MOT Status
ExpiredMileage
106,638 miSignificantly above average — investigate
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Driver's airbag obviously inoperative (7.1.5 (c))
Engine MIL inoperative or indicates a malfunction (8.2.1.2 (h))
Headlamp aim too low both sides (4.1.2 (a))
Nearside Front Position lamp not working (4.2.1 (a) (ii))
Nearside Rear Shock absorbers has a serious fluid leak (5.3.2 (b))
Rear Vehicle structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting both sides inner and outer sill (6.2.2 (d) (i))
Registration plate lamp does not illuminate simultaneously with the position lamps (4.7.2 (a))
Central Stop lamp(s) light intensity obviously reduced (4.3.3 (a) (i))
Front Brake pipe corroded, covered in grease or other material both sides (1.1.11 (c))
Offside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Rear Coil spring corroded both sides (5.3.1 (b) (i))
Sub-frame corroded but not seriously weakened front and rear (5.3.3 (b) (i))
Vehicle structure is corroded but structural rigidity is not significantly reduced front to rear (6.1.1 (c) (i))
Front Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))
Integral body structure is corroded but structural rigidity is not significantly reduced under vehicle chassis and inner sills corroded front to rear (6.1.1 (c) (i))
Rear Brake pipe corroded, covered in grease or other material before wheel cylinder both sides (1.1.11 (c))
Rear Coil spring corroded both (5.3.1 (b) (i))
Rear axle corroded
Subframe mounting prescribed area is corroded but not considered excessive front and rear (5.3.6 (a) (i))
head lights have poor beam condition both
Emissions unable to be completed (8.2.1.2 (d))
Engine MIL inoperative or indicates a malfunction (8.2.1.2 (h))
Nearside Front Inner Suspension arm pin or bush excessively worn (5.3.4 (a) (i))
Offside Front Inner Suspension arm pin or bush excessively worn (5.3.4 (a) (i))
Offside Stop lamp(s) not working (4.3.1 (a) (ii))
Rear Exhaust has a major leak of exhaust gases box (6.1.2 (a))
Supplementary restraint system warning lamp indicates a fault (7.1.6 (a))
Front Anti-roll bar pin or bush worn but not resulting in excessive movement both sides (5.3.4 (a) (i))
Front Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))
Integral body structure is corroded but structural rigidity is not significantly reduced under vehicle chassis and inner sills corroded front to rear (6.1.1 (c) (i))
Rear Brake pipe corroded, covered in grease or other material before wheel cylinder both sides (1.1.11 (c))
Rear Coil spring corroded both (5.3.1 (b) (i))
Rear axle corroded
Subframe mounting prescribed area is corroded but not considered excessive front and rear (5.3.6 (a) (i))
head lights have poor beam condition both
Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Offside Front Outer Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))
Rear Tyre slightly damaged/cracking or perishing both side (5.2.3 (d) (ii))
vehicle has corrosion underneath, all over and on component
Front Windscreen wiper does not clear the windscreen effectively (3.4 (b) (ii))
Offside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced outer sill (6.1.1 (c) (i))
Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Offside Front Outer Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))
Rear Tyre slightly damaged/cracking or perishing both side (5.2.3 (d) (ii))
vehicle has corrosion underneath, all over and on component
Offside Front Engine MIL inoperative or indicates a malfunction EML INDICATES A FAULT (8.2.1.2 (h))
Offside Front Supplementary restraint system warning lamp indicates a fault (7.1.6 (a))
Parking brake efficiency below requirements (1.4.2 (a) (i))
Windscreen washer provides insufficient washer liquid (3.5 (a))
Brake lever has insufficient reserve travel (1.1.2 (a))
Engine MIL inoperative or indicates a malfunction (8.2.1.2 (h))
Nearside Rear Brake pipe excessively corroded (1.1.11 (c))
Offside Front Macpherson strut corroded and seriously weakened (5.3.3 (b) (i))
Offside Rear Brake pipe excessively corroded (1.1.11 (c))
Offside Rear Road wheel badly distorted (5.2.2 (c) (i))
Parking brake efficiency below requirements (1.4.2 (a) (i))
Supplementary restraint system warning lamp indicates a fault (7.1.6 (a))
Nearside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Nearside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Offside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Central Exhaust emissions likely to be affected by an exhaust leak (8.2.2.1 (b))
Central Exhaust has a major leak of exhaust gases (6.1.2 (a))
Emissions not tested (8.2.2.2 (e))
Nearside Front Windscreen wiper does not clear the windscreen effectively (3.4 (b) (ii))
Offside Front Windscreen wiper does not clear the windscreen effectively (3.4 (b) (ii))
Front Brake pad(s) wearing thin (1.1.13 (a) (ii))
Nearside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Offside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Exhaust noisy (8.1.1 (a))
Nearside Front Shock absorbers light misting of oil or has limited damping effect (5.3.2 (b))
Nearside Front Suspension arm pin or bush worn but not resulting in excessive movement rear bush (5.3.4 (a) (i))
Offside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Offside Front Wheel bearing slightly noisy (5.1.3 (b) (i))
Nearside Rear Outer Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill (5.3.6 (a) (i))
Offside Rear Outer Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill (5.3.6 (a) (i))
Registration plate lamp inoperative in the case of a single lamp or all lamps (4.7.1 (b) (ii))
Offside Front Tyre has ply or cords exposed (5.2.3 (d) (ii)) DANGEROUS
Exhaust noisy (8.1.1 (a))
Nearside Front Shock absorbers light misting of oil or has limited damping effect (5.3.2 (b))
Nearside Front Suspension arm pin or bush worn but not resulting in excessive movement rear bush (5.3.4 (a) (i))
Offside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Offside Front Wheel bearing slightly noisy (5.1.3 (b) (i))
Hazard warning switch inoperative (4.4.2 (a) (ii))
Nearside Brake pipe excessively corroded front to rear (1.1.11 (c))
Offside Brake pipe excessively corroded front to rear (1.1.11 (c))
Nearside Front Tyre tread depth below requirements of 1.6mm (5.2.3 (e)) DANGEROUS
Offside Front Tyre tread depth below requirements of 1.6mm (5.2.3 (e)) DANGEROUS
Nearside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Offside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Offside Rear Brake pipe slightly corroded (3.6.B.2c)
Registration plate lamp not working (1.1.C.1d)
Nearside Front Brake pad(s) wearing thin (3.5.1g)
How Reliable is the Toyota Aygo?
Based on 3,073,569 MOT tests across 286,185 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
SW56 EOP is a 2006 Toyota Aygo in Blue with a 998cc petrol engine. This vehicle has been through 24 MOT tests with a personal pass rate of 58.3%.
Across all 2006 Toyota Aygo models, the average MOT pass rate is 73.6% with a typical mileage of 60,291 miles. This particular vehicle has a lower pass rate than the average for its year, which may indicate maintenance issues worth investigating.
The most common reason a Toyota Aygo fails its MOT is tyre tread depth below requirements of 1.6mm, accounting for 33,372 recorded failures. If you're considering buying SW56 EOP, it's worth having these areas checked by a mechanic before committing.
The Toyota Aygo typically stays on UK roads for around 21 years. At 20 years old, this Toyota Aygo is approaching the upper end of the typical lifespan for this model.
Frequently Asked Questions
How do I check the history of SW56 EOP?
You can check the full history of SW56 EOP by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was SW56 EOP registered?
SW56 EOP is a 2006 Toyota Aygo, first registered on 29 November 2006.
Is SW56 EOP safe to buy?
The MOT history for SW56 EOP shows 24 tests with a 58.3% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does SW56 EOP have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on SW56 EOP. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.