MOT Status
ValidMileage
97,382 miSignificantly above average — investigate
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Nearside Front Shock absorbers has negligible damping effect (5.3.2 (d))
Parking brake efficiency below requirements (1.4.2 (a) (i))
Front Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))
Offside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Rear Brake disc worn, but not excessively (1.1.14 (a) (i))
Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))
Parking brake efficiency below requirements (1.4.2 (a) (i))
Front Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))
Nearside Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))
Offside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Rear Brake disc worn, but not excessively (1.1.14 (a) (i))
Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))
Nearside Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))
heavy surface corrosion on rear axle
parking brake efficiency only just met 16%
Nearside Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))
Battery insecure and likely to fall from carrier (4.13 (a) (ii))
Nearside Front Position lamp not working (4.2.1 (a) (ii))
Nearside Front Service brake excessively fluctuating (1.2.1 (e))
Offside Front Anti-roll bar linkage ball joint excessively worn (5.3.4 (a) (i))
Offside Front Position lamp not working (4.2.1 (a) (ii))
Nearside Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))
BONNET CABLE DAMAGED
Front Exhaust has a minor leak of exhaust gases (6.1.2 (a))
Nearside Front Suspension arm ball joint has slight play (5.3.4 (a) (i))
Nearside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Offside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Rear Coil spring corroded (5.3.1 (b) (i))
Rear Shock absorbers has slight external damage to the casing CORRODED (5.3.2 (b))
Rear Subframe mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Brake performance not tested (1.2.1 (g))
Nearside Rear Brake pipe connection leaking on a hydraulic braking system (1.1.11 (b) (ii)) DANGEROUS
BONNET CABLE DAMAGED
Front Exhaust has a minor leak of exhaust gases (6.1.2 (a))
Nearside Front Suspension arm ball joint has slight play (5.3.4 (a) (i))
Nearside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Offside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Rear Coil spring corroded (5.3.1 (b) (i))
Rear Shock absorbers has slight external damage to the casing CORRODED (5.3.2 (b))
Rear Subframe mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Nearside Front Suspension arm ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))
Offside Front Suspension arm ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))
Offside Sub-frame corroded and seriously weakened (5.3.3 (b) (i))
Parking brake efficiency below requirements (1.4.2 (a) (i))
Offside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Rear Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))
Nearside Front Headlamp not working on main beam (4.1.1 (a) (ii))
Offside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Rear Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))
Brake pipe corroded, covered in grease or other material both front to rears (1.1.11 (c))
Front Brake pipe corroded, covered in grease or other material both front to flexi joint (1.1.11 (c))
Nearside Front Service brake binding but not excessively (1.2.1 (f))
Brake pipe corroded, covered in grease or other material both front to rears (1.1.11 (c))
Front Brake pipe corroded, covered in grease or other material both front to flexi joint (1.1.11 (c))
Front Position lamp not working both front (4.2.1 (a))
Nearside Front Service brake binding but not excessively (1.2.1 (f))
Front Brakes imbalanced across an axle (3.7.B.5b)
Offside Front Anti-roll bar linkage has excessive play in a ball joint (2.4.G.2)
Offside Front Brake pad(s) less than 1.5 mm thick (3.5.1g)
Offside Front Tyre worn close to the legal limit (4.1.E.1)
both front tyres badly cracked
coil spring corroded 2 x rear (2.4.C.1b)
cut on nearside front tyre sidewall
front and rear brakes binding slightly
Nearside Windscreen wiper does not clear the windscreen effectively (8.2.2)
Offside Rear Tyre has a tear, caused by separation or partial failure of its structure (4.1.D.1b)
Nearside Front Mechanical brake component has restricted free movement (3.5.1k)
Offside Front Mechanical brake component has restricted free movement (3.5.1k)
Windscreen washer provides insufficient washer liquid (8.2.3)
N/S/F Tyre cracking badly
All tyres sidewalls cracked
How Reliable is the Hyundai I10?
Based on 2,829,935 MOT tests across 251,032 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
SV58 YTW is a 2008 Hyundai I10 in Red with a 1,248cc petrol engine. This vehicle has been through 27 MOT tests with a personal pass rate of 63%.
Across all 2008 Hyundai I10 models, the average MOT pass rate is 74.6% with a typical mileage of 47,534 miles. This particular vehicle has a lower pass rate than the average for its year, which may indicate maintenance issues worth investigating.
The most common reason a Hyundai I10 fails its MOT is tyre tread depth below requirements of 1.6mm, accounting for 15,951 recorded failures. If you're considering buying SV58 YTW, it's worth having these areas checked by a mechanic before committing.
The Hyundai I10 typically stays on UK roads for around 18 years. At 18 years old, this Hyundai I10 is approaching the upper end of the typical lifespan for this model.
Frequently Asked Questions
How do I check the history of SV58 YTW?
You can check the full history of SV58 YTW by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was SV58 YTW registered?
SV58 YTW is a 2008 Hyundai I10, first registered on 31 October 2008.
Is SV58 YTW safe to buy?
The MOT history for SV58 YTW shows 27 tests with a 63% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does SV58 YTW have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on SV58 YTW. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.