MOT Status
ExpiredMileage
173,045 miSignificantly above average — investigate
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
all body duk taped
Offside Inner Front constant velocity joint gaiter damaged to the extent that it no longer prevents the ingress of dirt etc (2.5.C.1a)
Offside Rear rear brake binding (3.7.B.1)
Power steering component(s) leaking (2.3.3b)
all body duk taped
Brake performance not tested (3.7.A.1)
Front Windscreen wiper does not clear the windscreen effectively (8.2.2)
Nearside Front Brake pipe excessively corroded (3.6.B.2c)
Nearside Front Front position lamp(s) not working (1.1.A.3b)
Nearside Front Headlamp not working on dipped beam (1.7.5a)
Nearside Rear Brake cable has wires broken and is significantly weakened (3.5.1b)
Offside Front Shock absorber detached (2.7.2b)
Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Offside Rear Rear fog lamp not working (1.3.2b)
Offside Rear Service brake grabbing severely (3.7.C.2)
Parking brake: efficiency below requirements (3.7.C.1b)
Service brake: efficiency below requirements (3.7.C.1a)
Lower Steering box has a slight oil leak (2.2.D.2e)
Nearside Front Anti-roll bar rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Offside Front Anti-roll bar rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
fuel pipes corroded but not to excess
Body has slight corrosion (6.1.B.2)
Body has slight corrosion (6.1.B.2)
Nearside Front Brake pipe slightly corroded (3.6.B.2c)
Offside Front Tyre worn close to the legal limit (4.1.E.1)
Rear Suspension spring mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Seat belt anchorage prescribed area is corroded but not considered excessive (5.2.6)
Steering component mounting prescribed area is corroded but not considered excessive (2.2.C.1h)
Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Vehicle structure has slight corrosion (6.1.A.1)
Front Anti-roll bar rubber bush deteriorated resulting in excessive movement (2.4.G.2)
Nearside Front suspension has excessive play in a upper suspension ball joint (2.5.B.1a)
Nearside Front wheel bearing has excessive play (2.5.A.3c)
Nearside Rear Brake pipe excessively corroded (3.6.B.2c)
Offside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings (6.1.B.2)
Offside Front Brake pipe excessively corroded (3.6.B.2c)
Offside Front Power steering component(s) leaking from a failed seal (2.3.3b)
Offside Rear Brake pipe excessively corroded (3.6.B.2c)
Offside Rear Tyre has a cut in excess of the requirements deep enough to reach the ply or cords (4.1.D.1a)
Offside Registration plate lamp not working (1.1.C.1d)
Body has slight corrosion (6.1.B.2)
Body has slight corrosion (6.1.B.2)
Nearside Front Brake pipe slightly corroded (3.6.B.2c)
Offside Front Tyre worn close to the legal limit (4.1.E.1)
Rear Suspension spring mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Seat belt anchorage prescribed area is corroded but not considered excessive (5.2.6)
Steering component mounting prescribed area is corroded but not considered excessive (2.2.C.1h)
Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Vehicle structure has slight corrosion (6.1.A.1)
Body has slight corrosion (6.1.B.2)
Body has slight corrosion (6.1.B.2)
Front Anti-roll bar rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Front Brake pad(s) wearing thin (3.5.1g)
Front Brake pipe slightly corroded (3.6.B.2c)
Front Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Front Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Front Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Front wheel bearing has slight play (2.5.A.3c)
Nearside Rear Tyre worn close to the legal limit (4.1.E.1)
Nearside Steering pivot point has slight play (2.2.B.1g)
Offside Rear Tyre worn close to the legal limit (4.1.E.1)
Rear Brake pipe slightly corroded (3.6.B.2c)
Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Rear Suspension spring mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Vehicle structure has slight corrosion (6.1.A.1)
Nearside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings (6.1.B.2)
Nearside Front Lower Shock absorber has an excessively worn bush (2.7.4)
Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Offside Front Anti-roll bar linkage rubber mounting deteriorated resulting in excessive movement (2.4.G.2)
Offside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings (6.1.B.2)
Offside Front Power steering component(s) leaking from a failed seal (2.3.3b)
Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Offside Headlamp not working on dipped beam (1.7.5a)
Offside Rear fog lamp has less than 50% of the light sources illuminating (1.3.2b)
Body has slight corrosion (6.1.B.2)
Body has slight corrosion (6.1.B.2)
Front Anti-roll bar rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Front Brake pad(s) wearing thin (3.5.1g)
Front Brake pipe slightly corroded (3.6.B.2c)
Front Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Front Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Front Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Front wheel bearing has slight play (2.5.A.3c)
Nearside Rear Tyre worn close to the legal limit (4.1.E.1)
Nearside Steering pivot point has slight play (2.2.B.1g)
Offside Rear Tyre worn close to the legal limit (4.1.E.1)
Rear Brake pipe slightly corroded (3.6.B.2c)
Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Rear Suspension spring mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Vehicle structure has slight corrosion (6.1.A.1)
Body has slight corrosion (6.1.B.2)
Front Brake pad(s) wearing thin (3.5.1g)
Front Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Rear Suspension spring mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Vehicle structure has slight corrosion (6.1.A.1)
near side rear tyre cracked
Nearside Front Brake pipe excessively corroded (3.6.B.2c)
Nearside Front Power steering component(s) leaking from a failed seal (2.3.3b)
Nearside Front Steering pivot point has excessive play (2.2.B.1g)
Nearside Front constant velocity joint gaiter split (2.5.C.1a)
Nearside Rear Shock absorber has an excessively worn bush (2.7.4)
Offside Front Brake pipe excessively corroded (3.6.B.2c)
Offside Front constant velocity joint gaiter split (2.5.C.1a)
Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings (6.1.B.2)
Body has slight corrosion (6.1.B.2)
Front Brake pad(s) wearing thin (3.5.1g)
Front Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Rear Suspension spring mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Vehicle structure has slight corrosion (6.1.A.1)
near side rear tyre cracked
Front Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Nearside Front Brake pipe slightly corroded (3.6.B.2c)
Nearside Front Steering pivot point has slight play (2.2.B.1g)
Nearside Rear Brake pipe slightly corroded (3.6.B.2c)
Offside Front Brake pipe slightly corroded (3.6.B.2c)
Offside Front Power steering component(s) has slight seepage from a seal (2.3.3b)
Offside Front Steering pivot point has slight play (2.2.B.1g)
Offside Rear Brake pipe slightly corroded (3.6.B.2c)
Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Rear Suspension spring mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Vehicle structure has slight corrosion (6.1.A.1)
Nearside Front Lower Shock absorber has an excessively worn bush (2.7.4)
Offside Brake pipe excessively corroded (3.6.B.2c)
Offside Front Lower Shock absorber has an excessively worn bush (2.7.4)
Offside Front Power steering component(s) leaking from a failed seal (2.3.3b)
Front Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Nearside Front Brake pipe slightly corroded (3.6.B.2c)
Nearside Front Steering pivot point has slight play (2.2.B.1g)
Nearside Rear Brake pipe slightly corroded (3.6.B.2c)
Offside Front Brake pipe slightly corroded (3.6.B.2c)
Offside Front Steering pivot point has slight play (2.2.B.1g)
Offside Rear Brake pipe slightly corroded (3.6.B.2c)
Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Rear Suspension spring mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Vehicle structure has slight corrosion (6.1.A.1)
Nearside Front Brake pipe slightly corroded (3.6.B.2c)
Nearside Front Brake pipe slightly corroded (3.6.B.2c)
Nearside Front Front constant velocity joint gaiter deteriorated (2.5.C.1a)
Offside Front Brake pipe slightly corroded (3.6.B.2c)
Offside Front constant velocity joint gaiter deteriorated (2.5.C.1a)
Offside Rear Brake pipe slightly corroded (3.6.B.2c)
slight oil leak at steering box
Brake pipe slightly corroded (3.6.B.2c)
Front wheel bearing has slight play (2.5.A.3c)
Power steering component(s) has slight seepage from a seal (2.3.3b)
Tyre worn close to the legal limit (4.1.E.1)
Front brake disc excessively pitted (3.5.1h)
Brake pipe slightly corroded (3.6.B.2c)
Front wheel bearing has slight play (2.5.A.3c)
Power steering component(s) has slight seepage from a seal (2.3.3b)
Tyre worn close to the legal limit (4.1.E.1)
Centre Lower Exhaust system not adequately supported (7.1.1)
Nearside Front Lower Shock absorber has an excessively worn bush (2.7.4)
Offside Front Lower Shock absorber has an excessively worn bush (2.7.4)
How Reliable is the Mazda B Series?
Based on 136,422 MOT tests across 9,870 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
SY03 RYT is a 2003 Mazda B Series in Silver with a 2,499cc diesel engine. This vehicle has been through 18 MOT tests with a personal pass rate of 55.6%.
Across all 2003 Mazda B Series models, the average MOT pass rate is 70.5% with a typical mileage of 84,674 miles. This particular vehicle has a lower pass rate than the average for its year, which may indicate maintenance issues worth investigating.
The most common reason a Mazda B Series fails its MOT is brake pipe excessively corroded, accounting for 9,638 recorded failures. If you're considering buying SY03 RYT, it's worth having these areas checked by a mechanic before committing.
The Mazda B Series typically stays on UK roads for around 38 years. At 23 years old, this Mazda B Series is well into its expected lifespan but still has years ahead.
Frequently Asked Questions
How do I check the history of SY03 RYT?
You can check the full history of SY03 RYT by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was SY03 RYT registered?
SY03 RYT is a 2003 Mazda B Series, first registered on 1 March 2003.
Is SY03 RYT safe to buy?
The MOT history for SY03 RYT shows 18 tests with a 55.6% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does SY03 RYT have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on SY03 RYT. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.