2004 Mercedes-benz Clk

Nearside Front Anti-roll bar ball joint has slight play (5.3.4 (a) (i))

Nearside Windscreen damaged but not adversely affecting driver's view (3.2 (a) (i))

Nearside Front Anti-roll bar ball joint has slight play (5.3.4 (a) (i))

Nearside Rear Position lamp not working (4.2.1 (a) (ii))

Nearside Windscreen damaged but not adversely affecting driver's view (3.2 (a) (i))

Nearside Front Anti-roll bar linkage pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

one wheel bolt missing from each road wheel

Nearside Front Anti-roll bar linkage pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Nearside Position lamp not working (4.2.1 (a) (ii))

Windscreen washer not working (3.5 (a))

one wheel bolt missing from each road wheel

Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

NEARSIDE BODY SUPPORT INSECURE

Nearside Headlamp light intensity severely reduced (4.1.4 (a))

Offside Front Lower Suspension arm ball joint excessively worn FRONT (5.3.4 (a) (i))

Offside Headlamp light intensity severely reduced (4.1.4 (a))

Parking brake lever defective so that it cannot be satisfactorily operated (1.1.6 (d))

NEARSIDE BODY SUPPORT INSECURE

Front Headlamp deteriorated but light output not reduced both (1.7.5a)

Offside Front Anti-roll bar linkage ball joint dust cover damaged, but preventing the ingress of dirt (2.4.G.2)

Windscreen has damage to an area less than a 40mm circle outside zone 'A' (8.3.1d)

undertrays and engine covers fitted obsecuring some components

Front both tyres wearing on edges

Nearside Front Anti-roll bar linkage ball joint dust cover damaged, but preventing the ingress of dirt (2.4.G.2)

Offside Front Anti-roll bar linkage ball joint dust cover damaged, but preventing the ingress of dirt (2.4.G.2)

exhaust centre pipe mount broken but still supported

under trays and engine covers fitted

Nearside Rear Outer Brake pad(s) less than 1.5 mm thick (3.5.1g)

Offside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Front both tyres wearing on edges

Nearside Front Anti-roll bar linkage ball joint dust cover damaged, but preventing the ingress of dirt (2.4.G.2)

Offside Front Anti-roll bar linkage ball joint dust cover damaged, but preventing the ingress of dirt (2.4.G.2)

exhaust centre pipe mount broken but still supported

under trays and engine covers fitted

Nearside Front coil spring broken (2.4.C.1a)

Nearside Rear Brake hose twisted (3.6.B.4c)

Nearside Rear Tyre has a bulge, caused by separation or partial failure of its structure (4.1.D.1b) DANGEROUS

Rear Service brake: service brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.7)

parking brake relese borderline pass

rear brakes seem very close to minimum thickness benfit given to prsenter must be checked very soon

Nearside Rear Tyre worn close to the legal limit (4.1.E.1)

Under-trays fitted obscuring some underside components

Nearside Rear brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

Offside Front Front wheel bearing has slight play (2.5.A.3c)

Nearside Front Suspension arm has excessive play in a ball joint (2.4.G.2)

Nearside Front Suspension arm has excessive play in a pin/bush (2.4.G.2)

Nearside Front Tyre has a tear, caused by separation or partial failure of its structure (4.1.D.1b)

Offside Front Suspension arm ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt (2.4.G.2)

Offside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Rear Brake pad(s) less than 1.5 mm thick (3.5.1g)

front brake application uneven (3.7.B.2)

Nearside Rear brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

Offside Front Front wheel bearing has slight play (2.5.A.3c)

Offside Rear Tyre worn close to the legal limit (4.1.E.1)

Nearside Rear Tyre has a cut in excess of the requirements deep enough to reach the ply or cords (4.1.D.1a)

Offside Rear Tyre worn close to the legal limit (4.1.E.1)