2007 Audi A6

Brake pipe corroded, covered in grease or other material all pipes (1.1.11 (c))

Front Anti-roll bar linkage pin or bush worn but not resulting in excessive movement both sides (5.3.4 (a) (i))

Front Inner Brake disc worn, but not excessively both sides (1.1.14 (a) (i))

Nearside Front Lower Suspension arm ball joint has slight play (5.3.4 (a) (i))

Nearside Front Lower Suspension arm ball joint has slight play (5.3.4 (a) (i))

Offside Front Wheel bearing slightly noisy (5.1.3 (b) (i))

Rear Brake pad(s) wearing thin both sides (1.1.13 (a) (ii))

under trays

Nearside Rear Service brake binding but not excessively (1.2.1 (f))

Nearside Front Coil spring fractured or broken (5.3.1 (b) (i))

Offside Front Coil spring fractured or broken (5.3.1 (b) (i))

Nearside Rear Service brake binding but not excessively (1.2.1 (f))

Injector seals leaking

Front Brake disc significantly and obviously worn (1.1.14 (a) (i))

Nearside Front Brake pipe excessively corroded from hose to caliper (1.1.11 (c))

Nearside Rear Service brake excessively binding (1.2.1 (f))

Offside Front Brake pipe excessively corroded from hose to caliper (1.1.11 (c))

Offside Front Brake pad(s) less than 1.5 mm thick friction material broken away from metal backing (1.1.13 (a) (ii)) DANGEROUS

Offside Front Outer Drive shaft joint constant velocity boot severely deteriorated (6.1.7 (g) (i))

Rear Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

o/s front brake heat/dust shield insecure

Nearside Front Lower Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Offside Front Lower Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Rear heat sheild slightly loose

Nearside Front Inner Tyre has a cut but not deep enough to reach the ply or cords (5.2.3 (d) (i))

Offside Front Drive shaft joint constant velocity boot severely deteriorated (6.1.7 (g) (i))

undercovers not allowing full inspection of some components

offside front tyre wearing on inner edge

Engine covers fitted obscuring some components in the engine bay

Under-trays fitted obscuring some underside components

both front tyres wearing on inner edge

Offside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Nearside Front Tyre worn close to the legal limit (4.1.E.1)

Nearside Rear Tyre worn close to the legal limit (4.1.E.1)

Offside Front Tyre worn close to the legal limit (4.1.E.1)

Offside Rear Tyre worn close to the legal limit (4.1.E.1)