2007 Ssangyong Rexton

Central Rear Exhaust has a major leak of exhaust gases (6.1.2 (a))

Horn not working (7.7 (a) (ii))

Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Rear chassis leg (5.3.6 (a) (i))

Offside Front Upper Suspension arm ball joint excessively worn (5.3.4 (a) (i))

Offside Rear Exhaust has a major leak of exhaust gases (6.1.2 (a))

Offside Rear Exhaust system insecure (6.1.2 (a))

Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Chassis leg (5.3.6 (a) (i))

Front Brake pad(s) wearing thin (3.5.1g)

Rear Tyre worn close to the legal limit both very close to 1.6 mm STRONGLY ADVISE TO BE REPLACED SOON (4.1.E.1)

Rear bumper damaged due to exhaust tailpipe badly corroded and partly missing.

Underside of vehicle heavily corroded at various points

Nearside Front Brake hose twisted (3.6.B.4c)

Nearside Front Upper Front suspension ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt (2.4.G.2)

Offside Brake cable has restricted free movement siezed (3.5.1k)

Offside Headlamp not working on dipped beam (1.7.5a)

Offside Rear Lower Rear position lamp(s) not working (1.1.A.3b)

Offside Rear Suspension spring mounting prescribed area is excessively corroded chassis (2.4.A.3)

Offside Rear Vehicle structure excessively corroded within 30cm of towbar mounting chassis (6.6.6)

Parking brake: efficiency below requirements (3.7.B.7)

Rear Brake pad(s) less than 1.5 mm thick (3.5.1g)

Rear Tyre tread depth below requirements of 1.6mm both (4.1.E.1)

Rear brake disc in such a condition that it is seriously weakened (3.5.1i)

rear parking brake recording little or no effort both (3.7.B.6a)

Front Brake pad(s) wearing thin (3.5.1g)

Rear bumper damaged due to exhaust tailpipe badly corroded and partly missing.

Underside of vehicle heavily corroded at various points

General surface corrosion on various parts of chassis and underbody

Nearside electric air con fan motor siezed

Offside front tyre wearing on edges

Fuel tank leaking (7.2.3)

Nearside Front Brake pipe excessively corroded (3.6.B.2c)

Nearside Front Tyre tread depth below requirements of 1.6mm insufficient tread width (4.1.E.1)

Nearside Front wheel bearing has excessive play (2.5.A.3c)

Nearside Front wheel bearing rough when rotated (2.5.A.2)

Nearside Lower Rear position lamp(s) not working (1.1.A.3b)

Offside Front suspension has excessive play in a lower suspension ball joint (2.5.B.1a)

Offside Rear reflector excessively damaged so that its function is impaired (1.5.1c)

Offside Registration plate lamp not working (1.1.C.1d)

Parking brake: efficiency below requirements (3.7.C.1b)

General surface corrosion on various parts of chassis and underbody

Nearside electric air con fan motor siezed

Offside front tyre wearing on edges

Fuel tank insecure (7.2.1)

Offside Front Brake pipe excessively corroded (3.6.B.2c)

Nearside Front Brake pipe slightly corroded (3.6.B.2c)

Nearside Front Tyre worn close to the legal limit (4.1.E.1)

front discs worn

rear discs worn

Nearside Stop lamp not working (1.2.1b)

Offside Track rod end ball joint has excessive play (2.2.B.1f)

rear discs worn

Offside Front Upper Brake pipe slightly corroded (3.6.B.2c)

Parking brake: parking brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.7)

Vehicle's internal headlight adjuster altered to recheck lights

Nearside Front Track rod end ball joint has excessive play (2.2.B.1f)

Nearside Front Tyre has ply or cords exposed (4.1.D.1b)

Nearside Windscreen wiper does not clear the windscreen effectively (8.2.2)

Offside Front Track rod end ball joint has excessive play (2.2.B.1f)

Offside Windscreen wiper does not clear the windscreen effectively (8.2.2)

Child seat fitted not allowing full inspection of adult belt

n/s/f tyre wall slight damage and wearing uneven