MOT Status
ExpiredMileage
125,648 miSignificantly above average — investigate
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Nearside Rear Inner Seat belt anchorage prescribed area is excessively corroded (5.2.6)
Nearside Rear Outer Seat belt anchorage prescribed area is excessively corroded sill (5.2.6)
Offside Rear Inner Seat belt anchorage prescribed area is excessively corroded sill (5.2.6)
Nearside Front Lower Suspension arm ball joint dust cover deteriorated, but preventing the ingress of dirt (2.4.G.2)
Offside Front Lower Suspension arm ball joint dust cover deteriorated, but preventing the ingress of dirt (2.4.G.2)
Offside Front brake binding slightly
Front Suspension arm ball joint dust cover deteriorated, but preventing the ingress of dirt all lower (2.4.G.2)
Offside Suspension component mounting prescribed area is corroded but not considered excessive front floor (2.4.A.3)
Front front brake application uneven (3.7.B.2)
Nearside Front Suspension component mounting prescribed area is excessively corroded floor (2.4.A.3)
Nearside Rear Suspension component mounting prescribed area is excessively corroded sill and closing panel (2.4.A.3)
Nearside Seat belt anchorage prescribed area is excessively corroded sill (5.2.6)
Offside Rear Suspension component mounting prescribed area is excessively corroded sill and closing panel (2.4.A.3)
Offside Rear rear brake binding (3.7.B.1)
Offside Seat belt anchorage prescribed area is excessively corroded sill (5.2.6)
Front Suspension arm ball joint dust cover deteriorated, but preventing the ingress of dirt all lower (2.4.G.2)
Offside Suspension component mounting prescribed area is corroded but not considered excessive front floor (2.4.A.3)
Nearside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Nearside Seat belt anchorage prescribed area is excessively corroded (5.2.6)
Nearside front brake binding (3.7.B.1)
Offside Seat belt anchorage prescribed area is excessively corroded (5.2.6)
Nearside Rear Brake hose has slight corrosion to ferrules (3.6.B.4e)
Nearside Rear Suspension arm corroded but not seriously weakened (2.4.G.1)
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Rear Brake hose has slight corrosion to ferrules (3.6.B.4e)
Offside Rear Brake pipe slightly corroded (3.6.B.2c)
Offside Rear Suspension arm corroded but not seriously weakened (2.4.G.1)
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Windscreen has damage to an area less than a 10mm circle within zone 'A' (8.3.1a)
Items removed from driver's view prior to test
Brakes imbalanced across an axle (3.7.B.5b)
Offside Rear Anti-roll bar linkage has excessive play in a ball joint (2.4.G.2)
Nearside Rear Brake pad(s) wearing thin (3.5.1g)
Offside Rear Brake pad(s) wearing thin (3.5.1g)
How Reliable is the Mazda 6?
Based on 1,904,140 MOT tests across 159,651 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
SV55 HBP is a 2005 Mazda 6 in Silver with a 1,999cc petrol engine. This vehicle has been through 13 MOT tests with a personal pass rate of 69.2%.
Across all 2005 Mazda 6 models, the average MOT pass rate is 72.4% with a typical mileage of 77,324 miles. This particular vehicle has a lower pass rate than the average for its year, which may indicate maintenance issues worth investigating.
The most common reason a Mazda 6 fails its MOT is tyre tread depth below requirements of 1.6mm, accounting for 45,082 recorded failures. If you're considering buying SV55 HBP, it's worth having these areas checked by a mechanic before committing.
The Mazda 6 typically stays on UK roads for around 24 years. At 21 years old, this Mazda 6 is approaching the upper end of the typical lifespan for this model.
Frequently Asked Questions
How do I check the history of SV55 HBP?
You can check the full history of SV55 HBP by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was SV55 HBP registered?
SV55 HBP is a 2005 Mazda 6, first registered on 31 October 2005.
Is SV55 HBP safe to buy?
The MOT history for SV55 HBP shows 13 tests with a 69.2% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does SV55 HBP have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on SV55 HBP. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.