MOT Status
ValidMileage
132,791 miSignificantly above average — investigate
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Nearside Rear Suspension component mounting repair covered in underseal inner and outer (5.3.6 (a) (i))
Offside Rear Suspension component mounting repair covered in underseal inner and outer (5.3.6 (a) (i))
Parking brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (1.4.2 (a) (i))
Rear Suspension component mounting prescribed area damaged but not considered excessive both sides (5.3.6 (a) (i))
rear axle corroded-under body corroded-sills corroded inner/outer
Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))
Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))
Offside Stop lamp(s) not working (4.3.1 (a) (ii))
Front Brake pad(s) less than 1.5 mm thick (1.1.13 (a) (ii)) DANGEROUS
Parking brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (1.4.2 (a) (i))
rear axle corroded-under body corroded-sills corroded inner/outer
Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))
Nearside Front Macpherson strut corroded but not seriously weakened (5.3.3 (b) (i))
Nearside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Offside Front Macpherson strut corroded but not seriously weakened (5.3.3 (b) (i))
Offside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Under body Heavily underseal Front to Rear including cills, suspension components, pipes and ferules
Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Front Brake disc worn, pitted or scored, but not seriously weakened 2 (1.1.14 (a) (ii))
Front Exhaust mounting defective (6.1.2 (a))
Nearside Rear Shock absorbers has light misting of oil (5.3.2 (b))
Oil leak, but not excessive (8.4.1 (a) (i))
Rear Coil spring corroded Both rear coil springs corroded (5.3.1 (b) (i))
Rear Rear Axle corroded
Under body covered in underseal- front subframe corroded-rear brake hoses corroded
Exhaust emissions likely to be affected by an exhaust leak (8.2.2.1 (b))
Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced Hole in rear sill (6.1.1 (c) (i))
Nearside Rear Service brake excessively binding (1.2.1 (f))
Offside Rear Shock absorbers has a serious fluid leak (5.3.2 (b))
Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Front Brake disc worn, pitted or scored, but not seriously weakened 2 (1.1.14 (a) (ii))
Front Exhaust mounting defective (6.1.2 (a))
Nearside Rear Shock absorbers has light misting of oil (5.3.2 (b))
Oil leak, but not excessive (8.4.1 (a) (i))
Rear Coil spring corroded Both rear coil springs corroded (5.3.1 (b) (i))
Rear Rear Axle corroded
Under body covered in underseal- front subframe corroded-rear brake hoses corroded
Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))
Front Exhaust mounting defective (6.1.2 (a))
Nearside Brake pipe corroded, covered in grease or other material front to rear (1.1.11 (c))
Rear Suspension component mounting repair covered in underseal both inner (5.3.6 (a) (i))
Rear Suspension component mounting repair covered in underseal both sills (5.3.6 (a) (i))
under body under sealed-front sub frame corroded-rear brake hoses corroded
Nearside Front Anti-roll bar linkage pin or bush excessively worn (5.3.4 (a) (i))
Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))
Offside Front Anti-roll bar linkage pin or bush excessively worn (5.3.4 (a) (i))
Offside Rear Brake pipe excessively corroded (1.1.11 (c))
Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))
Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))
Front Exhaust mounting defective (6.1.2 (a))
Nearside Brake pipe corroded, covered in grease or other material front to rear (1.1.11 (c))
Rear Suspension component mounting repair covered in underseal both sills (5.3.6 (a) (i))
under body under sealed-front sub frame corroded-rear brake hoses corroded
Front Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))
Nearside Rear Coil spring corroded (5.3.1 (b) (i))
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Offside Rear Brake hose has slight corrosion to ferrule (1.1.12 (f) (i))
Offside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Offside Rear Coil spring corroded (5.3.1 (b) (i))
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Front Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))
Nearside Rear Coil spring corroded (5.3.1 (b) (i))
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Offside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Offside Rear Coil spring corroded (5.3.1 (b) (i))
Rear Axle Corroded
Nearside Front Lower Suspension arm pin or bush excessively worn Rear Bush (5.3.4 (a) (i))
Offside Rear Shock absorbers has a serious fluid leak (5.3.2 (b))
Parking brake efficiency below requirements (1.4.2 (a) (i))
Parking brake lever has excessive movement indicating incorrect adjustment (1.1.6 (c))
Offside Front Wheel bearing so rough it is likely to overheat or break up (5.1.3 (b) (ii)) DANGEROUS
Central Rear Shock absorbers has slight external damage to the casing (5.3.2 (b))
Front Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))
Nearside Rear Coil spring corroded (5.3.1 (b) (i))
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Offside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Offside Rear Coil spring corroded (5.3.1 (b) (i))
Rear Axle Corroded
Brake pipe corroded, covered in grease or other material going to both rear flexi (1.1.11 (c))
Coil spring corroded both rear (5.3.1 (b) (i))
