MOT Status
ValidMileage
102,220 miAbove average mileage for this year
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Front Inner Anti-roll bar pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Nearside Front Lower Suspension arm ball joint has slight play (5.3.4 (a) (i))
Offside Front Lower Suspension arm ball joint has slight play (5.3.4 (a) (i))
Offside Integral body structure is corroded but structural rigidity is not significantly reduced front end inner sill (6.1.1 (c) (i))
Play in steering rack inner joint(s) ()
Rear Brake hose has slight corrosion to ferrule (1.1.12 (f) (i))
Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Rear Suspension rod pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Rear Towbar component corroded, but not excessively (6.1.6 (a))
Rear Upper Suspension spring mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Rear Vehicle structure slightly corroded within 30cm of towbar mounting (6.1.6 (i) (i))
Suspension rod corroded but not seriously weakened rear tie rod arms (5.3.3 (b) (i))
Windscreen damaged but not adversely affecting driver's view (3.2 (a) (i))
Nearside Inner Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced sill (6.1.1 (c) (i))
Offside Inner Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced sill (6.1.1 (c) (i))
Supplementary restraint system warning lamp indicates a fault (7.1.6 (a))
Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced gearbox mounting cross member (6.1.1 (c) (i))
Front Inner Anti-roll bar pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Nearside Front Lower Suspension arm ball joint has slight play (5.3.4 (a) (i))
Nearside Rear Suspension spring mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Offside Front Lower Suspension arm ball joint has slight play (5.3.4 (a) (i))
Offside Rear Suspension spring mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Offside Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))
Oil leak, but not excessive slight oil leak rear differential (8.4.1 (a) (i))
Play in steering rack inner joint(s) ()
Rear Anti-roll bar corroded but not seriously weakened (5.3.3 (b) (i))
Rear Brake hose has slight corrosion to ferrule (1.1.12 (f) (i))
Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Rear Integral body structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))
Rear Towbar component corroded, but not excessively (6.1.6 (a))
Windscreen damaged but not adversely affecting driver's view (3.2 (a) (i))
Front Inner Anti-roll bar pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Nearside Front Tyre slightly damaged outer side wall (5.2.3 (d) (ii))
Nearside Front Tyre worn close to legal limit/worn on edge 2.5mm (5.2.3 (e))
Nearside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Nearside Rear Upper Suspension spring mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Offside Front Coil spring corroded (5.3.1 (b) (i))
Offside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Offside Rear Upper Suspension spring mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Rear Anti-roll bar corroded but not seriously weakened (5.3.3 (b) (i))
Rear Brake hose has slight corrosion to ferrule (1.1.12 (f) (i))
Rear Coil spring corroded (5.3.1 (b) (i))
Rear Integral body structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))
Rear Suspension rod pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Rear Towbar component corroded, but not excessively (6.1.6 (a))
Rear Sub-frame corroded to the extent that the rigidity of the assembly is significantly reduced (6.1.1 (c) (i))
Windscreen wiper does not clear the windscreen effectively (3.4 (b) (ii))
Front Coil spring corroded (5.3.1 (b) (i))
Front Inner Anti-roll bar pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Nearside Front Tyre worn close to legal limit/worn on edge 2.5mm (5.2.3 (e))
Nearside Rear Upper Suspension spring mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Offside Rear Upper Suspension spring mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Offside Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))
Rear Anti-roll bar corroded but not seriously weakened (5.3.3 (b) (i))
Rear Brake hose has slight corrosion to ferrule (1.1.12 (f) (i))
Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Rear Coil spring corroded (5.3.1 (b) (i))
Rear Integral body structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))
