2009 Honda Cr-v

Front Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Front Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Nearside Front Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))

Offside Front Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))

Brake pipe corroded, covered in grease or other material Front and Rear (1.1.11 (c))

Front Suspension arm pin or bush worn but not resulting in excessive movement Nearside and Offside (5.3.4 (a) (i))

Nearside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Parking brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (1.4.2 (a) (i))

Rear Suspension arm pin or bush worn but not resulting in excessive movement Nearside and Offside (5.3.4 (a) (i))

Rear Suspension component mounting repair covered in underseal Nearside and Offside (5.3.6 (a) (i))

Rear Vehicle structure is corroded but structural rigidity is not significantly reduced Nearside and Offside inner and outer sill (6.1.1 (c) (i))

Sub-frame corroded but not seriously weakened Front and Rear (5.3.3 (b) (i))

Suspension component corroded but not seriously weakened Front and Rear (5.3.3 (b) (i))

Suspension component mounting prescribed area is corroded but not considered excessive Front and rear (5.3.6 (a) (i))

Vehicle structure is corroded but structural rigidity is not significantly reduced Front and Rear (6.1.1 (c) (i))

Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))

Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))

Parking brake efficiency below requirements (1.4.2 (a) (i))

Nearside Front Tyre tread depth below requirements of 1.6mm (5.2.3 (e)) DANGEROUS

Offside Front Tyre tread depth below requirements of 1.6mm (5.2.3 (e)) DANGEROUS

Brake pipe corroded, covered in grease or other material Front and Rear (1.1.11 (c))

Front Suspension arm pin or bush worn but not resulting in excessive movement Nearside and Offside (5.3.4 (a) (i))

Nearside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Rear Suspension arm pin or bush worn but not resulting in excessive movement Nearside and Offside (5.3.4 (a) (i))

Rear Vehicle structure is corroded but structural rigidity is not significantly reduced Nearside and Offside inner and outer sill (6.1.1 (c) (i))

Sub-frame corroded but not seriously weakened Front and Rear (5.3.3 (b) (i))

Suspension component corroded but not seriously weakened Front and Rear (5.3.3 (b) (i))

Suspension component mounting prescribed area is corroded but not considered excessive Front and rear (5.3.6 (a) (i))

Vehicle structure is corroded but structural rigidity is not significantly reduced Front and Rear (6.1.1 (c) (i))

Front Suspension arm pin or bush worn but not resulting in excessive movement Nearside and Offside (5.3.4 (a) (i))

Nearside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Parking brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (1.4.2 (a) (i))

Front Suspension arm pin or bush worn but not resulting in excessive movement Nearside and Offside (5.3.4 (a) (i))

Nearside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Offside Front Position lamp not working (4.2.1 (a) (ii))

Parking brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (1.4.2 (a) (i))

Anti-roll bar linkage ball joint has slight play all four (5.3.4 (a) (i))

Front Lower Suspension arm pin or bush worn but not resulting in excessive movement both (5.3.4 (a) (i))

Front Shock absorbers has light misting of oil both (5.3.2 (b))

Rear Fuel Pipe/s corroded ()

Rear Shock absorbers has slight external damage to the casing both (5.3.2 (b))

Nearside Front Headlamp not working on dipped beam (4.1.1 (a) (ii))

Front Brake pad(s) less than 1.5 mm thick (1.1.13 (a) (ii)) DANGEROUS

Rear Anti-roll bar pin or bush likely to become detached both D bushes (5.3.4 (a) (ii)) DANGEROUS

Rear Brake pad(s) less than 1.5 mm thick (1.1.13 (a) (ii)) DANGEROUS

Anti-roll bar linkage ball joint has slight play all four (5.3.4 (a) (i))

Front Lower Suspension arm pin or bush worn but not resulting in excessive movement both (5.3.4 (a) (i))

Front Shock absorbers has light misting of oil both (5.3.2 (b))

Rear Fuel Pipe/s corroded ()

Rear Shock absorbers has slight external damage to the casing both (5.3.2 (b))

Front Inner Brake pad(s) wearing thin (1.1.13 (a) (ii))

Nearside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Offside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Front Inner Brake pad(s) wearing thin (1.1.13 (a) (ii))

Nearside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Offside Front Headlamp not working on dipped beam (4.1.1 (a) (ii))

Offside Front Position lamp not working (4.2.1 (a) (ii))

Offside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Windscreen washer provides insufficient washer liquid (3.5 (a))

Nearside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Offside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Offside Front Anti-roll bar linkage has excessive play in a ball joint (2.4.G.2)

Nearside Rear Inner Tyre worn close to the legal limit (4.1.E.1)

Offside Rear Inner Tyre worn close to the legal limit (4.1.E.1)

both front shock absorbers protective gaiters split

Offside Front Brake pad(s) wearing thin (3.5.1g)

both front macpherson strut protective covers split

nearside front shock absorber protective gaiter split

nearside front tyre worn on inner and outer edges

offside front shock absorber protective gaiter split

offside front tyre worn on inner and outer edges

Parking brake lever has little reserve travel (3.1.6b)

due to design both rear wheels difficult to turn by hand to check bearing roughness

Parking brake lever has little reserve travel (3.1.6b)

n/s/r tyre worn to 2mm on inner edge of tread

Front Brake pad(s) less than 1.5 mm thick (3.5.1g)

Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.5b)

Parking brake lever has little reserve travel (3.1.6b)

brake fluid low

front brake juddering slightly (3.7.A.2b)

n/s/r tyre worn to 2mm on inner edge of tread