2007 Subaru Impreza

Heavy surface corrosion and previous welding repairs to rear of vehicle

Anti-lock braking system warning lamp indicates an ABS fault (1.6 (b))

Heavy surface corrosion and previous welding repairs to rear of vehicle

Exhaust Lambda reading after 2nd fast idle outside specified limits (8.2.1.2 (c))

Exhaust carbon monoxide content after 2nd fast idle exceeds manufacturer's specified limits (8.2.1.2 (a))

Exhaust hydrocarbon content after 2nd fast idle exceeds default limits (8.2.1.2 (b))

Exhaust hydrocarbon content after 2nd fast idle exceeds manufacturer's specified limits (8.2.1.2 (a))

Nearside Front Seat belt anchorage prescribed area strength or continuity significantly reduced inner sill (7.1.1 (a) (i))

Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Chassis rail (5.3.6 (a) (i))

Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Inner sill Rear Axle mount. (5.3.6 (a) (i))

Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Chassis rail (5.3.6 (a) (i))

Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Floor pan (5.3.6 (a) (i))

Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Inner sill Rear axle mount (5.3.6 (a) (i))

Corrosion coil springs

Corrosion to rear roll bar mounts

Corrosion to shock absorber bodies

Exhaust mounting defective Rear box n/s mount missing (6.1.2 (a))

Fuel filler neck rotten

Items removed from driver's view prior to test ()

Offside Front Inner Drive shaft joint constant velocity boot severely deteriorated (6.1.7 (g) (i))

Rear Brake disc worn, but not excessively (1.1.14 (a) (i))

Rear subframe heavily corroded

Rear suspension arms corroded

Suspension component mounting prescribed area is corroded but not considered excessive Both rear chassis rails heavily corroded (5.3.6 (a) (i))

Suspension component mounting repair covered in underseal Various repairs (5.3.6 (a) (i))

plastic sill covers fitted preventing full examination of vehicle

Axle support beam heavily corroded

Corrosion to both chassis rails

Corrosion to inner and outer sill where they deformed from lifting

Front shock bodies corroded

Fuel filler neck corroded

Heavy corrosion to rear subframe

Stop lamp(s) non-obligatory stop lamp not working Centre brake light not working (4.3.1 (a) (ii))

Strong smell of petrol under vehicle

corrosion to floor pan

corrosion to n/s inner sill various

corrosion to suspension arms rear

plastic sill covers preventing full examination of vehicle

Exhaust carbon monoxide content after 2nd fast idle exceeds default limits (8.2.1.2 (b))

Exhaust has a major leak of exhaust gases Blow around 2nd Cat (6.1.2 (a))

Nearside Rear Shock absorbers has a serious fluid leak (5.3.2 (b))

Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner wheel arch. (5.3.6 (a) (i))

Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength upper suspension turret (5.3.6 (a) (i))

Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner wheel arch (5.3.6 (a) (i))

Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength upper suspension turret (5.3.6 (a) (i))

Offside Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner sill rear. (5.3.6 (a) (i))

Windscreen washer provides insufficient washer liquid (3.5 (a))

Axle support beam heavily corroded

Corrosion to both chassis rails

Corrosion to inner and outer sill where they deformed from lifting

Front shock bodies corroded

Fuel filler neck corroded

Heavy corrosion to rear subframe

Offside Front Nail in tyre ()

Parking brake requires adjustment

Stop lamp(s) non-obligatory stop lamp not working Centre brake light not working (4.3.1 (a) (ii))

Strong smell of petrol under vehicle

corrosion to floor pan

corrosion to n/s inner sill various

corrosion to suspension arms rear

plastic sill covers preventing full examination of vehicle

Corrosion to front subframe

Corrosion to rear chassis

Corrosion to rear suspension arms and connecting arms

Heavy corrosion to rear subframe

Heavy corrosion to suspension arms

Engine MIL inoperative or indicates a malfunction (8.2.1.2 (h))

Headlamp aim too low Both fronts self levelling broken off front and rear (4.1.2 (a))

Headlamp levelling device inoperative Front and rear height sensors broken off (4.1.5 (a))

Nearside Front Position lamp not working (4.2.1 (a) (ii))

Nearside Rear Macpherson strut mounting corroded and seriously weakened (5.3.3 (b) (i))

Offside Rear Macpherson strut mounting corroded and seriously weakened (5.3.3 (b) (i))

Offside Rear Wheel bearing has excessive play (5.1.3 (a) (i))

Offside Rear Suspension component mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected inner Sill and wheel arch rotted out (5.3.6 (a) (ii)) DANGEROUS

Corrosion to front subframe

Corrosion to rear chassis

Corrosion to rear suspension arms and connecting arms

Heavy corrosion to rear subframe

Heavy corrosion to suspension arms

Front Brake pad(s) wearing thin (1.1.13 (a) (ii))

Part of offside tail light in-op

Rear Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Nearside Front Tyre not fitted in accordance with side wall instructions (5.2.3 (i))

Nearside Rear Tyre not fitted in accordance with side wall instructions (5.2.3 (i))

Offside Front Tyre not fitted in accordance with side wall instructions (5.2.3 (i))

Offside Rear Tyre not fitted in accordance with side wall instructions (5.2.3 (i))

Brake pipe corroded, covered in grease or other material Both front to rear (1.1.11 (c))

Front Brake pad(s) wearing thin (1.1.13 (a) (ii))

Nearside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Part of offside tail light in-op

Rear Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Brake pipe slightly corroded Both front to rear (3.6.B.2c)

Offside Rear position lamp(s) has light sources not illuminating, but not more than 50% (1.1.A.3b)

Nearside Front Brake pipe slightly corroded to rear (3.6.B.2c)

Nearside Rear wheel bearing has slight play (2.6.2)

Offside Front Brake pipe slightly corroded to rear (3.6.B.2c)

Brake pipes coated and greased

Items removed from driver's view prior to test

Nearside Headlamp aim too high (1.8)

Offside Headlamp aim too high (1.8)

Stop lamp has less than 50% of the light sources illuminating (1.2.1b)

Brake pipes coated and greased

Items removed from driver's view prior to test

Front Anti-roll bar has slight play in a pin/bush (2.4.G.2)

Nearside Rear Brake pipe slightly corroded (3.6.B.2c)

Offside Rear Brake pipe slightly corroded (3.6.B.2c)

Centre Rear Statutory seat belt missing (5.1.1)

Nearside Headlamp aim too high (1.8)

Nearside Registration plate lamp not working (1.1.C.1d)

Offside Headlamp aim too high (1.8)

Offside Registration plate lamp not working (1.1.C.1d)

Front Anti-roll bar has slight play in a pin/bush (2.4.G.2)

Nearside Rear Brake pipe slightly corroded (3.6.B.2c)

Offside Rear Brake pipe slightly corroded (3.6.B.2c)

Registration plate lamp not working (1.1.C.1d)

Noise from rear suspension when driving

Nearside Front Anti-roll bar linkage has excessive play in a ball joint (2.4.G.2)

Offside front brake binding (3.7.B.1)

Rear o/s suspension sensor linkage broken

Offside Registration plate lamp not working (1.1.C.1d)

Offside Front Headlamp aim too low (1.8)