2008 Toyota Aygo

Anti-roll bar linkage pin or bush worn but not resulting in excessive movement Both front (5.3.4 (a) (i))

Brake pipe corroded, covered in grease or other material Going to offside front flexi (1.1.11 (c))

Front Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Rear axle corroded

Seat belt anchorage prescribed area is corroded but not considered excessive Both inner sills (7.1.1 (a) (i))

Suspension component mounting prescribed area is corroded but not considered excessive Both inner sills (5.3.6 (a) (i))

Suspension component mounting prescribed area is corroded but not considered excessive Both rear floors (5.3.6 (a) (i))

Front Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Nearside Front Suspension arm pin or bush worn but not resulting in excessive movement back (5.3.4 (a) (i))

Nearside Inner sill

Offside Front Suspension arm pin or bush worn but not resulting in excessive movement back (5.3.4 (a) (i))

Offside Inner sill

Rear Sub-frame corroded but not seriously weakened axle (5.3.3 (b) (i))

Nearside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength near to trailing /axle bush (5.3.6 (a) (i))

Nearside Rear Outer Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill (5.3.6 (a) (i))

Offside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength near to trailing /axle bush (5.3.6 (a) (i))

Offside Rear Outer Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill (5.3.6 (a) (i))

Offside Rear Stop lamp(s) not working (4.3.1 (a) (ii))

Rear Registration plate lamp inoperative in the case of a single lamp or all lamps (4.7.1 (b) (ii))

Front Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Nearside Front Suspension arm pin or bush worn but not resulting in excessive movement back (5.3.4 (a) (i))

Nearside Inner sill

Offside Front Suspension arm pin or bush worn but not resulting in excessive movement back (5.3.4 (a) (i))

Offside Inner sill

Rear Sub-frame corroded but not seriously weakened axle (5.3.3 (b) (i))

Brake lever has insufficient reserve travel (1.1.2 (a))

Front Windscreen wiper does not clear the windscreen effectively (3.4 (b) (ii))

Nearside Front Road wheel fixing missing (5.2.1 (a) (i))

Nearside Rear Coil spring fractured or broken (5.3.1 (b) (i))

Nearside Rear Service brake excessively binding (1.2.1 (f))

Nearside Rear Shock absorbers damaged to the extent that it does not function (5.3.2 (b))

Offside Rear Coil spring fractured or broken (5.3.1 (b) (i))

Offside Rear Shock absorbers damaged to the extent that it does not function (5.3.2 (b))

Parking brake efficiency below requirements (1.4.2 (a) (i))

Vehicle structure is corroded but structural rigidity is not significantly reduced all suspension parts corroded (6.1.1 (c) (i))

Front Lower Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Nearside Suspension component mounting prescribed area is corroded but not considered excessive inner sill (5.3.6 (a) (i))

Offside Front Brake pipe corroded, covered in grease or other material leading into flexi brake hose (1.1.11 (c))

Rear Suspension component mounting prescribed area is corroded but not considered excessive nearside and offside (5.3.6 (a) (i))

Nearside Front Road wheel fixing missing and rear (5.2.1 (a) (i))

Offside Front Road wheel fixing missing and rear (5.2.1 (a) (i))

Offside Inner Seat belt anchorage prescribed area strength or continuity significantly reduced sill (7.1.1 (a) (i))

Offside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill (5.3.6 (a) (i))

Offside Rear Outer Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill (5.3.6 (a) (i))

Front Lower Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Nearside Suspension component mounting prescribed area is corroded but not considered excessive inner sill (5.3.6 (a) (i))

Offside Front Brake pipe corroded, covered in grease or other material leading into flexi brake hose (1.1.11 (c))

Rear Suspension component mounting prescribed area is corroded but not considered excessive nearside and offside (5.3.6 (a) (i))

Nearside Front Suspension arm pin or bush worn but not resulting in excessive movement wishbone rear bush (5.3.4 (a) (i))

Offside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))

surface corrosion

Exhaust has a minor leak of exhaust gases (6.1.2 (a))

Front Brake disc in such a condition that it is seriously weakened (1.1.14 (a) (ii)) DANGEROUS

Front Brake pad(s) less than 1.5 mm thick (1.1.13 (a) (ii)) DANGEROUS

Exhaust has a minor leak of exhaust gases (6.1.2 (a))

Nearside Front Brake pad(s) wearing thin (1.1.13 (a) (ii))

Offside Front Brake pad(s) wearing thin (1.1.13 (a) (ii))

Offside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Offside Front Tyre worn close to the legal limit inner edge (4.1.E.1)

Offside Rear Tyre worn close to the legal limit (4.1.E.1)

various brake pipes starting to corrode/surface rust

Nearside Rear Tyre worn close to the legal limit (4.1.E.1)

Nearside Rear Tyre worn close to the legal limit (4.1.E.1)

Offside Rear Tyre worn close to the legal limit (4.1.E.1)

Offside rear brake binding (3.7.B.1)

Rear Exhaust system not adequately supported (7.1.1)

Windscreen washer provides insufficient washer liquid (8.2.3)

Nearside Rear Tyre worn close to the legal limit (4.1.E.1)

Offside Rear Tyre worn close to the legal limit (4.1.E.1)

Nearside Front Tyre not fitted in accordance with side wall instructions (4.1.D.1f)

Offside Front Tyre not fitted in accordance with side wall instructions (4.1.D.1f)