2012 Fiat Punto

Front Direction indicator slightly discoloured both sides (4.4.3 (a))

Front Integral body structure is corroded but structural rigidity is not significantly reduced jacking points both sides (6.1.1 (c) (i))

Front Registration plate deteriorated but not likely to be misread (0.1 (b))

Front Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Nearside Rear Hydraulic brake cylinder corroded but not seriously weakened (1.1.16 (d) (i))

Nearside Rear Inner Integral body structure is corroded but structural rigidity is not significantly reduced sill and surrounding area (6.1.1 (c) (i))

Nearside Rear Inner Road wheel slightly distorted (5.2.2 (c) (i))

Nearside Rear Shock absorbers has light misting of oil (5.3.2 (b))

Offside Front Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))

Offside Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Offside Rear Hydraulic brake cylinder corroded but not seriously weakened (1.1.16 (d) (i))

Offside Rear Inner Integral body structure is corroded but structural rigidity is not significantly reduced sill and surrounding area (6.1.1 (c) (i))

Outer Integral body structure is corroded but structural rigidity is not significantly reduced sills both sides (6.1.1 (c) (i))

Rear Suspension arm corroded but not seriously weakened axle main structure (5.3.3 (b) (i))

Rear Vehicle structure is corroded but structural rigidity is not significantly reduced both sides (6.1.1 (c) (i))

Emissions unable to be completed excessive leak (8.2.1.2 (d))

Front Tyre(s) of different sizes are fitted on the same axle. (5.2.3 (b))

Offside Front Suspension arm ball joint excessively worn (5.3.4 (a) (i))

Offside Stop lamp(s) not working (4.3.1 (a) (ii))

Rear Tyre(s) of different sizes are fitted on the same axle. (5.2.3 (b))

Nearside Front Tyre tread depth below requirements of 1.6mm (5.2.3 (e)) DANGEROUS

Front Direction indicator slightly discoloured both sides (4.4.3 (a))

Front Integral body structure is corroded but structural rigidity is not significantly reduced jacking points both sides (6.1.1 (c) (i))

Front Registration plate deteriorated but not likely to be misread (0.1 (b))

Front Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Nearside Rear Hydraulic brake cylinder corroded but not seriously weakened (1.1.16 (d) (i))

Nearside Rear Inner Integral body structure is corroded but structural rigidity is not significantly reduced sill and surrounding area (6.1.1 (c) (i))

Nearside Rear Inner Road wheel slightly distorted (5.2.2 (c) (i))

Nearside Rear Shock absorbers has light misting of oil (5.3.2 (b))

Offside Front Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))

Offside Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Offside Rear Hydraulic brake cylinder corroded but not seriously weakened (1.1.16 (d) (i))

Offside Rear Inner Integral body structure is corroded but structural rigidity is not significantly reduced sill and surrounding area (6.1.1 (c) (i))

Outer Integral body structure is corroded but structural rigidity is not significantly reduced sills both sides (6.1.1 (c) (i))

Rear Suspension arm corroded but not seriously weakened axle main structure (5.3.3 (b) (i))

Rear Vehicle structure is corroded but structural rigidity is not significantly reduced both sides (6.1.1 (c) (i))

Exhaust has a minor leak of exhaust gases (6.1.2 (a))

Offside Front Lower Suspension arm ball joint has slight play (5.3.4 (a) (i))

Windscreen damaged but not adversely affecting driver's view (3.2 (a) (i))

Offside Front Suspension arm pin or bush worn but not resulting in excessive movement rear bush (5.3.4 (a) (i))

Exhaust Lambda reading after 2nd fast idle outside specified limits (8.2.1.2 (c))

Exhaust has a major leak of exhaust gases (6.1.2 (a))

Nearside Front Position lamp not working (4.2.1 (a) (ii))

Offside Parking brake inoperative on one side (1.4.1 (a))

Parking brake efficiency below requirements (1.4.2 (a) (i))

Offside Front Suspension arm pin or bush worn but not resulting in excessive movement rear bush (5.3.4 (a) (i))

Offside Front Anti-roll bar linkage ball joint has slight play (5.3.4 (a) (i))

Exhaust Lambda reading after 2nd fast idle outside specified limits (8.2.1.2 (c))

Exhaust has a major leak of exhaust gases (6.1.2 (a))

Offside Parking brake inoperative on one side (1.4.1 (a))

Offside Rear Shock absorbers has a serious fluid leak (5.3.2 (b))

Parking brake efficiency below requirements (1.4.2 (a) (i))

Registration plate lamp inoperative in the case of a single lamp or all lamps (4.7.1 (b) (ii))

Offside Front Anti-roll bar linkage ball joint has slight play (5.3.4 (a) (i))

Oil leak, but not excessive (8.4.1 (a) (i))

Exhaust Lambda reading after 2nd fast idle outside specified limits (8.2.1.2 (c))

Nearside Front Coil spring fractured or broken (5.3.1 (b) (i))

Nearside Front Suspension arm pin or bush excessively worn rear bush (5.3.4 (a) (i))

Nearside Front Track rod end ball joint has excessive play (2.1.3 (b) (i))

Offside Front Coil spring fractured or broken (5.3.1 (b) (i))

Exhaust has a minor leak of exhaust gases (6.1.2 (a))

Oil leak, but not excessive (8.4.1 (a) (i))

Front Brake disc significantly and obviously worn (1.1.14 (a) (i))

Offside Front Service brake binding but not excessively (1.2.1 (f))

Exhaust has a minor leak of exhaust gases rear silencer (7.1.2)

Offside Front coil spring broken (2.4.C.1a)

Exhaust has a minor leak of exhaust gases rear silencer (7.1.2)

Oil leak gearbox

Rear Exhaust has a minor leak of exhaust gases silencer (7.1.2)

Nearside Front Brake pad(s) wearing thin (3.5.1g)

Nearside Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

Offside Front Brake pad(s) wearing thin (3.5.1g)

Offside Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

Rear exhaust section slightly corroded

radiator support housing damaged

Brake pedal anti-slip provision missing (3.3.A.1b)

radiator support housing damaged