2012 Toyota Hilux

Power steering component has slight seepage from a component (2.1.5 (a))

Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

general corrosion of suspension components

Parking brake efficiency below requirements (1.4.2 (a) (i))

Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

general corrosion of suspension components

Nearside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Nearside Rear Vehicle structure is corroded but structural rigidity is not significantly reduced spring mounting corroded (6.1.1 (c) (i))

Exhaust has a major leak of exhaust gases back box holed (6.1.2 (a))

Offside Front Steering rack gaiter missing or no longer prevents the ingress of dirt (2.1.3 (g) (ii))

Offside Front Tyre tread depth below requirements of 1.6mm (5.2.3 (e)) DANGEROUS

Nearside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Nearside Rear Vehicle structure is corroded but structural rigidity is not significantly reduced spring mounting corroded (6.1.1 (c) (i))

Offside Front Play in steering rack inner joint(s) ()

Rear Registration plate lamp insecure both lamps (4.7.1 (c) (i))

Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Anti-lock braking system warning lamp indicates an ABS fault (1.6 (b))

Brake performance not tested (1.2.1 (g))

Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength spring mount, also fractured (5.3.6 (a) (i))

Offside Front Play in steering rack inner joint(s) ()

Rear Registration plate lamp insecure both lamps (4.7.1 (c) (i))

Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Front Brake pad(s) wearing thin (1.1.13 (a) (ii))

Front Windscreen wiper does not clear the windscreen effectively x2 (3.4 (b) (ii))

Offside Rear Service brake excessively binding (1.2.1 (f))

Parking brake lever has excessive movement indicating incorrect adjustment (1.1.6 (c))

Windscreen washer not working (3.5 (a))

Front Brake pad(s) wearing thin (1.1.13 (a) (ii))

Nearside Rear Service brake binding but not excessively (1.2.1 (f))

Offside Front Play in steering rack inner joint(s) ()

Nearside Front Coil spring fractured or broken (5.3.1 (b) (i))

Parking brake lever has excessive movement indicating incorrect adjustment (1.1.6 (c))

Nearside Front Tyre tread depth below requirements of 1.6mm (5.2.3 (e)) DANGEROUS

Nearside Rear Tyre tread depth below requirements of 1.6mm (5.2.3 (e)) DANGEROUS

Offside Front Tyre tread depth below requirements of 1.6mm (5.2.3 (e)) DANGEROUS

Offside Front Play in steering rack inner joint(s) ()

Nearside Front Brake pipe excessively corroded between caliper and flexible hose (1.1.11 (c))

Nearside Rear Brake pipe excessively corroded (1.1.11 (c))

Offside Front Brake pipe excessively corroded between caliper and flexible hose (1.1.11 (c))

Offside Front Coil spring fractured or broken (5.3.1 (b) (i))

Offside Rear Brake pipe excessively corroded (1.1.11 (c))

Nearside Rear Mechanical brake component has restricted free movement (3.5.1k)

Rear Brake pipe excessively corroded from load valve to flexable hose (3.6.B.2c)

Windscreen wiper does not clear the windscreen effectively both front wiper blades (8.2.2)

Brake pipe leaking from front to rear brake pipe at load valve (3.6.A.1) DANGEROUS

Nearside Rear Brake pipe slightly corroded Brake pipe between load valve and rear flexible corroded (3.6.B.2c)

Nearside Rear Brake pipe slightly corroded Front to rear pipe corroded at end connecting to load valve (3.6.B.2c)

Nearside Rear Brake pipe slightly corroded front to rear at compinsater (3.6.B.2c)