2006 Toyota Aygo

Exhaust has a minor leak of exhaust gases (6.1.2 (a))

Front Anti-roll bar ball joint dust cover severely deteriorated both sides (5.3.4 (b) (i))

Front Headlamp has a product on the lens but not seriously reducing light output both sides (4.1.4 (b))

Front Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Nearside Front Suspension arm ball joint dust cover severely deteriorated (5.3.4 (b) (i))

Nearside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Nearside Rear Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Nearside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Nearside Rear inner and outer sill covered heavily with underseal

Offside Front Seat belt webbing slightly damaged or frayed (7.1.2 (b))

Offside Rear Outer sill covered heavily with underseal

both rear and front bumper secured with tape

rear crash bar corroded

traces of filler found

underbody and suspension components corroded

Nearside Front Headlamp has a product on the lens so that the light output is severely reduced (4.1.4 (b))

Nearside Front Lower Suspension arm ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))

Nearside Front Position lamp not working sidelight (4.2.1 (a) (ii))

Nearside Rear Upper Subframe mounting prescribed area excessively corroded significantly reducing structural strength inner and outer sills holed (5.3.6 (a) (i))

Offside Front Bumper insecure (6.1.4 (a) (i))

Offside Front Headlamp aim projected beam image is obviously incorrect lens and bulb issue (4.1.2 (c))

Offside Front Headlamp has a product on the lens so that the light output is severely reduced (4.1.4 (b))

Offside Front Position lamp not working sidelight (4.2.1 (a) (ii))

Offside Rear Parking brake inoperative on one side (1.4.1 (a))

Offside Rear fog lamp not working (4.5.1 (a) (ii))

Parking brake efficiency below requirements (1.4.2 (a) (i))

Rear Bumper likely to become detached crash bar corroded/insecure (6.1.4 (a) (ii)) DANGEROUS

Nearside Front Nail in tyre leaking ()

Nearside Front Tyre worn close to legal limit/worn on edge plus sidewall damage (5.2.3 (e))

Nearside Rear Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Nearside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Offside Front Seat belt webbing slightly damaged or frayed (7.1.2 (b))

Rear Exhaust noisy (8.1.1 (a))

Rear Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Rear Coil spring corroded both sides (5.3.1 (b) (i))

general under body corroded but not excessive

Nearside Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Offside Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Nearside Rear Suspension component mounting prescribed area excessively damaged significantly reducing structural strength outer sill (5.3.6 (a) (i))

Nearside Rear Suspension component mounting prescribed area so inadequately repaired that control of the vehicle is likely to be adversely affected outer sill( body filler not accepted, only continues weld ). (5.3.6 (a) (ii)) DANGEROUS

Offside Rear Suspension component mounting prescribed area so inadequately repaired that control of the vehicle is likely to be adversely affected outer sill(body filler not accepted, only continues weld ). (5.3.6 (a) (ii)) DANGEROUS

Nearside Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Offside Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Headlamp aim projected beam image is obviously incorrect Headlamp worn (4.1.2 (c))

Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Outer sill (5.3.6 (a) (i))

Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Outer sill (5.3.6 (a) (i))

Windscreen washer not working (3.5 (a))

Offside Front Suspension component ball joint likely to become detached Locking device missing (5.3.4 (a) (ii)) DANGEROUS

Nearside Rear Outer Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting sill (6.2.2 (d) (i))

Offside Rear Outer Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting sill (6.2.2 (d) (i))

Nearside Rear Axle swivel pins and bushes swivel pin and/or bush slightly worn (5.1.2 (b) (i))

Offside Rear Axle swivel pins and bushes swivel pin and/or bush slightly worn (5.1.2 (b) (i))

Sub-frame is corroded but structural rigidity is not significantly reduced front and rear (6.1.1 (c) (i))

Nearside Front Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))

Nearside Parking brake inoperative on one side (1.4.1 (a))

Offside Front Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))

Offside Front Position lamp not working (4.2.1 (a) (ii))

Parking brake efficiency below requirements (1.4.2 (a) (i))

Sub-frame is corroded but structural rigidity is not significantly reduced front and rear (6.1.1 (c) (i))

corrosion to rear beam axle

front subframe corroded

Front SUBFRAME SLIGHTLY CORRODED

Rear AXIL CORRODED

Front Subframe mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Nearside Front Anti-roll bar linkage pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Nearside Rear Coil spring corroded (5.3.1 (b) (i))

Nearside Rear Upper Integral body structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Offside Front Anti-roll bar linkage pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Offside Front Headlamp lens slightly defective (4.1.1 (b) (i))

Offside Front Shock absorbers has slight external damage to the casing corroded (5.3.2 (b))

Offside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Offside Rear Coil spring corroded (5.3.1 (b) (i))

Offside Rear Upper Integral body structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Rear Subframe mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Nearside Front Lower Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Nearside Front Road wheel with a slightly distorted bead rim (4.2.A.1a)

Nearside Front Tyre worn close to the legal limit 3mm (4.1.E.1)

Nearside Rear Road wheel with a slightly distorted bead rim (4.2.A.1a)

Offside Front Lower Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Offside Headlamp deteriorated but light output not reduced (1.7.5a)

brake pipes coated with grease

nearside front tyre has micro cracking on sidewalls

Exhaust has a minor leak of exhaust gases (7.1.2)

Items removed from driver's view prior to test

Nearside Front Road wheel with a slightly distorted bead rim (4.2.A.1a)

Offside Front Tyre worn close to the legal limit (4.1.E.1)

Offside Rear Valve stem slightly damaged (4.1.D.1e)

brake pipes coated with grease

Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

near side front tyre has a cut in side wall