MOT Status
ValidMileage
173,227 miSignificantly above average — investigate
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Nearside Rear Subframe mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Offside Front Lower Suspension arm ball joint dust cover severely deteriorated (5.3.4 (b) (i))
Offside Rear Subframe mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
both front jacking points corroded
Nearside Brake cable has restricted free movement (1.1.15 (e))
Nearside Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))
Offside Drive shaft bearing housing insecure (6.1.7 (f) (i))
Parking brake efficiency below requirements (1.4.2 (a) (i))
Nearside Rear Brake pipe inadequately clipped or supported (1.1.11 (d) (i))
Nearside Rear Subframe mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Offside Front Lower Suspension arm ball joint dust cover severely deteriorated (5.3.4 (b) (i))
Offside Outer Drive shaft joint constant velocity boot severely deteriorated (6.1.7 (g) (i))
Offside Rear Subframe mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
both front jacking points corroded
Nearside Front Suspension component mounting prescribed area is corroded but not considered excessive jacking point (5.3.6 (a) (i))
Nearside Rear Subframe mounting prescribed area is corroded but not considered excessive inner sill (5.3.6 (a) (i))
Offside Front Suspension component mounting prescribed area is corroded but not considered excessive jacking point (5.3.6 (a) (i))
Offside Rear Subframe mounting prescribed area is corroded but not considered excessive inner sill (5.3.6 (a) (i))
Parking brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (1.4.2 (a) (i))
Parking brake efficiency below requirements (1.4.2 (a) (i))
Nearside Front Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive Trailing arm bush mounting (5.3.6 (a) (i))
Nearside Rear Wheel bearing has slight play (5.1.3 (a) (i))
Offside Front Service brake binding but not excessively (1.2.1 (f))
Offside Front Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive Trailing arm bush mounting (5.3.6 (a) (i))
Offside Front Outer Drive shaft joint constant velocity boot split or insecure, no longer prevents the ingress of dirt *Insecure* (6.1.7 (g) (ii))
Offside Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))
Parking brake efficiency below requirements (1.4.2 (a) (i))
Nearside Front Brake hose connection leaking on a hydraulic braking system (1.1.12 (c) (ii)) DANGEROUS
Nearside Front Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive Trailing arm bush mounting (5.3.6 (a) (i))
Nearside Rear Wheel bearing has slight play (5.1.3 (a) (i))
Offside Front Service brake binding but not excessively (1.2.1 (f))
Offside Front Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive Trailing arm bush mounting (5.3.6 (a) (i))
Nearside Rear Brake hose ferrule excessively corroded (1.1.12 (f) (i))
Nearside Rear Upper Suspension component mounting prescribed area excessively corroded significantly reducing structural strength *Spring mounting* (5.3.6 (a) (i))
Offside Front Position lamp not working (4.2.1 (a) (ii))
Offside Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))
Offside Rear Brake hose ferrule excessively corroded (1.1.12 (f) (i))
Offside Rear Upper Suspension component mounting prescribed area excessively corroded significantly reducing structural strength *Spring mounting* (5.3.6 (a) (i))
Parking brake efficiency below requirements (1.4.2 (a) (i))
Nearside Front Brake hose connection leaking on a hydraulic braking system (1.1.12 (c) (ii)) DANGEROUS
Front Exhaust has a minor leak of exhaust gases (6.1.2 (a))
Nearside Front Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive *Trailing arm bush mounting* (5.3.6 (a) (i))
Nearside Rear Wheel bearing has slight play (5.1.3 (a) (i))
Offside Front Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive *Trailing arm bush mounting* (5.3.6 (a) (i))
Anti-lock braking system warning lamp indicates an ABS fault (1.6 (b))
Central Front Power steering pipe/hose leaking (2.1.5 (a))
Nearside Front Lower Suspension arm ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))
Nearside Front Suspension arm ball joint excessively worn (5.3.4 (a) (i))
Nearside Rear Brake pipe excessively corroded (1.1.11 (c))
Offside Front Anti-roll bar pin or bush excessively worn D BUSH (5.3.4 (a) (i))
Offside Front Lower Anti-roll bar ball joint excessively worn (5.3.4 (a) (i))
Offside Front Outer Drive shaft joint constant velocity boot split or insecure, no longer prevents the ingress of dirt insecure (6.1.7 (g) (ii))
