2007 Subaru Forester

Engine MIL inoperative or indicates a malfunction (8.2.1.2 (h))

Nearside Front Macpherson strut corroded and seriously weakened (5.3.3 (b) (i))

Nearside Headlamp not working on dipped beam (4.1.1 (a) (ii))

Nearside Rear Lower Seat belt anchorage prescribed area strength or continuity significantly reduced inner wheel arch (7.1.1 (a) (i))

Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner sill (5.3.6 (a) (i))

Nearside Track rod end ball joint dust cover excessively damaged or deteriorated so that it no longer prevents the ingress of dirt (2.1.3 (g) (ii))

Offside Front Lower Suspension arm corroded and seriously weakened (5.3.3 (b) (i))

Offside Rear Outer Drive shaft joint constant velocity boot split or insecure, no longer prevents the ingress of dirt (6.1.7 (g) (ii))

Offside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced inner wheel arch (7.1.1 (a) (i))

Offside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced outer sill (7.1.1 (a) (i))

Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner sill (5.3.6 (a) (i))

Offside Rear Upper Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))

Front Brake pad(s) wearing thin (1.1.13 (a) (ii))

Front Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Integral body structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Nearside Front Anti-roll bar linkage ball joint has slight play (5.3.4 (a) (i))

Nearside Front Lower Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))

Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive chassis leg (5.3.6 (a) (i))

Nearside Rear Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))

Nearside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Nearside Rear Upper Suspension spring mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Nearside Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Offside Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive chassis leg (5.3.6 (a) (i))

Offside Rear Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))

Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Rear Suspension arm corroded but not seriously weakened all (5.3.3 (b) (i))

covers fitted to outer sills obscuring full inspection

Front Registration plate insecure but not likely to fall off (0.1 (a))

Integral body structure is corroded but structural rigidity is not significantly reduced o/s and n/s sills (6.1.1 (c) (i))

Offside Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

brake anti slip

Exhaust Lambda reading after 2nd fast idle outside specified limits (8.2.1.2 (c))

Exhaust carbon monoxide content after 2nd fast idle exceeds manufacturer's specified limits (8.2.1.2 (a))

Nearside Rear Brake hose ferrule excessively corroded (1.1.12 (f) (i))

Nearside Rear Brake pipe excessively corroded (1.1.11 (c))

Offside Rear Brake hose ferrule excessively corroded (1.1.12 (f) (i))

Offside Rear Brake pipe excessively corroded (1.1.11 (c))

Front Registration plate insecure but not likely to fall off (0.1 (a))

Integral body structure is corroded but structural rigidity is not significantly reduced o/s and n/s sills (6.1.1 (c) (i))

Offside Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

brake anti slip

Exhaust has a minor leak of exhaust gases (6.1.2 (a))

Exhaust heat shield insecure

Rear Brake hose has slight corrosion to ferrule (1.1.12 (f) (i))

Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Exhaust carbon monoxide content after 2nd fast idle exceeds manufacturer's specified limits (8.2.1.2 (a))

Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))

Offside Front Brake pipe excessively corroded (1.1.11 (c))

Offside Front Position lamp not working (4.2.1 (a) (ii))

Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))

Offside Front Anti-roll bar linkage insecure and impairing directional stability (5.3.3 (a) (ii)) DANGEROUS

Exhaust has a minor leak of exhaust gases (6.1.2 (a))

Exhaust heat shield insecure

Exhaust mounting defective (6.1.2 (a))

Front Registration plate insecure but not likely to fall off (0.1 (a))

Rear Brake hose has slight corrosion to ferrule (1.1.12 (f) (i))

Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Tyre slightly damaged/cracking or perishing Both rear (5.2.3 (d) (ii))

Nearside Front Lower Suspension arm ball joint excessively worn (5.3.4 (a) (i))

Offside Rear Shock absorbers has a serious fluid leak (5.3.2 (b))

Driver's seat insecure (6.2.5 (a) (ii)) DANGEROUS

Tyre slightly damaged/cracking or perishing Both rear (5.2.3 (d) (ii))

Nearside Front Track rod end ball joint has slight play (2.1.3 (b) (i))

Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Offside Front Brake pipe inadequately clipped or supported (1.1.11 (d) (i))

Power steering pipe/hose slightly corroded (2.1.5 (g) (i))

n/s/r and o/s/r inner sills corroded / n/s/r tyre perished

Battery insecure and likely to fall from carrier (4.13 (a) (ii))

Front Tyre(s) of different sizes are fitted on the same axle. (5.2.3 (b))

Nearside Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))

Offside Front Position lamp not working (4.2.1 (a) (ii))

Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))

Rear Tyre(s) of different sizes are fitted on the same axle. (5.2.3 (b))

Nearside Front Track rod end ball joint has slight play (2.1.3 (b) (i))

Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Offside Front Brake pipe inadequately clipped or supported (1.1.11 (d) (i))

Power steering pipe/hose slightly corroded (2.1.5 (g) (i))

o/s and n/s sills corroded / o/s/f tyre perished

EML light on

Nearside Rear shock absorber slight misting of oil

very slight play at n/s/f steering arm

Nearside Front Anti-roll bar linkage has slight play in a ball joint (2.4.G.2)

Emissions not tested due to leak (7.3.A.1)

Rear Exhaust has a major leak of exhaust gases (7.1.2)

Nearside Front Tyre worn close to the legal limit also perished badly (4.1.E.1)

Offside Front Tyre worn close to the legal limit also perished badly (4.1.E.1)

brake pedal anti-slip worn

battery insecure

Front Brake pad(s) wearing thin (3.5.1g)

Offside Rear Tyre(s) incorrect because different size tyres are fitted on the same axle. (4.1.A.1a)

Nearside Front Brake lining(s) less than 1.5 mm thick (3.5.1g)

Nearside front brake discs badly scored

both front tyres worn on edges

Exhaust has a major leak of exhaust gases (7.1.2)

Exhaust system not adequately supported (7.1.1)

Front Windscreen wiper does not clear the windscreen effectively (8.2.2)

Rear Tyre worn close to the legal limit (4.1.E.1)

Rear Tyre worn close to the legal limit (4.1.E.1)