2002 Mercedes-benz Vito

Exhaust emissions exceed level of metered smoke for a turbo charged engine (8.2.2.2 (b))

Front Service brake excessively fluctuating (1.2.1 (e))

Headlamp aim too low both (4.1.2 (a))

Nearside Front Drive shaft joint excessively worn (6.1.7 (c) (i))

Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))

Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))

Offside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced wheelarch (6.1.1 (c) (i))

Registration plate lamp inoperative in the case of a single lamp or all lamps (4.7.1 (b) (ii))

Service brake efficiency below requirements (1.2.2 (a) (i))

Nearside Rear Inner Brake pad(s) less than 1.5 mm thick (1.1.13 (a) (ii)) DANGEROUS

Nearside Rear Tyre tread depth below requirements of 1.6mm (5.2.3 (e)) DANGEROUS

Parking brake efficiency less than 50% of the required value (1.4.2 (a) (ii)) DANGEROUS

Rear Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Rear Shock absorbers has slight external damage to the casing both (5.3.2 (b))

Exhaust emissions exceed level of metered smoke for a turbo charged engine (8.2.2.2 (b))

Exhaust system insecure (6.1.2 (a))

Front Brake disc significantly and obviously worn (1.1.14 (a) (i))

Horn not working (7.7 (a) (ii))

Nearside Front Outer Drive shaft joint excessively worn (6.1.7 (c) (i))

Nearside Headlamp aim too low (4.1.2 (a))

Nearside Registration plate lamp does not illuminate simultaneously with the position lamps (4.7.2 (a))

Nearside Suspension component mounting prescribed area excessively corroded significantly reducing structural strength middle chassiss (5.3.6 (a) (i))

Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))

Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis in wheelarch (5.3.6 (a) (i))

Offside Headlamp aim too low (4.1.2 (a))

Offside Parking brake inoperative on one side (1.4.1 (a))

Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))

Offside Registration plate lamp does not illuminate simultaneously with the position lamps (4.7.2 (a))

Parking brake efficiency less than 50% of the required value (1.4.2 (a) (ii)) DANGEROUS

Front Service brake fluctuating, but not excessively (1.2.1 (e))

Nearside Front Inner Drive shaft joint constant velocity boot severely deteriorated (6.1.7 (g) (i))

Nearside Rear Shock absorbers has slight external damage to the casing (5.3.2 (b))

Offside Rear Shock absorbers has slight external damage to the casing (5.3.2 (b))

Rear Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Rear Service brake fluctuating, but not excessively (1.2.1 (e))

excessive underside surface corrosion

Front Brake pipe slightly corroded to rear x2 (3.6.B.2c)

Nearside Front Brake pipe slightly corroded (3.6.B.2c)

Nearside Front constant velocity joint gaiter deteriorated, but preventing the ingress of dirt (2.5.C.1a)

Nearside Rear Shock absorber has slight corrosion to the casing (2.7.2a)

Offside Rear Shock absorber has slight corrosion to the casing (2.7.2a)

Exhaust emits an excessive level of metered smoke for a turbo charged engine (7.4.B.3b)

Nearside Front Anti-roll bar has excessive play in a pin/bush (2.4.G.2)

Nearside Front Suspension spring mounting prescribed area is excessively corroded chassiss (2.4.A.3)

Nearside Rear Suspension spring mounting prescribed area is excessively corroded chassiss (2.4.A.3)

Offside Front Anti-roll bar has excessive play in a pin/bush (2.4.G.2)

Offside Rear Suspension spring mounting prescribed area is excessively corroded chassiss (2.4.A.3)

Parking brake: efficiency below requirements (3.7.B.7)

Service brake: efficiency below requirements (3.7.B.7)

Front Brake pipe slightly corroded to rear x2 (3.6.B.2c)

Nearside Front Brake pipe slightly corroded (3.6.B.2c)

Nearside Rear Shock absorber has slight corrosion to the casing (2.7.2a)

Offside Rear Shock absorber has slight corrosion to the casing (2.7.2a)

Nearside Rear Shock absorber has slight corrosion to the casing (2.7.2a)

Offside Rear Shock absorber has slight corrosion to the casing (2.7.2a)

Rear Brake actuating linkage mounting prescribed area is corroded but not considered excessive x member (3.3.A.2)

Rear brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

slight bind n/s/r

Nearside Stop lamp not working (1.2.1b)

Nearside Track rod end ball joint has excessive play (2.2.B.1f)

Offside Rear coil spring fractured (2.4.C.1a)

Nearside Rear Shock absorber has slight corrosion to the casing (2.7.2a)

Offside Rear Shock absorber has slight corrosion to the casing (2.7.2a)

Rear Brake actuating linkage mounting prescribed area is corroded but not considered excessive x member (3.3.A.2)

Rear brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

slight bind n/s/r

Offside Rear Tyre worn close to the legal limit (4.1.E.1)

Both inner and outer sills corroded

Nearside Front Brake pipe slightly corroded (3.6.B.2c)

Power steering pipe(s) or hose(s) slightly corroded (2.3.2)

Windscreen has damage to an area less than a 40mm circle outside zone 'A' (8.3.1d)

Nearside Front Brake pipe slightly corroded (3.6.B.2c)

Nearside Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

Offside Front Anti-roll bar ball joint dust cover deteriorated, but preventing the ingress of dirt (2.4.G.2)

Offside Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

Power steering pipe(s) or hose(s) slightly corroded (2.3.2)

crack in windscreen

Brake pipe slightly corroded (3.6.B.2c)

Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

Front constant velocity joint gaiter deteriorated, but preventing the ingress of dirt (2.5.C.1a)

Front tyres worn on edges

Rear shock absorber dust covers corroded

Surface corrosion to underside & sills

Shock absorber has slight corrosion to the casing (2.7.2a)

front bumper brackets corroded

slam panel corroded

Nearside Front Brake hose excessively deteriorated (3.6.B.4d)

Offside Front Brake hose excessively deteriorated (3.6.B.4d)

Exhaust has a part missing (7.1.1a)

Exhaust tailpipe not capable of allowing the emission probe to be inserted (7.4.B.1)

Front Exhaust has a major leak of exhaust gases (7.1.2)

Nearside Front Exhaust mounting missing (7.1.1b)

Nearside Front Windscreen wiper does not clear the windscreen effectively (8.2.2)

Offside Front Windscreen wiper does not clear the windscreen effectively (8.2.2)

Rear Brake load sensing valve linkage seized (3.6.E.3)

Rear Exhaust has a major leak of exhaust gases (7.1.2)

Centre exhaust heat shied corroded and fouling ehaust

Nearside Front Brake pad(s) wearing thin (3.5.1g)

Nearside Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

Offside Front Brake pad(s) wearing thin (3.5.1g)

Offside Front Brake pipe slightly corroded (3.6.B.2c)

Offside Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)