Offside Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))
Offside Rear Brake pipe excessively corroded (1.1.11 (c))
Offside Stop lamp(s) not working (4.3.1 (a) (ii))
Parking brake efficiency below requirements (1.4.2 (a) (i))
Registration plate lamp inoperative in the case of a single lamp or all lamps (4.7.1 (b) (ii))
Nearside Rear Upper Suspension component mounting prescribed area is corroded but not considered excessive spring mount (5.3.6 (a) (i))
Offside Front Integral body structure is corroded but structural rigidity is not significantly reduced out rigger (6.1.1 (c) (i))
Offside Front Suspension arm ball joint has slight play (5.3.4 (a) (i))
Offside Rear Upper Suspension component mounting prescribed area is corroded but not considered excessive spring mount (5.3.6 (a) (i))
both rear hand brakes low effort
Offside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Offside Rear chassis corroded
Anti-lock braking system warning lamp indicates an ABS fault (1.6 (b))
Nearside Front Suspension arm ball joint excessively worn (5.3.4 (a) (i))
Nearside Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))
Nearside Track rod end ball joint has excessive play (2.1.3 (b) (i))
Offside Front Anti-roll bar linkage ball joint excessively worn (5.3.4 (a) (i))
Offside Front Outer Drive shaft joint constant velocity boot split or insecure, no longer prevents the ingress of dirt (6.1.7 (g) (ii))
Parking brake efficiency below requirements (1.4.2 (a) (i))
Offside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Offside Rear chassis corroded
both parking brakes low effort
Anti-lock braking system warning lamp indicates an ABS fault (1.6 (b))
Front Windscreen wiper does not clear the windscreen effectively (3.4 (b) (ii))
Nearside Front Anti-lock braking system wheel speed sensor excessively damaged (1.6 (c))
Offside Front Anti-roll bar linkage ball joint excessively worn (5.3.4 (a) (i))
Offside Front Outer Drive shaft joint constant velocity boot split or insecure, no longer prevents the ingress of dirt (6.1.7 (g) (ii))
Integral body structure or chassis has excessive corrosion to the extent that overall security or stability of the body is impaired Both front chassis/body out rigger sections corroded (6.2.2 (d) (ii)) DANGEROUS
Nearside Front Lower Suspension arm ball joint likely to become detached (5.3.4 (a) (ii)) DANGEROUS
Nearside Front Track rod end ball joint worn to the extent there is a serious risk of detachment (2.1.3 (b) (ii)) DANGEROUS
Offside Rear Suspension component missing Suspension bump stop missing (5.3.3 (a) (ii)) DANGEROUS
Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))
Front Brake pad(s) wearing thin (1.1.13 (a) (ii))
Nearside Front Direction indicator lens defective which has no effect on emitted light (4.4.1 (b) (i))
Nearside Rear Wheel bearing has slight play (5.1.3 (a) (i))
Offside Front Brake pipe inadequately clipped or supported (1.1.11 (d) (i))
Offside Front Inner Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Nearside Front Flexible brake hose insecure
Nearside Rear Brake pipe corroded, covered in grease or other material across trailing arm (1.1.11 (c))
Offside Front Vehicle structure is corroded but structural rigidity is not significantly reduced jacking point (6.1.1 (c) (i))
Offside Rear Brake pipe corroded, covered in grease or other material across trailing arm (1.1.11 (c))
Nearside Rear Brake pipe excessively corroded to flexy (1.1.11 (c))
Nearside Rear Coil spring fractured or broken (5.3.1 (b) (i))
Nearside Rear Registration plate lamp inoperative in the case of a single lamp or all lamps (4.7.1 (b) (ii))
Offside Front Track rod end ball joint has excessive play (2.1.3 (b) (i))
Offside Front Tyre(s) of different sizes are fitted on the same axle. (5.2.3 (b))
Offside Rear Brake pipe leaking on a hydraulic braking system to flexy (1.1.11 (b) (ii)) DANGEROUS
Nearside Rear Brake pipe corroded, covered in grease or other material across trailing arm (1.1.11 (c))
Offside Front Vehicle structure is corroded but structural rigidity is not significantly reduced jacking point (6.1.1 (c) (i))
Offside Rear Brake pipe corroded, covered in grease or other material across trailing arm (1.1.11 (c))
Nearside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Offside Front Suspension component mounting prescribed area is corroded but not considered excessive jacking point (5.3.6 (a) (i))
Offside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Nearside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Offside Front Seat belt anchorage prescribed area is corroded but not considered excessive jacking point (7.1.1 (a) (i))
