2001 Seat Inca

Nearside Front Lower Suspension arm has slight play in a ball joint (2.4.G.2)

Offside floor gromet missing

suspension components corroded

underside of vehicle corroded

Nearside Front Macpherson strut has slight movement at the upper attachment (2.5.A.1c)

Nearside Rear Tyre worn close to the legal limit (4.1.E.1)

Offside Front Suspension arm has slight play in a ball joint (2.4.G.2)

Offside Rear Tyre worn close to the legal limit (4.1.E.1)

Front Anti-roll bar linkage fractured x 2 (2.4.G.1)

Nearside Front Front wheel bearing rough when rotated (2.5.A.2)

Nearside Front Macpherson strut has excessive movement at the upper attachment (2.5.A.1c)

Nearside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Nearside Seat belt anchorage prescribed area is excessively corroded inner sill / floor (5.2.6)

Offside Front Front constant velocity joint is excessively worn (2.5.C.1b)

Offside Front Lower Ball joint has excessive play (2.2.B.1f)

Offside Front Subframe mounting prescribed area is excessively corroded outrigger (2.4.A.3)

Offside Front Track rod end ball joint has excessive play (2.2.B.1f)

Offside Rear Suspension spring mounting prescribed area is excessively corroded outer sill (2.4.A.3)

Rear Registration plate lamp not working x 2 (1.1.C.1d)

Service brake: efficiency below requirements (3.7.B.7)

Front brake disc worn, pitted or scored, but not seriously weakened x 2 (3.5.1i)

Offside Rear Tyre worn close to the legal limit (4.1.E.1)

Front Brake pad(s) wearing thin (3.5.1g)

Front Macpherson strut has slight movement at the upper attachment (2.5.A.1c)

Nearside Front Ball joint has slight play (2.2.B.1f)

Battery insecure (1.9.1)

Nearside Front Headlamp insecure (1.7.3)

Nearside Front Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Offside Front wheel bearing rough when rotated (2.5.A.2)

Front Brake pad(s) wearing thin (3.5.1g)

Front Macpherson strut has slight movement at the upper attachment (2.5.A.1c)

Nearside Front Ball joint has slight play (2.2.B.1f)

Nail in nearside rear tyre

exhaust system corroded

n/s rear tyre worn

steering pipes corroded

Battery insecure (1.9.1)

Exhaust has a major leak of exhaust gases (7.1.2)

Nearside Front Suspension arm ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt (2.4.G.2)

Nearside Front Suspension arm has excessive play in a ball joint (2.4.G.2)

Nearside Front coil spring broken (2.4.C.1a)

Nearside Rear Shock absorber has a serious fluid leak (2.7.3)

Nail in nearside rear tyre

exhaust system corroded

n/s rear tyre worn

steering pipes corroded

Offside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

battery loose

exhaust corroded

steering pipes corroded

Nearside Front constant velocity joint gaiter damaged to the extent that it no longer prevents the ingress of dirt etc (2.5.C.1a)

Nearside Windscreen wiper does not clear the windscreen effectively (8.2.2)

Nearside front brake binding (3.7.B.1)

Offside Rear Tyre not fitted in accordance with side wall instructions (4.1.D.1f)

Offside Windscreen wiper does not clear the windscreen effectively (8.2.2)

Offside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

battery loose

exhaust corroded

steering pipes corroded

Battery insecure

Centre Exhaust has part of the system slightly deteriorated (7.1.1a)

Front Exhaust has part of the system slightly deteriorated (7.1.1a)

Nearside Rear Tyre worn close to the legal limit (4.1.E.1)

Rear Exhaust has part of the system slightly deteriorated (7.1.1a)

handbrake cable needs adjusting

nearsiode front sill holed

offside front brake slight bind

steering pipes corroded

Brake load sensing valve linkage defective and function impaired (3.6.E.3)

Brake pedal has insufficient reserve movement (3.3.A.5)

Brake pedal spongy (3.3.B.1b)

Nearside Front Direction indicator incorrect colour (1.4.A.2f)

Nearside Rear rear brake recording little or no effort (3.7.B.5a)

Nearside front brake binding (3.7.B.1)

Battery insecure

Centre Exhaust has part of the system slightly deteriorated (7.1.1a)

Front Exhaust has part of the system slightly deteriorated (7.1.1a)

Nearside Rear Tyre worn close to the legal limit (4.1.E.1)

Rear Exhaust has part of the system slightly deteriorated (7.1.1a)

handbrake cable needs adjusting

nearsiode front sill holed

offside front brake slight bind

steering pipes corroded

Front brake disc slightly scored (3.5.1h)

Nearside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Offside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Nearside Front Macpherson strut has excessive movement at the upper attachment (2.5.A.1c)

Offside Front Macpherson strut has excessive movement at the upper attachment (2.5.A.1c)

Rear Brake load sensing valve linkage defective and function impaired (3.6.E.3)

Front brake disc slightly scored (3.5.1h)

Nearside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Offside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Brakes imbalanced across an axle (3.7.B.5b)

Exhaust has part of the system excessively deteriorated (7.1.1a)

Nearside Front brake disc excessively pitted (3.5.1h)

Nearside rear brake binding (3.7.B.1)

Offside Front brake disc excessively pitted (3.5.1h)

Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.5b)

Centre Brake pipe excessively corroded (3.6.B.2c)

Centre Rear Brake pipe excessively corroded (3.6.B.2c)

Nearside Front Brake pipe excessively corroded (3.6.B.2c)

Nearside Rear Brake pipe excessively corroded (3.6.B.2c)

Nearside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Offside Front Brake pipe excessively corroded (3.6.B.2c)

Offside Rear Brake pipe excessively corroded (3.6.B.2c)

Offside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.5b)