2008 Toyota Aygo

Exhaust carbon monoxide content after 2nd fast idle exceeds manufacturer's specified limits (8.2.1.2 (a))

Nearside Front Anti-roll bar pin or bush excessively worn (5.3.4 (a) (i))

Nearside Rear Brake hose ferrule excessively corroded (1.1.12 (f) (i))

Nearside Rear Inner Seat belt anchorage prescribed area strength or continuity significantly reduced sill (7.1.1 (a) (i))

Nearside Rear Outer Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill (5.3.6 (a) (i))

Offside Rear Brake hose ferrule excessively corroded (1.1.12 (f) (i))

Offside Rear Brake pipe excessively corroded front to rear pipe (1.1.11 (c))

Offside Rear Inner Seat belt anchorage prescribed area strength or continuity significantly reduced sill (7.1.1 (a) (i))

Offside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength at mounting point (5.3.6 (a) (i))

Offside Rear Shock absorbers has a serious fluid leak (5.3.2 (b))

Front Brake disc worn, pitted or scored, but not seriously weakened both n/s and o/s (1.1.14 (a) (ii))

Nearside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Nearside Front Shock absorbers has slight external damage to the casing casing corroded (5.3.2 (b))

Nearside Rear Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Oil leak, but not excessive (8.4.1 (a) (i))

underbody corrosion

Nearside Front Suspension arm pin or bush excessively worn rear bush (5.3.4 (a) (i))

Nearside Rear Brake pipe excessively corroded (1.1.11 (c))

Nearside Rear Inner Subframe mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))

Offside Rear Inner Subframe mounting prescribed area excessively corroded significantly reducing structural strength and outer sill (5.3.6 (a) (i))

Parking brake only 18%

Offside Rear Shock absorbers has light misting of oil (5.3.2 (b))

Spare tyre defective soft ()

Nearside Rear Inner Subframe mounting prescribed area excessively corroded significantly reducing structural strength and outer sill and chassis (5.3.6 (a) (i))

Nearside Windscreen washer provides insufficient washer liquid (3.5 (a))

Offside Front Suspension arm pin or bush excessively worn rear bush (5.3.4 (a) (i))

Offside Rear Service brake effort inadequate at a wheel (1.2.1 (a) (i))

Parking brake efficiency below requirements (1.4.2 (a) (i))

Rear Brakes imbalanced across an axle Axle 2 (1.2.1 (b) (i))

Nearside Rear Brake pipe corroded, covered in grease or other material in front of hose (1.1.11 (c))

Offside Rear Shock absorbers has light misting of oil (5.3.2 (b))

Spare tyre defective soft ()

Offside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Offside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength outer sill (5.3.6 (a) (i))

Offside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Offside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Offside Front Brake pipe slightly corroded to rear (3.6.B.2c)

Front Service brake juddering severely (3.7.C.2)

Nearside Rear Mechanical brake component has restricted free movement binding (3.5.1k)

Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

Offside Front Brake pipe slightly corroded to rear (3.6.B.2c)

Nearside Front Tyre worn close to the legal limit (4.1.E.1)

Offside Front Tyre worn close to the legal limit (4.1.E.1)