Rear Suspension rod pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Towbar component corroded, but not excessively (6.1.6 (a))
Rear Sub-frame corroded and seriously weakened (5.3.3 (b) (i))
Coil spring corroded front and rear springs slightly corroded (5.3.1 (b) (i))
Exhaust emits excessive smoke or vapour but not likely to obscure the vision of other road users (8.2.2.2 (c))
Front Inner Anti-roll bar pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Nearside Front Tyre worn close to legal limit/worn on edge 2.5mm (5.2.3 (e))
Offside Front Service brake fluctuating, but not excessively (1.2.1 (e))
Offside Front Shock absorbers has light misting of oil (5.3.2 (b))
Rear Anti-roll bar corroded but not seriously weakened (5.3.3 (b) (i))
Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Rear Integral body structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))
Rear Upper Suspension rod pin or bush worn but not resulting in excessive movement rear most bushes deteriorated (5.3.4 (a) (i))
Rear Upper Suspension spring mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
TPMS warning message activated
Brake hose has slight corrosion to ferrule both rear (1.1.12 (f) (i))
Coil spring corroded both rear (5.3.1 (b) (i))
Front Inner Anti-roll bar pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Offside Front Coil spring corroded (5.3.1 (b) (i))
Prop shaft joint worn, but not excessively front propshaft rear joint (6.1.7 (c) (i))
Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Rear Integral body structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))
Rear Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))
Rear Vehicle structure slightly corroded within 30cm of towbar mounting (6.1.6 (i) (i))
front brake disc backing covers missing
Nearside Front Position lamp light intensity significantly reduced (4.2.3 (a) (ii))
Nearside Rear Lower Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner and outer sill (5.3.6 (a) (i))
Offside Rear Lower Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner sill (5.3.6 (a) (i))
Offside Windscreen washer provides insufficient washer liquid (3.5 (a))
Rear Towbar component excessively corroded (6.1.6 (a))
Battery insecure but not likely to fall from carrier (4.13 (a) (i))
Rear Brake hose has slight corrosion to ferrule (1.1.12 (f) (i))
Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))
front brake disc backing covers corroded/deteriorated
Nearside Rear Lower Integral body structure is corroded but structural rigidity is not significantly reduced inner sill (6.1.1 (c) (i))
Rear Brake hose has slight corrosion to ferrule (1.1.12 (f) (i))
Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Rear Integral body structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))
Rear Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))
Rear Vehicle structure slightly corroded within 30cm of towbar mounting (6.1.6 (i) (i))
Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))
front brake disc backing covers corroded/deteriorated
Nearside Front Brake hose ferrule excessively corroded (1.1.12 (f) (i))
Nearside Front Lower Suspension arm ball joint excessively worn (5.3.4 (a) (i))
Offside Front Brake hose ferrule excessively corroded (1.1.12 (f) (i))
Offside Front Position lamp not working (4.2.1 (a) (ii))
Offside Obligatory mirror does not provide a view to the rear (3.3 (c))
Nearside Rear Brake hose has slight corrosion to ferrule (1.1.12 (f) (i))
Nearside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Offside Rear Brake hose has slight corrosion to ferrule (1.1.12 (f) (i))
Offside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Rear Integral body structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))
Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))
Rear Vehicle structure slightly corroded within 30cm of towbar mounting (6.1.6 (i) (i))
front brake disc backing covers deteriorated/corroded
Nearside Front Brake hose has slight corrosion to ferrule (1.1.12 (f) (i))
Nearside Rear Brake pipe corroded, covered in grease or other material unions (1.1.11 (c))
Offside Front Brake hose has slight corrosion to ferrule (1.1.12 (f) (i))
Offside Rear Brake pipe corroded, covered in grease or other material unions (1.1.11 (c))
Rear Integral body structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))
Rear Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))
Rear Towbar slightly corroded within 30cm of towbar mounting (6.1.6 (i) (i))
