2006 Toyota Aygo

Exhaust Lambda reading after 2nd fast idle outside specified limits (8.2.1.2 (c))

Exhaust carbon monoxide content after 2nd fast idle exceeds default limits (8.2.1.2 (b))

Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength subframe holed at (5.3.6 (a) (i))

Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis leg at abs pump (5.3.6 (a) (i))

Nearside Seat belt anchorage prescribed area strength or continuity significantly reduced outer sill holed at (7.1.1 (a) (i))

Offside Front Service brake excessively fluctuating and corroded (1.2.1 (e))

Offside Front Wheel bearing rough when rotated (5.1.3 (b) (i))

Parking brake efficiency below requirements (1.4.2 (a) (i))

Rear Brakes imbalanced across an axle Axle 2 (1.2.1 (b) (i))

Rear Shock absorbers has a serious fluid leak both (5.3.2 (b))

Suspension component mounting prescribed area excessively corroded significantly reducing structural strength front x member offside and nearside (5.3.6 (a) (i))

Rear floor pans soft

Exhaust Lambda reading after 2nd fast idle outside specified limits (8.2.1.2 (c))

Exhaust carbon monoxide content after 2nd fast idle exceeds default limits (8.2.1.2 (b))

Exhaust emits excessive dense blue smoke during acceleration (8.2.1.2 (g))

Exhaust hydrocarbon content after 2nd fast idle exceeds default limits (8.2.1.2 (b))

Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength suspension arm (5.3.6 (a) (i))

Offside Front Brake disc significantly and obviously worn (1.1.14 (a) (i))

Battery insecure (1.9.1)

Front Sub-frame corroded but not seriously weakened (2.4.G.1)

Nearside Front Brake pipe slightly corroded (3.6.B.2c)

Nearside Rear Shock absorber has a light misting of oil (2.7.3)

Nearside Rear Shock absorber has slight corrosion to the casing (2.7.2a)

Offside Front Brake pipe slightly corroded (3.6.B.2c)

Offside Rear Road wheel with a slightly distorted bead rim (4.2.A.1a)

Offside Rear Shock absorber has slight corrosion to the casing (2.7.2a)

Windscreen has damage to an area less than a 10mm circle within zone 'A' (8.3.1a)

Exhaust emissions carbon monoxide content after 2nd fast idle excessive (7.3.D.3)

Exhaust emissions carbon monoxide content at idle excessive (7.3.D.4)

Headlamp not working on main beam (1.7.5a)

Nearside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Offside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Offside rear parking brake recording little or no effort (3.7.B.6a)

Parking brake: efficiency below requirements (3.7.B.7)

Supplementary Restraint System warning lamp indicates a fault (5.4.2)

rear brake application uneven (3.7.B.2)

Front Sub-frame corroded but not seriously weakened (2.4.G.1)

Nearside Front Brake pipe slightly corroded (3.6.B.2c)

Nearside Rear Shock absorber has a light misting of oil (2.7.3)

Nearside Rear Shock absorber has slight corrosion to the casing (2.7.2a)

Offside Brake pipe slightly corroded front to rear at rear end (3.6.B.2c)

Offside Front Brake pipe slightly corroded (3.6.B.2c)

Offside Rear Road wheel with a slightly distorted bead rim (4.2.A.1a)

Offside Rear Shock absorber has slight corrosion to the casing (2.7.2a)

Parking brake lever has little reserve travel (3.1.6b)

engine lamp on

underside very rusty

Offside Brake pipe slightly corroded (3.6.B.2c)

Offside Front Brake pipe slightly corroded (3.6.B.2c)

Nearside Front Headlamp aim too far to the right (1.8)

Nearside rear brake binding (3.7.B.1)

Offside Brake pipe slightly corroded (3.6.B.2c)

Offside Front Brake pipe slightly corroded (3.6.B.2c)

Offside Rear Brake Gripping Slightly

Nearside Rear Shock absorber has slight corrosion to the casing (2.7.2a)

Offside Front Brake pipe slightly corroded (3.6.B.2c)

Windscreen has damage to an area less than a 10mm circle within zone 'A' (8.3.1a)

both front brake discs rusty/pitted around edges

Nearside Front position lamp(s) not working (1.1.A.3b)

Nearside Headlamp aim too high (1.8)

Nearside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Offside Headlamp aim beam image obviously incorrect (1.8.A.1b)

Offside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Offside rear brake binding (3.7.B.1) DANGEROUS

Nearside Rear Shock absorber has slight corrosion to the casing (2.7.2a)

Offside Front Brake pipe slightly corroded (3.6.B.2c)

Windscreen has damage to an area less than a 10mm circle within zone 'A' (8.3.1a)

both front brake discs rusty/pitted around edges

o/s rear wheel bearing not properly tested due to binding brake

oil level on low mark

Nearside Rear Shock absorber has slight corrosion to the casing (2.7.2a)

Offside Rear Shock absorber has slight corrosion to the casing (2.7.2a)

Windscreen has damage to an area less than a 10mm circle within zone 'A' (8.3.1a)

both front brake discs slightly corroded/pitted around edges

metal brake pipe at rear of A.B.S. unit looks to be quite rusty but unable to assess properly due to its location

n/s front valve stem slightly perished

o/s sill panel slightly distorted

Nearside Rear An item not tested (Manual)

Nearside Registration plate lamp not working (1.1.C.1d)

Nearside Brake pipe leaking (3.6.A.1) DANGEROUS

Nearside rear brake binding (3.7.B.1) DANGEROUS

rear brake application uneven (3.7.B.2) DANGEROUS

Nearside Rear Shock absorber has slight corrosion to the casing (2.7.2a)

Offside Rear Shock absorber has slight corrosion to the casing (2.7.2a)

Windscreen has damage to an area less than a 10mm circle within zone 'A' (8.3.1a)

both front brake discs slightly corroded/pitted around edges

metal brake pipe at rear of A.B.S. unit looks to be quite rusty but unable to assess properly due to its location

n/s front valve stem slightly perished

o/s sill panel slightly distorted

Front Brake pad(s) wearing thin (3.5.1g)

both front brake discs rusty/pitted

n/s front valve stem slightly perished

n/s rear brake gripping slightly

o/s sill panel slightly distorted

oil on min mark

various metal brake pipes slightly corroded

Exhaust system not adequately supported (7.1.1)

Front Brake pad(s) wearing thin (3.5.1g)

both front brake discs rusty/pitted

n/s front valve stem slightly perished

n/s rear brake gripping slightly

oil on min mark

various metal brake pipes slightly corroded

both front brake discs rusty around edges

both front brake discs slightly worn

wiper blade slightly torn

Nearside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Offside Headlamp aim too low (1.8)

Offside Rear Tyre worn close to the legal limit (4.1.E.1)

Windscreen has a sticker or other obstruction encroaching into the swept area by more than 40mm outside zone 'A' (8.3.1e)

both front brake discs rusty around edges

both front brake discs slightly worn

wiper blade slightly torn

Windscreen has damage to an area less than a 10mm circle within zone 'A' (8.3.1a)

Windscreen has damage to an area less than a 10mm circle within zone 'A' (8.3.1a)