Offside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Nearside Front Track rod end ball joint has excessive play (2.1.3 (b) (i))
Offside Front Lower Steering linkage ball joint has excessive play (2.1.3 (b) (i))
Offside Rear Parking brake inoperative on one side (1.4.1 (a))
Parking brake efficiency less than 50% of the required value (1.4.2 (a) (ii)) DANGEROUS
Nearside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Offside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Nearside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Offside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Offside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Anti-lock braking system component excessively damaged (1.6 (e))
Nearside Front Anti-roll bar linkage ball joint excessively worn droplink (5.3.4 (a) (i))
Nearside Front Outer Drive shaft joint constant velocity boot split or insecure, no longer prevents the ingress of dirt (6.1.7 (g) (ii))
Nearside Rear Shock absorbers has a serious fluid leak (5.3.2 (b))
Offside Front Anti-roll bar linkage ball joint excessively worn droplink (5.3.4 (a) (i))
Offside Front Steering linkage ball joint has excessive play (2.1.3 (b) (i))
Offside Rear Shock absorbers has a serious fluid leak (5.3.2 (b))
Front Brake disc in such a condition that it is seriously weakened (1.1.14 (a) (ii)) DANGEROUS
Front Brake pad(s) less than 1.5 mm thick (1.1.13 (a) (ii)) DANGEROUS
Rear Brake disc in such a condition that it is seriously weakened (1.1.14 (a) (ii)) DANGEROUS
Rear Brake pad(s) less than 1.5 mm thick (1.1.13 (a) (ii)) DANGEROUS
Nearside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Offside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Offside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Nearside Front Suspension arm has slight play in a ball joint (2.4.G.2)
Front Brake pad(s) wearing thin (3.5.1g)
Nearside Front Suspension arm has slight play in a ball joint (2.4.G.2)
Rear fog lamp damaged, but still visible from a reasonable distance (1.3.2d)
Nearside Track rod end ball joint has excessive play (2.2.B.1f)
Front Brake pad(s) wearing thin (3.5.1g)
Nearside Front Suspension arm has slight play in a ball joint (2.4.G.2)
Parking brake: parking brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.7)
Rear fog lamp damaged, but still visible from a reasonable distance (1.3.2d)
Tyre worn close to the legal limit (4.1.E.1)
Rear fog lamp lense broken
Slight play at o/s steering arm
Play at n/s steering arm
Nearside rear parking brake recording little or no effort (3.7.B.6a)
Offside rear parking brake recording little or no effort (3.7.B.6a)
Parking brake lever has no reserve travel (3.1.6b)
Windscreen washer provides insufficient washer liquid (8.2.3)
Parking brake: efficiency below requirements (3.7.B.7) DANGEROUS
Play at n/s steering arm
Rear fog lamp lense broken
Slight play at o/s steering arm
Offside Front Track rod end ball joint has excessive play (2.2.B.1f)
Offside Windscreen wiper does not clear the windscreen effectively (8.2.2)
Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.5b)
How Reliable is the Vauxhall Vivaro?
Based on 3,853,716 MOT tests across 280,649 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
SY06 ZFT is a 2006 Vauxhall Vivaro in Silver with a 1,870cc diesel engine. This vehicle has been through 29 MOT tests with a personal pass rate of 55.2%.
Across all 2006 Vauxhall Vivaro models, the average MOT pass rate is 66.1% with a typical mileage of 106,157 miles. This particular vehicle has a lower pass rate than the average for its year, which may indicate maintenance issues worth investigating.
The most common reason a Vauxhall Vivaro fails its MOT is track rod end ball joint has excessive play, accounting for 144,341 recorded failures. If you're considering buying SY06 ZFT, it's worth having these areas checked by a mechanic before committing.
The Vauxhall Vivaro typically stays on UK roads for around 24 years. At 20 years old, this Vauxhall Vivaro is approaching the upper end of the typical lifespan for this model.
Frequently Asked Questions
How do I check the history of SY06 ZFT?
You can check the full history of SY06 ZFT by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was SY06 ZFT registered?
SY06 ZFT is a 2006 Vauxhall Vivaro, first registered on 19 May 2006.
Is SY06 ZFT safe to buy?
The MOT history for SY06 ZFT shows 29 tests with a 55.2% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does SY06 ZFT have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on SY06 ZFT. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.