MOT Status
ExpiredMileage
108,943 miSignificantly above average — investigate
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Exhaust emits excessive dense blue smoke during acceleration (8.2.1.2 (g))
Front Exhaust has a major leak of exhaust gases (6.1.2 (a))
Nearside Front Suspension arm ball joint excessively worn (5.3.4 (a) (i))
Nearside Rear Brake hose ferrule excessively corroded (1.1.12 (f) (i))
Nearside Rear Outer Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced sill (6.1.1 (c) (i))
Nearside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced inner sill (6.1.1 (c) (i))
Offside Rear Brake hose ferrule excessively corroded (1.1.12 (f) (i))
Offside Rear Outer Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced sill (6.1.1 (c) (i))
Offside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced inner sill (6.1.1 (c) (i))
Parking brake efficiency below requirements (1.4.2 (a) (i))
Rear Brakes imbalanced across an axle Axle 2 (1.2.1 (b) (i))
Service brake efficiency below requirements (1.2.2 (a) (i))
Brake pipe corroded, covered in grease or other material all under body brake pipes coated in fresh under seal (1.1.11 (c))
Front Brake disc worn, pitted or scored, but not seriously weakened both front (1.1.14 (a) (ii))
Front Exhaust mounting defective front mounting has broken off (6.1.2 (a))
Offside Front Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))
Parking brake lever defective but can be satisfactorily operated hand brake at end of travel (1.1.6 (d))
advise under body coated in fresh underseal
Front Brake disc worn, but not excessively (1.1.14 (a) (i))
Offside Rear Integral body structure is repaired but structural rigidity is not significantly reduced Lower sill (6.1.1 (d) (i))
Rear Suspension component mounting repair covered in underseal Both sides (5.3.6 (a) (i))
Nearside Front Headlamp not working on dipped beam (4.1.1 (a) (ii))
Offside Front Lower Suspension arm ball joint excessively worn (5.3.4 (a) (i))
Offside Front Wheel bearing slightly noisy (5.1.3 (b) (i))
Offside Rear Integral body structure is repaired but structural rigidity is not significantly reduced Lower sill (6.1.1 (d) (i))
Rear Suspension component mounting repair covered in underseal Both sides (5.3.6 (a) (i))
Rear axle has surface slightly corrosion
Nearside Front Headlamp not working on dipped beam (4.1.1 (a) (ii))
Nearside Rear Suspension component mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected at trailing arm mounting (5.3.6 (a) (ii)) DANGEROUS
Offside Rear Suspension component mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected at trailing arm mounting bolt (5.3.6 (a) (ii)) DANGEROUS
Front Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))
rear axle has surface corrosion
Nearside Brake pipe excessively corroded front to rear (1.1.11 (c))
Nearside Rear Seat belt buckle not functioning as intended not returning (7.1.2 (d))
Offside Front Brake pipe excessively corroded (1.1.11 (c))
Offside Rear Brake pipe excessively corroded (1.1.11 (c))
Parking brake efficiency below requirements (1.4.2 (a) (i))
Windscreen wiper does not clear the windscreen effectively (3.4 (b) (ii))
Offside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Offside Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))
Brake pipe excessively corroded Front to n/s rear at rear section (1.1.11 (c))
Nearside Front Anti-roll bar linkage pin or bush excessively worn (5.3.4 (a) (i))
Nearside Front Service brake excessively fluctuating (1.2.1 (e))
Nearside Rear Seat belt not functioning as intended Fails to recoil (7.1.2 (c))
Nearside Suspension component mounting prescribed area excessively corroded significantly reducing structural strength outer sill (5.3.6 (a) (i))
Offside Front Anti-roll bar linkage pin or bush excessively worn (5.3.4 (a) (i))
Offside Front Brake pipe excessively corroded (1.1.11 (c))
Offside Rear Brake pipe excessively corroded (1.1.11 (c))
Offside Suspension component mounting prescribed area excessively corroded significantly reducing structural strength outer sill (5.3.6 (a) (i))
Parking brake lever has excessive movement indicating incorrect adjustment (1.1.6 (c))
Nearside Front Lower Suspension arm ball joint likely to become detached (5.3.4 (a) (ii)) DANGEROUS
Central Upper Stop lamp(s) with a multiple light source up to 1/2 not functioning (4.3.1 (a) (i))
Engine noisy.