front brake disc backing covers deteriorated/corroded
main exhaust box heat shield insecure
Nearside Front Upper Suspension arm ball joint excessively worn (5.3.4 (a) (i))
Offside Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))
Registration plate lamp does not illuminate simultaneously with the position lamps (4.7.2 (a))
Nearside Front Brake hose has slight corrosion to ferrule (1.1.12 (f) (i))
Nearside Rear Brake pipe corroded, covered in grease or other material unions (1.1.11 (c))
Offside Front Brake hose has slight corrosion to ferrule (1.1.12 (f) (i))
Offside Rear Brake pipe corroded, covered in grease or other material unions (1.1.11 (c))
Rear Integral body structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))
Rear Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))
Rear Towbar slightly corroded within 30cm of towbar mounting (6.1.6 (i) (i))
front brake disc backing covers deteriorated/corroded
main exhaust box heat shield insecure
Rear Coil spring corroded (5.3.1 (b) (i))
Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))
Rear Towbar slightly corroded within 30cm of towbar mounting (6.1.6 (i) (i))
Offside Rear coil spring corroded (2.4.C.1b)
Rear Brake pad(s) wearing thin (3.5.1g)
Towbar component slightly corroded (6.6.1)
Nearside Front Shock absorber has a serious fluid leak (2.7.3)
Nearside Front suspension has excessive play in a lower suspension ball joint (2.5.B.1a)
Offside Front Shock absorber has a serious fluid leak (2.7.3)
Offside Front suspension has excessive play in a lower suspension ball joint (2.5.B.1a)
Offside Rear coil spring corroded (2.4.C.1b)
Rear Brake pad(s) wearing thin (3.5.1g)
Towbar component slightly corroded (6.6.1)
Front registration plate missing (6.3.1a)
Brake hose has slight corrosion to ferrules all four (3.6.B.4e)
Offside Front Brake pad(s) less than 1.5 mm thick and brake disc badly scored (3.5.1g)
Windscreen washer provides insufficient washer liquid (8.2.3)
Windscreen wiper does not clear the windscreen effectively both (8.2.2)
Brake hose has slight corrosion to ferrules all four (3.6.B.4e)
Brake hydraulic reservoir fluid close to minimum level (3.6.G.1b)
spare wheel valve corroded away
Brake hose has slight corrosion to ferrules (3.6.B.4e)
Nearside Front Tyre worn close to the legal limit (4.1.E.1)
Offside Front Tyre worn close to the legal limit (4.1.E.1)
Windscreen has damage to an area less than a 10mm circle within zone 'A' (8.3.1a)
Nearside Rear Tyre has a cut in excess of the requirements deep enough to reach the ply or cords (4.1.D.1a)
Offside Front position lamp(s) not working (1.1.A.3b)
Offside Rear Tyre has a cut in excess of the requirements deep enough to reach the ply or cords (4.1.D.1a)
Windscreen has damage to an area less than a 10mm circle within zone 'A' (8.3.1a)
Windscreen has damage to an area less than a 10mm circle within zone 'A' (8.3.1a)
How Reliable is the Jeep G-cherokee S Ltd Crd A?
Based on 4,008 MOT tests across 272 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
SW59 FYN is a 2009 Jeep G-cherokee S Ltd Crd A in Blue with a 2,987cc diesel engine. This vehicle has been through 23 MOT tests with a personal pass rate of 56.5%.
Across all 2009 Jeep G-cherokee S Ltd Crd A models, the average MOT pass rate is 75.2% with a typical mileage of 83,014 miles. This particular vehicle has a lower pass rate than the average for its year, which may indicate maintenance issues worth investigating.
The most common reason a Jeep G-cherokee S Ltd Crd A fails its MOT is windscreen wiper does not clear the windscreen effectively, accounting for 35 recorded failures. If you're considering buying SW59 FYN, it's worth having these areas checked by a mechanic before committing.
The Jeep G-cherokee S Ltd Crd A typically stays on UK roads for around 18 years. At 17 years old, this Jeep G-cherokee S Ltd Crd A is approaching the upper end of the typical lifespan for this model.
Frequently Asked Questions
How do I check the history of SW59 FYN?
You can check the full history of SW59 FYN by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was SW59 FYN registered?
SW59 FYN is a 2009 Jeep G-cherokee S Ltd Crd A, first registered on 29 December 2009.
Is SW59 FYN safe to buy?
The MOT history for SW59 FYN shows 23 tests with a 56.5% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does SW59 FYN have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on SW59 FYN. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.