre Brake pipe slightly corroded (3.6.B.2c)

Rear Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.5b)

nearside rear brake has a slight bind

offside rear brake has a slight bind

Items removed from driver's view prior to test

Windscreen has damage to an area less than a 10mm circle within zone 'A' (8.3.1a)

Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Items removed from driver's view prior to test

Windscreen has damage to an area less than a 10mm circle within zone 'A' (8.3.1a)

heat shield insecure

Windscreen washer provides insufficient washer liquid (8.2.3)