Offside Rear Seat belt slightly damaged slow to recoil (7.1.2 (b) (i))
Offside Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))
Central Upper Stop lamp(s) light intensity obviously reduced (4.3.3 (a) (i))
Nearside Front Anti-roll bar linkage pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Offside Front Anti-roll bar linkage pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Nearside Front Position lamp not working (4.2.1 (a))
Offside Front Service brake excessively binding (1.2.1 (f))
Offside Front Service brake excessively fluctuating (1.2.1 (e))
Offside Rear Wheel bearing rough when rotated (5.1.3 (b) (i))
Offside Stop lamp(s) not working (4.3.1 (a) (ii))
Central Upper Stop lamp(s) light intensity obviously reduced (4.3.3 (a) (i))
Nearside Front Anti-roll bar linkage pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Nearside Front Service brake fluctuating, but not excessively (1.2.1 (e))
Offside Front Anti-roll bar linkage pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Nearside Rear Shock absorber has slight corrosion to the casing (2.7.2a)
Offside Rear Shock absorber has slight corrosion to the casing (2.7.2a)
Nearside Front Suspension arm rubber mounting deteriorated resulting in excessive movement rear bush (2.4.G.2)
Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Offside Front Suspension arm rubber mounting deteriorated resulting in excessive movement rear bush (2.4.G.2)
Offside Front wheel bearing has excessive play (2.5.A.3c)
rear brake application uneven (3.7.B.2)
Nearside Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)
Nearside Rear Shock absorber has slight corrosion to the casing (2.7.2a)
Nearside Rear brake binding
Nearside front brake fluctuating, but not excessively (3.7.B.3)
Offside Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)
Offside Rear Shock absorber has slight corrosion to the casing (2.7.2a)
Offside front brake fluctuating, but not excessively (3.7.B.3)
Front front brake fluctuating, but not excessively (3.7.B.3)
Nearside Rear Shock absorber has slight corrosion to the casing (2.7.2a)
Offside Rear Shock absorber has slight corrosion to the casing (2.7.2a)
Central Exhaust system not adequately supported Exhaust hanger broken (7.1.1)
Nearside Rear Registration plate lamp not working (1.1.C.1d)
rear brake application uneven (3.7.B.2)
Front front brake fluctuating, but not excessively (3.7.B.3)
Nearside Rear Shock absorber has slight corrosion to the casing (2.7.2a)
Offside Rear Shock absorber has slight corrosion to the casing (2.7.2a)
Rear Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. Imbalance of 39% (3.7.B.5b)
Nearside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Offside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Front Windscreen wiper does not clear the windscreen effectively (8.2.2)
Offside Rear Registration plate lamp not working (1.1.C.1d)
Nearside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Offside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Child seat fitted not allowing full inspection of adult belt
o/s/r brake sticky
Exhaust emissions Lambda reading after 2nd fast idle outside specified limits (7.3.D.3)
Offside front brake excessively fluctuating (3.7.B.3)
Child seat fitted not allowing full inspection of adult belt
Nearside Stop lamp not working (1.2.1b)
front discs heavlly lipped and corroeded
o/s/r brake sticky
Child seat fitted not allowing full inspection of adult belt
front discs corroded inner
front reg starting to de laminate
Nearside Front constant velocity joint gaiter insecure to the extent that it no longer prevents the ingress of dirt etc (2.5.C.1a)
Child seat fitted not allowing full inspection of adult belt
front discs corroded inner
front reg starting to de laminate
front discs starting to lip
n/s/r seat belt not checked due to child seat
How Reliable is the Toyota Aygo?
Based on 3,073,569 MOT tests across 286,185 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
SV08 YTN is a 2008 Toyota Aygo in Silver with a 998cc petrol engine. This vehicle has been through 24 MOT tests with a personal pass rate of 54.2%.
Across all 2008 Toyota Aygo models, the average MOT pass rate is 74.7% with a typical mileage of 54,541 miles. This particular vehicle has a lower pass rate than the average for its year, which may indicate maintenance issues worth investigating.
The most common reason a Toyota Aygo fails its MOT is tyre tread depth below requirements of 1.6mm, accounting for 33,372 recorded failures. If you're considering buying SV08 YTN, it's worth having these areas checked by a mechanic before committing.
The Toyota Aygo typically stays on UK roads for around 21 years. At 18 years old, this Toyota Aygo is approaching the upper end of the typical lifespan for this model.
Frequently Asked Questions
How do I check the history of SV08 YTN?
You can check the full history of SV08 YTN by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was SV08 YTN registered?
SV08 YTN is a 2008 Toyota Aygo, first registered on 31 March 2008.
Is SV08 YTN safe to buy?
The MOT history for SV08 YTN shows 24 tests with a 54.2% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does SV08 YTN have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on SV08 YTN. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.