MOT Status
ExpiredMileage
98,805 miSignificantly above average — investigate
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Central Exhaust has a minor leak of exhaust gases (6.1.2 (a))
Front Anti-roll bar pin or bush worn but not resulting in excessive movement both (5.3.4 (a) (i))
Front Headlamp has a product on the lens but not seriously reducing light output both (4.1.4 (b))
Nearside Rear Inner Suspension component mounting prescribed area is corroded but not considered excessive sill (5.3.6 (a) (i))
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive inner sill (5.3.6 (a) (i))
Oil leak, but not excessive (8.4.1 (a) (i))
underbody corrosion to vehicle
Front Oil leak, but not excessive (8.4.1 (a) (i))
Nearside Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Offside Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Nearside Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))
corrosion under vehicle
Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))
Nearside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength arch (5.3.6 (a) (i))
Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))
Offside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))
Offside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength arch (5.3.6 (a) (i))
Offside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sil (5.3.6 (a) (i))
Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength lower arm rear bush mounting area (5.3.6 (a) (i))
Nearside Rear Suspension arm pin or bush excessively worn lower arm outer bush (5.3.4 (a) (i))
Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill (5.3.6 (a) (i))
Nearside Stop lamp(s) not working (4.3.1 (a) (ii))
Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength lower arm rear bush mounting area (5.3.6 (a) (i))
Offside Rear Suspension arm pin or bush excessively worn lower arm outer bush (5.3.4 (a) (i))
Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill (5.3.6 (a) (i))
Offside Stop lamp(s) not working (4.3.1 (a) (ii))
Rear Sub-frame corroded and seriously weakened (5.3.3 (b) (i))
Brake hose has slight corrosion to ferrule all (1.1.12 (f) (i))
Exhaust has a minor leak of exhaust gases (6.1.2 (a))
Front Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))
Nearside Front Tyre worn close to legal limit/worn on edge outer edge worn (5.2.3 (e))
Nearside Headlamp lens slightly defective (4.1.1 (b) (i))
Nearside Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))
Offside Front Tyre worn close to legal limit/worn on edge outer edge worn (5.2.3 (e))
Offside Headlamp lens slightly defective (4.1.1 (b) (i))
Prop shaft bearing has slight play (6.1.7 (b) (i))
Prop shaft joint worn, but not excessively (6.1.7 (c) (i))
Suspension component corroded but not seriously weakened all (5.3.3 (b) (i))
fuel tank corroded
parking brake has little reserve travel and poor efficiency
Suspension component corroded but not seriously weakened rear subframe and all (5.3.3 (b) (i))
Suspension component mounting prescribed area is corroded but not considered excessive n/s and o/s front flech (5.3.6 (a) (i))
Vehicle structure is corroded but structural rigidity is not significantly reduced all under (6.1.1 (c) (i))
fuel tank corroded
Nearside Rear Outer Body panel corroded and likely to cause injury wheel arch (6.2.1 (a) (i))
Nearside Rear Outer Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill (5.3.6 (a) (i))
Offside Rear Outer Body panel corroded and likely to cause injury wheel arch (6.2.1 (a) (i))
Offside Rear Outer Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill (5.3.6 (a) (i))
Suspension component corroded but not seriously weakened rear subframe and all (5.3.3 (b) (i))
Suspension component mounting prescribed area is corroded but not considered excessive n/s and o/s front flech (5.3.6 (a) (i))
Vehicle structure is corroded but structural rigidity is not significantly reduced all under (6.1.1 (c) (i))
fuel tank corroded
Nearside Front Outer Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill (5.3.6 (a) (i))
Nearside Rear Anti-roll bar linkage ball joint excessively worn (5.3.4 (a) (i))
Nearside Rear Brake hose excessively damaged (1.1.12 (b) (ii))
Nearside Rear Outer Suspension arm pin or bush excessively worn (5.3.4 (a) (i))
Nearside Rear Outer Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill (5.3.6 (a) (i))
Nearside Rear Sub-frame corroded and seriously weakened (5.3.3 (b) (i))
Offside Front Outer Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill (5.3.6 (a) (i))
Offside Rear Outer Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill (5.3.6 (a) (i))
Offside Rear Sub-frame corroded and seriously weakened (5.3.3 (b) (i))
Offside Front Track rod end ball joint worn to the extent there is a serious risk of detachment (2.1.3 (b) (ii)) DANGEROUS
Sub-frame fractured (5.3.3 (b) (ii)) DANGEROUS
Central Exhaust mounting defective (6.1.2 (a))
Exhaust has a minor leak of exhaust gases cat joints corroded (6.1.2 (a))
Nearside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Offside Rear Brake hose has slight corrosion to ferrule (1.1.12 (f) (i))
both rear archs corroded
under body corroded
Battery insecure and likely to fall from carrier (4.13 (a) (ii))
Nearside Rear Parking (secondary brake) on a single line braking system has inadequate effort at a wheel (1.3.1 (a) (i))
Nearside Rear Seat belt retracting mechanism defective (7.1.2 (e))
Nearside Track rod end ball joint has excessive play (2.1.3 (b) (i))
Parking brake efficiency below requirements (1.4.2 (a) (i))
Nearside Front Anti-roll bar linkage has excessive play in a pin/bush broken (2.4.G.2)
