2008 Isuzu Rodeo

Nearside Front Brake hose has slight corrosion to ferrule (1.1.12 (f) (i))

Nearside Front Integral body structure or chassis corroded within 30cm of a mounting, but not seriously affecting overall security (6.2.2 (d) (i))

Nearside Front Integral body structure or chassis corroded within 30cm of a mounting, but not seriously affecting overall security (6.2.2 (d) (i))

Nearside Front Lower Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))

Nearside Front Suspension component mounting prescribed area is corroded but not considered excessive chassis, torsion bar mounting (5.3.6 (a) (i))

Nearside Front bumper is damaged

Nearside Rear Seat belt anchorage prescribed area is corroded but not considered excessive inner sill (7.1.1 (a) (i))

Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive chassis, spring mount (5.3.6 (a) (i))

Nearside Rear Towbar slightly corroded within 30cm of towbar mounting (6.1.6 (i) (i))

Nearside Rear Vehicle structure is corroded but structural rigidity is not significantly reduced chassis (6.1.1 (c) (i))

Offside Front Brake hose has slight corrosion to ferrule (1.1.12 (f) (i))

Offside Front Integral body structure or chassis corroded within 30cm of a mounting, but not seriously affecting overall security (6.2.2 (d) (i))

Offside Front Integral body structure or chassis corroded within 30cm of a mounting, but not seriously affecting overall security (6.2.2 (d) (i))

Offside Front Lower Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))

Offside Front Seat belt webbing slightly damaged or frayed (7.1.2 (b) (ii))

Offside Front Suspension component mounting prescribed area is corroded but not considered excessive chassis, torsion bar mounting (5.3.6 (a) (i))

Offside Rear Seat belt anchorage prescribed area is corroded but not considered excessive inner sill (7.1.1 (a) (i))

Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive chassis, spring mounting (5.3.6 (a) (i))

Offside Rear Towbar slightly corroded within 30cm of towbar mounting (6.1.6 (i) (i))

Offside Rear Vehicle structure is corroded but structural rigidity is not significantly reduced chassis (6.1.1 (c) (i))

rear bumper hanger corroded and insecure

Anti-lock braking system warning lamp indicates an ABS fault (1.6 (b))

Central Stop lamp(s) not working (4.3.1 (a) (ii))

Emissions not tested (8.2.2.2 (e))

Exhaust has a major leak of exhaust gases (6.1.2 (a))

Nearside Front Lower Suspension arm ball joint excessively worn (5.3.4 (a) (i))

Nearside Front Upper Suspension arm ball joint excessively worn (5.3.4 (a) (i))

Nearside Headlamp not working on dipped beam (4.1.1 (a) (ii))

Nearside Position lamp not working (4.2.1 (a))

Offside Front Lower Suspension arm ball joint excessively worn (5.3.4 (a) (i))

Offside Front Upper Suspension arm ball joint excessively worn (5.3.4 (a) (i))

Offside Track rod end ball joint has excessive play (2.1.3 (b) (i))

Parking brake efficiency below requirements (1.4.2 (a) (i))

Registration plate lamp inoperative in the case of a single lamp or all lamps (4.7.1 (b) (ii))

Nearside Front Body mounting fixing insecure, but overall security not significantly reduced corroded (6.2.2 (c) (i))

Nearside Front Brake hose has slight corrosion to ferrule (1.1.12 (f) (i))

Nearside Front Lower Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))

Nearside Front Suspension component mounting prescribed area is corroded but not considered excessive x member(torsion bar mounting) (5.3.6 (a) (i))

Nearside Front bumper damaged

Nearside Rear Leaf spring has slight wear in a shackle pin and/or bush (5.3.4 (a) (i))

Nearside Rear Suspension spring mounting prescribed area is corroded but not considered excessive chassis (5.3.6 (a) (i))

Offside Front Body mounting fixing insecure, but overall security not significantly reduced corroded (6.2.2 (c) (i))

Offside Front Brake hose has slight corrosion to ferrule (1.1.12 (f) (i))

Offside Front Lower Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))

Offside Front Suspension component mounting prescribed area is corroded but not considered excessive x member(torsion bar mounting) (5.3.6 (a) (i))

Offside Rear Suspension spring mounting prescribed area is corroded but not considered excessive chassis (5.3.6 (a) (i))

hand brake has excessive travel

reverse lights inop

chassis has all round corrosion

Nearside Front Brake pipe excessively corroded at flexible (3.6.B.2c)

Offside Front Brake pipe excessively corroded at flexible (3.6.B.2c)

Offside Front position lamp(s) not working (1.1.A.3b)

Nearside Front Brake pipe slightly corroded (3.6.B.2c)

Nearside Rear Brake pipe slightly corroded (3.6.B.2c)

Offside Rear Brake pipe slightly corroded (3.6.B.2c)

Brake pipe excessively corroded (3.6.B.2c)

Nearside Front Anti-roll bar rubber mounting deteriorated resulting in excessive movement (2.4.G.2)

Nearside Rear Leaf spring fractured (2.4.B.1a)

Offside Front Anti-roll bar rubber mounting deteriorated resulting in excessive movement (2.4.G.2)

Offside Front Front wheel bearing has excessive play (2.5.A.3c)

Offside Front Upper Suspension arm ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt (2.4.G.2)

Nearside Front Brake pipe slightly corroded (3.6.B.2c)

Nearside Rear Brake pipe slightly corroded (3.6.B.2c)

Offside Rear Brake pipe slightly corroded (3.6.B.2c)

Nearside Rear Leaf spring has a slightly deteriorated shackle pin rubber bush not resulting in excessive movement (2.4.B.2)

Offside Rear Leaf spring has a slightly deteriorated shackle pin rubber bush not resulting in excessive movement (2.4.B.2)

Nearside Rear Leaf spring has a slightly deteriorated shackle pin rubber bush not resulting in excessive movement (2.4.B.2)

Nearside Windscreen wiper does not clear the windscreen effectively (8.2.2)

Offside Rear Leaf spring has a slightly deteriorated shackle pin rubber bush not resulting in excessive movement (2.4.B.2)

Offside Front suspension has slight play in a lower suspension ball joint (2.5.B.1a)