Front Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))
Seat belt anchorage prescribed area is corroded but not considered excessive both inner sills (7.1.1 (a) (i))
Suspension component mounting prescribed area is corroded but not considered excessive both inner sills (5.3.6 (a) (i))
Suspension component mounting prescribed area is corroded but not considered excessive both rear floors (5.3.6 (a) (i))
Suspension component mounting prescribed area is corroded but not considered excessive both rear outer sills (5.3.6 (a) (i))
Nearside Front Brake pad(s) less than 1.5 mm thick (1.1.13 (a) (ii)) DANGEROUS
Nearside Front Tyre tread depth below requirements of 1.6mm (5.2.3 (e)) DANGEROUS
Offside Front Brake pad(s) less than 1.5 mm thick (1.1.13 (a) (ii)) DANGEROUS
Offside Front Tyre tread depth below requirements of 1.6mm (5.2.3 (e)) DANGEROUS
Offside Front Wheel bearing so rough it is likely to overheat or break up (5.1.3 (b) (ii)) DANGEROUS
Body has slight corrosion (6.1.B.2)
Front Brake pad(s) wearing thin (3.5.1g)
Front Sub-frame corroded but not seriously weakened (2.4.G.1)
Nearside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Nearside Front Upper Anti-roll bar linkage rubber mounting deteriorated but not resulting in excessive movement (2.4.G.2)
Nearside Rear Shock absorber has slight corrosion to the casing (2.7.2a)
Nearside Rear coil spring corroded (2.4.C.1b)
Offside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Offside Front Upper Anti-roll bar linkage rubber mounting deteriorated but not resulting in excessive movement (2.4.G.2)
Offside Rear Shock absorber has slight corrosion to the casing (2.7.2a)
Offside Rear coil spring corroded (2.4.C.1b)
Nearside Front Front position lamp(s) not working (1.1.A.3b)
Nearside Front Headlamp aim beam image obviously incorrect (1.8.A.1b)
Nearside Rear rear brake binding (3.7.B.1)
Offside Rear rear brake binding (3.7.B.1)
Offside Rear rear parking (secondary) brake grabbing severely (3.7.B.6b)
Parking brake: efficiency below requirements (3.7.B.7)
Body has slight corrosion (6.1.B.2)
Front Brake pad(s) wearing thin (3.5.1g)
Front Sub-frame corroded but not seriously weakened (2.4.G.1)
Nearside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Nearside Front Upper Anti-roll bar linkage rubber mounting deteriorated but not resulting in excessive movement (2.4.G.2)
Nearside Rear Shock absorber has slight corrosion to the casing (2.7.2a)
Nearside Rear coil spring corroded (2.4.C.1b)
Offside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Offside Front Upper Anti-roll bar linkage rubber mounting deteriorated but not resulting in excessive movement (2.4.G.2)
Offside Rear Shock absorber has slight corrosion to the casing (2.7.2a)
Offside Rear coil spring corroded (2.4.C.1b)
Front Lower Suspension arm rubber bush deteriorated but not resulting in excessive movement rear (2.4.G.2)
Front brake disc modified but not seriously weakened (3.5.1n)
Nearside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Nearside Rear coil spring corroded (2.4.C.1b)
Nearside Rear wheel sticking slightly
Offside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Offside Rear coil spring corroded (2.4.C.1b)
both rear shockers corroded
Front Windscreen wiper does not clear the windscreen effectively (8.2.2)
Offside Front Front position lamp(s) not working (1.1.A.3b)
Nearside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Nearside Rear coil spring corroded (2.4.C.1b)
Nearside Rear wheel sticking slightly
Offside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Offside Rear coil spring corroded (2.4.C.1b)
both rear shockers corroded
Offside Front Tyre worn close to the legal limit (4.1.E.1)
nearside rear wheel has slight bind
Offside Registration plate lamp not working (1.1.C.1d)
Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)
Nearside Rear Tyre worn close to the legal limit (4.1.E.1)
both rear tyre treads splitting
offside rear light damaged
How Reliable is the Toyota Aygo?
Based on 3,073,569 MOT tests across 286,185 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
SV06 XLG is a 2006 Toyota Aygo in Red with a 998cc petrol engine. This vehicle has been through 26 MOT tests with a personal pass rate of 69.2%.
Across all 2006 Toyota Aygo models, the average MOT pass rate is 73.6% with a typical mileage of 60,291 miles. This particular vehicle has a lower pass rate than the average for its year, which may indicate maintenance issues worth investigating.
The most common reason a Toyota Aygo fails its MOT is tyre tread depth below requirements of 1.6mm, accounting for 33,372 recorded failures. If you're considering buying SV06 XLG, it's worth having these areas checked by a mechanic before committing.
The Toyota Aygo typically stays on UK roads for around 21 years. At 20 years old, this Toyota Aygo is approaching the upper end of the typical lifespan for this model.
Frequently Asked Questions
How do I check the history of SV06 XLG?
You can check the full history of SV06 XLG by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was SV06 XLG registered?
SV06 XLG is a 2006 Toyota Aygo, first registered on 31 March 2006.
Is SV06 XLG safe to buy?
The MOT history for SV06 XLG shows 26 tests with a 69.2% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does SV06 XLG have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on SV06 XLG. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.