Parking brake: efficiency below requirements (3.7.B.7)
Front brake disc worn, pitted or scored, but not seriously weakened both (3.5.1i)
engine management light staying on
Nearside Rear Lower Suspension arm rubber bush deteriorated resulting in excessive movement outer (2.4.G.2)
Nearside Rear Trailing arm rubber bush bonding deteriorated resulting in excessive movement (2.4.G.2)
Nearside Rear Tyre has ply or cords exposed (4.1.D.1b)
Nearside Track rod end ball joint has excessive play (2.2.B.1f)
Offside Rear Shock absorber has a serious fluid leak and lower platform broken (2.7.3)
Offside Rear Tyre has ply or cords exposed (4.1.D.1b)
Offside Seat belt anchorage prescribed area is excessively corroded centre outer sill (5.2.6)
Parking brake lever has no reserve travel (3.1.6b)
Front brake disc worn, pitted or scored, but not seriously weakened both (3.5.1i)
Offside Rear Trailing arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Rear brake disc worn, pitted or scored, but not seriously weakened both (3.5.1i)
engine management light staying on
nearside front tyre bald outer edge
Rear brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)
Nearside Front position lamp(s) not working (1.1.A.3b)
Offside Headlamp aim too high and too far to the right. (1.8)
Rear brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)
Exhaust has a major leak of exhaust gases (7.1.2)
Exhaust tailpipe not capable of allowing the emission probe to be inserted (7.3.D.1)
Nearside Front Brake pipe excessively corroded (3.6.B.2c)
Nearside Headlamp aim beam image obviously incorrect (1.8.A.1b)
Nearside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Offside Headlamp aim beam image obviously incorrect (1.8.A.1b)
Offside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Offside Track rod end ball joint has excessive play (2.2.B.1f)
Nearside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Offside Front Anti-roll bar fractured (2.4.G.1)
Offside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Trailer electrical socket (13 pin) not operating the trailer lamps as intended (1.9.4)
Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)
Nearside Rear Tyre worn close to the legal limit (4.1.E.1)
Offside Rear Tyre worn close to the legal limit (4.1.E.1)
Nearside Rear Brake pipe excessively corroded (3.6.B.2c)
Nearside rear brake binding (3.7.B.1)
Offside Rear Brake pipe excessively corroded (3.6.B.2c)
Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)
Nearside Rear Tyre worn close to the legal limit (4.1.E.1)
Offside Rear Tyre worn close to the legal limit (4.1.E.1)
Front Exhaust system not adequately supported (7.1.1)
Nearside Front position lamp(s) not working (1.1.A.3b)
Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)
rear parking brake recording little or no effort (3.7.B.6a)
Parking brake: efficiency below requirements (3.7.B.7) DANGEROUS
front no plate ,starting to peal
Brake pipe excessively corroded (3.6.B.2c)
Nearside Front Headlamp aim too high (1.8)
Offside Front Headlamp aim too high (1.8)
front no plate ,starting to peal
Brake pad(s) wearing thin (3.5.1g)
Brake pipe slightly corroded (3.6.B.2c)
brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)
front tyres worn on inner edges
Nearside Front constant velocity joint gaiter split (2.5.C.1a)
Nearside Rear Lower Tie bar/rod has excessive play in a pin/bush (2.4.G.2)
Nearside Rear Upper Tie bar/rod has excessive play in a pin/bush (2.4.G.2)
Offside Rear Lower Tie bar/rod has excessive play in a pin/bush (2.4.G.2)
Offside Rear Upper Tie bar/rod has excessive play in a pin/bush (2.4.G.2)
Service brake indicates brake judder (3.7.D.1)
Nearside Front Anti-roll bar attachment bracket/mounting fractured (2.4.G.1) DANGEROUS
Offside Rear Anti-roll bar rubber mounting deteriorated but not resulting in excessive movement (2.4.G.2)
altho the parking brake has passed the brake perfomance it appears the braking system is in need of ajustment or repair
Offside Rear Upper Anti-roll bar linkage has slight play in a ball joint (2.4.G.2)
How Reliable is the Mitsubishi Outlander?
Based on 726,436 MOT tests across 75,074 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
SX53 DYD is a 2003 Mitsubishi Outlander in Blue with a 2,378cc petrol engine. This vehicle has been through 33 MOT tests with a personal pass rate of 54.5%.
Across all 2003 Mitsubishi Outlander models, the average MOT pass rate is 69.6% with a typical mileage of 68,619 miles. This particular vehicle has a lower pass rate than the average for its year, which may indicate maintenance issues worth investigating.
The most common reason a Mitsubishi Outlander fails its MOT is tyre tread depth below requirements of 1.6mm, accounting for 4,278 recorded failures. If you're considering buying SX53 DYD, it's worth having these areas checked by a mechanic before committing.
The Mitsubishi Outlander typically stays on UK roads for around 22 years. At 23 years old, this Mitsubishi Outlander is approaching the upper end of the typical lifespan for this model.
Frequently Asked Questions
How do I check the history of SX53 DYD?
You can check the full history of SX53 DYD by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was SX53 DYD registered?
SX53 DYD is a 2003 Mitsubishi Outlander, first registered on 28 November 2003.
Is SX53 DYD safe to buy?
The MOT history for SX53 DYD shows 33 tests with a 54.5% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does SX53 DYD have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on SX53 DYD. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.