2009 Honda Accord

Exhaust has a minor leak of exhaust gases (6.1.2 (a))

Front Sub-frame is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Nearside Outer Integral body structure is corroded but structural rigidity is not significantly reduced sill. (6.1.1 (c) (i))

Nearside Rear Anti-roll bar linkage ball joint has slight play (5.3.4 (a) (i))

Offside Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Offside Outer Integral body structure is corroded but structural rigidity is not significantly reduced sill. (6.1.1 (c) (i))

Rear Sub-frame is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Nearside Outer Integral body structure is corroded but structural rigidity is not significantly reduced sill. (6.1.1 (c) (i))

Nearside Rear Anti-roll bar linkage ball joint has slight play (5.3.4 (a) (i))

Offside Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Offside Outer Integral body structure is corroded but structural rigidity is not significantly reduced sill. (6.1.1 (c) (i))

Rear Subframe mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Nearside Rear Anti-roll bar linkage ball joint has slight play (5.3.4 (a) (i))

advice on heavy under seal at front and rear axles suspension and underside all over

Nearside Front Windscreen wiper does not clear the windscreen effectively (3.4 (b) (ii))

Offside Front Windscreen wiper does not clear the windscreen effectively (3.4 (b) (ii))

Windscreen washer provides insufficient washer liquid (3.5 (a))

advice on heavy under seal at front and rear axles suspension and underside all over

Front Brake pad(s) less than 1.5 mm thick (1.1.13 (a) (ii))

Rear Brake pad(s) less than 1.5 mm thick (1.1.13 (a) (ii))

Nearside Rear Anti-roll bar linkage ball joint has slight play (5.3.4 (a) (i))

Nearside Front Anti-roll bar linkage ball joint excessively worn (5.3.4 (a) (i))

Offside Front Upper Suspension arm ball joint excessively worn (5.3.4 (a) (i))

Parking brake efficiency below requirements (1.4.2 (a) (i))

Nearside Rear Anti-roll bar linkage ball joint has slight play (5.3.4 (a) (i))

Nearside Rear Anti-roll bar ball joint has slight play (5.3.4 (a) (i))

exhaust leak at manifold area

front tyres worn at edges

Parking brake efficiency below requirements (1.4.2 (a) (i))

Offside Rear Inner Brake pad(s) less than 1.5 mm thick (1.1.13 (a) (ii)) DANGEROUS

Nearside Rear Anti-roll bar ball joint has slight play (5.3.4 (a) (i))

Rear Inner Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

exhaust leak at manifold area

front tyres worn at edges

Nearside Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Offside Rear Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Offside Rear Tyre obviously under inflated (5.2.3 (l))

Offside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Nearside Front Position lamp not working (4.2.1 (a))

Nearside Rear Brake hose excessively twisted (1.1.12 (b) (ii))

Offside Rear Brake hose excessively twisted (1.1.12 (b) (ii))

Offside Rear Coil spring fractured or broken (5.3.1 (b) (i))

Nearside Front Tyre has a cut in excess of the requirements deep enough to reach the ply or cords (4.1.D.1a)

Offside Front Anti-roll bar linkage fractured (2.4.G.1)

Nearside Rear Anti-roll bar linkage rubber bush deteriorated resulting in excessive movement d bush (2.4.G.2)

Offside Rear Anti-roll bar linkage rubber bush deteriorated resulting in excessive movement d-bush (2.4.G.2)

Offside Track rod end ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt (2.2.C.1c)

Offside rear brake binding (3.7.B.1)

Nearside Rear Road wheel with a slightly distorted bead rim (4.2.A.1a)

Front Brake pad(s) wearing thin (3.5.1g)

Nearside Front Road wheel slightly damaged (4.2.A.1a)

Offside Rear Tyre worn close to the legal limit (4.1.E.1)

n/s rear tyre wearing on inner edge