MOT Status
ExpiredMileage
129,702 miSignificantly above average — investigate
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Nearside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Offside Front Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Offside Registration plate lamp not working (1.1.C.1d)
Nearside Front Suspension arm ball joint dust cover deteriorated, but preventing the ingress of dirt (2.4.G.2)
Nearside Rear Anti-roll bar linkage rubber mounting deteriorated but not resulting in excessive movement (2.4.G.2)
Offside Front Suspension arm ball joint dust cover damaged, but preventing the ingress of dirt (2.4.G.2)
Vehicle structure has slight corrosion (6.1.B.2)
heat shield loose
Nearside Registration plate lamp not working (1.1.C.1d)
Offside Rear coil spring broken (2.4.C.1a)
Nearside Front Suspension arm ball joint dust cover deteriorated, but preventing the ingress of dirt (2.4.G.2)
Nearside Rear Anti-roll bar linkage rubber mounting deteriorated but not resulting in excessive movement (2.4.G.2)
Offside Front Suspension arm ball joint dust cover damaged, but preventing the ingress of dirt (2.4.G.2)
Vehicle structure has slight corrosion (6.1.B.2)
heat shield loose
Battery insecure
Both outer sills holed at front
Brake pipe slightly corroded (3.6.B.2c)
Brake pipe slightly corroded (3.6.B.2c)
Offside Front Brake pipe slightly corroded (3.6.B.2c)
Unable to check full length of sills as covered
Windscreen has damage to an area less than a 10mm circle within zone 'A' (8.3.1a)
Nearside rear parking brake recording little or no effort (3.7.B.6a)
Parking brake lever has no reserve travel (3.1.6b)
Parking brake: efficiency below requirements (3.7.B.7)
Battery insecure
Both outer sills holed at front
Brake pipe slightly corroded (3.6.B.2c)
Brake pipe slightly corroded (3.6.B.2c)
Offside Front Brake pipe slightly corroded (3.6.B.2c)
Unable to check full length of sills as covered
Windscreen has damage to an area less than a 10mm circle within zone 'A' (8.3.1a)
Windscreen has damage to an area less than a 10mm circle within zone 'A' (8.3.1a)
parking brake poor
Nearside Headlamp not working on dipped beam (1.7.5a)
Nearside rear brake binding (3.7.B.1)
Parking brake lever has no reserve travel (3.1.6b)
Windscreen has damage to an area less than a 10mm circle within zone 'A' (8.3.1a)
Nearside Outer Subframe mounting prescribed area is excessively corroded (2.4.A.3)
Nearside front brake binding (3.7.B.1)
Offside Outer Subframe mounting prescribed area is excessively corroded (2.4.A.3)
Offside front brake binding (3.7.B.1)
Windscreen has a sticker or other obstruction encroaching by more than 10mm within zone 'A' (8.3.1b)
Nearside Front Brake pipe slightly corroded (3.6.B.2c)
Nearside Headlamp aim too low (1.8)
Offside Front Brake pipe slightly corroded (3.6.B.2c)
Offside Headlamp aim too high (1.8)
Rear Exhaust system not adequately supported (7.1.1)
Nearside Front Brake pipe slightly corroded (3.6.B.2c)
Offside Front Brake pipe slightly corroded (3.6.B.2c)
Nearside Rear Brake pad(s) wearing thin (3.5.1g)
Nearside Rear Tyre worn close to the legal limit (4.1.E.1)
Offside Rear Brake pad(s) wearing thin (3.5.1g)
Offside Rear Tyre worn close to the legal limit (4.1.E.1)
Windscreen has damage to an area less than a 10mm circle within zone 'A' (8.3.1a)
slight warp n/s/f brake disc
Nearside Front brake disc slightly pitted (3.5.1h)
Offside Front Windscreen has damage to an area less than a 10mm circle within zone 'A' (8.3.1a)
Offside Front Windscreen has damage to an area less than a 10mm circle within zone 'A' (8.3.1a)
Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Offside Front Tyre worn close to the legal limit (4.1.E.1)
How Reliable is the Mazda 6?
Based on 1,904,140 MOT tests across 159,651 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
SY03 RZL is a 2003 Mazda 6 in Silver with a 1,798cc petrol engine. This vehicle has been through 17 MOT tests with a personal pass rate of 58.8%.
Across all 2003 Mazda 6 models, the average MOT pass rate is 71.6% with a typical mileage of 83,392 miles. This particular vehicle has a lower pass rate than the average for its year, which may indicate maintenance issues worth investigating.
The most common reason a Mazda 6 fails its MOT is tyre tread depth below requirements of 1.6mm, accounting for 45,082 recorded failures. If you're considering buying SY03 RZL, it's worth having these areas checked by a mechanic before committing.
The Mazda 6 typically stays on UK roads for around 24 years. At 23 years old, this Mazda 6 is approaching the upper end of the typical lifespan for this model.
Frequently Asked Questions
How do I check the history of SY03 RZL?
You can check the full history of SY03 RZL by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was SY03 RZL registered?
SY03 RZL is a 2003 Mazda 6, first registered on 19 March 2003.
Is SY03 RZL safe to buy?
The MOT history for SY03 RZL shows 17 tests with a 58.8% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does SY03 RZL have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on SY03 RZL. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.